Internal flow and concentration in neighbouring evaporating binary droplets and rivulets

Pim J. Dekker \aff 1, Duarte Rocha \aff 1, Detlef Lohse \aff 1,2, Christian Diddens \aff 1 · 2025

Read Internal flow and concentration in neighbouring evaporating binary droplets and rivulets by Pim J. Dekker \aff 1, Duarte Rocha \aff 1, Detlef Lohse \aff 1,2, Christian Diddens \aff 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-08820.txt.

Introduction

Pim Dekker, Duarte Rocha, Christian Diddens, and Detlef Lohse study drying drops in a 2025 paper. Drops that sit close together dry more slowly, since each shields the other from the air. Such pairs occur in inkjet printing, spray cooling, and crop spraying.

The team models two-part drops where only one part can dry out. They start with a simpler two-dimensional case of long ridges of liquid. As drying goes on, the uneven flow inside fades with time. The still point in the flow moves toward the center as the contact angle or gap grows, in both the ridge and drop models.

Catalog record

CREATORPim J. Dekker \aff 1, Duarte Rocha \aff 1, Detlef Lohse \aff 1,2, Christian Diddens \aff 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-08820

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Internal flow and concentration in neighbouring evaporating binary droplets and rivulets Pim J. Dekker \aff 1, Duarte Rocha \aff 1, Detlef Lohse \aff 1,2, Christian Diddens \aff 1 Abstract In this paper, the evaporation of neighbouring multi-component droplets or rivulets – often found in applications such as inkjet printing, spray cooling, and pesticide delivery – is studied numerically and theoretically. The proximity induces a shielding effect that reduces individual evaporation rates and disrupts the symmetry of both the concentration profile and the flow field in the liquids. We examine how the symmetry of flow and concentration fields is affected by key parameters, namely the contact angle, the inter-droplet (or inter-rivulet) distance, and the magnitude of surface tension gradient forces (i.e. the Marangoni number). We focus on binary mixtures, such as water and 1,2-hexanediol, where only one component evaporates and evaporation is slow, thereby allowing simplifications to the governing equations. To manage the complexity of the full three-dimensional droplet problem, we begin with a two-dimensional model of neighbouring rivulets. Solving the complete transient equations for rivulets with pinned contact lines and fixed inter-rivulet distance reveals that the asymmetry – quantified by the position of the interfacial stagnation point of the flow – diminishes over time. Using a validated quasi-stationary model, we find, with increasing contact angle and inter-rivulet distance, that the stagnation point migrates closer to the centre, yet it remains unaffected by the Marangoni number. A simplified lubrication model applied to droplets shows similar dependencies on contact angle and distance, although here the stagnation point appears to vary with the Marangoni number. We attribute this dependence to the additional azimuthal flow in droplets, leading to a non-linear evolution of the concentration and therefore a non-trivial dependence of the symmetry on the Marangoni number. \lefttitle P. J. Dekker, D. Rocha, D. Lohse, C. Diddens \righttitle Internal flow and concentration in neighbouring evaporating binary droplets and rivulets \corresau Pim J. Dekker, , Duarte Rocha, keywords 1 Introduction Applications such as inkjet printing, spray cooling and pesticide delivery often involve the evaporation of neighbouring multi-component droplets or rivulets. In these situations, the proximity of the liquid bodies influences the evaporation rate of each droplet or rivulet, thereby altering the flow dynamics within the liquid phase ( Schofield et al. 2020 ; Wray et al. 2020 ; Masoud et al. 2021 ) . A natural first step in understanding these complex systems is to study the evaporation of a single liquid body – a problem that has been extensively investigated for droplets ( Sefiane 2014 ; Brutin & Starov 2018 ; Zang et al. 2019 ; Lohse & Zhang 2020 ; Gelderblom et al. 2022 ; Wilson & D’Ambrosio 2023 ) as well as for rivulets ( Yarin et al. 2006 ; Schofield et al. 2020 ) . For evaporating pure sessile droplets (and rivulets) with a pinned contact line, the geometric singularity at the contact line gives rise to the “coffee-stain” effect ( Deegan et al. 1997 ; Deegan et al. 2000 ; Popov 2005 ) , where liquid and any suspended particles are drawn towards the pinned contact line to compensate for a higher evaporative loss in that region, resulting in a coffee-ring-like deposit. This is often undesirable in applications such as inkjet printing ( Lohse 2022 ) . In the case of a multi-component droplet (or rivulet), selective evaporation can occur. This selective evaporation induces surface tension gradients, which in turn generate Marangoni stresses at the liquid-gas interface ( Scriven & Sternling 1960 ; Hu & Larson 2005 ; Diddens et al. 2017b ; Kim & Stone 2018 ; Marin et al. 2019 ) . The resulting flow generated within the liquid is often much stronger than the flow caused by the “coffee-stain” effect and can either enhance or suppress it, depending on the direction of the Marangoni flow ( Hu & Larson 2006 ; Diddens et al. 2017b ; Mampallil & Eral 2018 ) . In real-world applications, however, the liquid bodies are rarely isolated and are often found in proximity. In such cases, the vapour concentration in the gas phase surrounding the evaporating components is increased near the liquid bodies. This reduces the evaporation rate – characterising the so-called shielding effect – and extends the lifetime of the liquids ( Fabrikant 1985 ; Laghezza et al. 2016 ; Khilifi et al. 2019 ; Hatte et al. 2019 ; Chong et al. 2020 ; Schofield et al. 2020 ; Masoud et al. 2021 ) . This shielding effect disrupts the symmetry of the evaporation-driven flows ( Wray et al. 2020 ; Masoud et al. 2021 ) . While capillary flows in neighbouring pure droplets have been widely studied, Marangoni flows induced by the presence of a second component in the liquid has received less attention. Cira et al. 2015 observed that neighbouring droplets may either attract – under conditions that promote Marangoni contraction ( Karpitschka et al. 2017 ) – or repel one another, depending on the volatility and composition. Moreover, Dekker et al. 2024 reported that preferential pinning on the side further from an adjacent droplet can cause the centres of the droplets to move apart. Our work builds on the experiments of Dekker et al. 2024 , in which the evaporation of two neighbouring droplets of a binary mixture of water and 1,2-hexanediol was investigated. In particular, we develop numerical simulations for both two evaporating droplets and their two-dimensional counterpart, two evaporating rivulets, in order to identify the key parameters that govern the symmetry of the flow field. By employing justified simplifications, we demonstrate that the asymmetry in the internal flow and concentration fields is primarily controlled by three parameters: the contact angle \theta , the inter-droplet (or inter-rivulet) distance b , and the Marangoni number \mathrm{Ma} . Notably, for rivulets, the asymmetry is nearly independent on the Marangoni number, whereas for droplets the dependence is more marked. This paper is structured as follows: In § 2.1 , we introduce the governing equations for the evaporation of rivulets and droplets, and we present transient numerical simulations for rivulets. The slow evaporation motivates the introduction of a simplified quasi-stationary model (§ 3.1 ) and its lubrication version (§ 3.2 ). Section 4 examines the local evaporative flux for droplets (§ 4.1 ) and rivulets (§ 4.2 ), to be used in the simplified models. We then validate the models against transient simulations (§ 5 ) and investigate the stagnation point shift, for rivulets (§ 6.1 , with some analytical results in § 6.1.1 ) and droplets (§ 6.2 ). Finally, we conclude in § 7 . 2 Transient system of equations for evaporating rivulets and droplets 2.1 Underlying dynamical equations We focus on the evaporation of a single or two neighbouring binary droplets (or rivulets) which form a low contact angle \theta with the substrate. Let us consider that: only one component B in the liquid phase can evaporate into the vapour phase; the surface tension monotonically decreases with the concentration of the non-volatile component; and evaporation is slow. Under these assumptions, we avoid complexities arising from Marangoni instabilities ( Diddens et al. 2017b ; Diddens et al. 2024 ; Rocha et al. 2024 ) and we meet the

Read the complete text