Toward Low-Latency, High-Fidelity Calibration of the LIGO Detectors with Enhanced Monitoring Tools

M. Wade, J. Betzwieser, D. Bhattacharjee, L. Dartez, E. Goetz, J. Kissel, L. Sun, A. Viets, M. Carney, E. Makelele, L. Wade · 2025

Read Toward Low-Latency, High-Fidelity Calibration of the LIGO Detectors with Enhanced Monitoring Tools by M. Wade, J. Betzwieser, D. Bhattacharjee, L. Dartez, E. Goetz, J. Kissel, L. Sun, A. Viets, M. Carney, E. Makelele, L. Wade (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-08423.txt.

Introduction

Wade and a team of co-authors speed up the calibration of the LIGO detectors in a 2025 paper. Calibration turns the machines' raw output into trustworthy strain data, the numbers behind a decade of gravitational-wave finds. Speed and reliability have both improved across observing runs.

The paper reviews that history and presents new tools for the fourth observing run. The low-latency pipeline grew more robust and accurate. A fresh monitoring tool watches calibration in real time, spotting drift as it happens. Faster, cleaner strain data means sky alerts and source papers can move sooner. The authors frame the work as infrastructure for the next decade of discoveries.

Catalog record

CREATORM. Wade, J. Betzwieser, D. Bhattacharjee, L. Dartez, E. Goetz, J. Kissel, L. Sun, A. Viets, M. Carney, E. Makelele, L. Wade
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE64 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-08423

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Toward Low-Latency, High-Fidelity Calibration of the LIGO Detectors with Enhanced Monitoring Tools M. Wade, J. Betzwieser, D. Bhattacharjee, L. Dartez, E. Goetz, J. Kissel, L. Sun, A. Viets, M. Carney, E. Makelele, L. Wade Abstract Accurate and reliable calibration of the Advanced LIGO detectors has enabled a plethora of gravitational-wave discoveries over the past decade, starting with the ground-breaking discovery, GW150914. Over the past ten years, the calibrated strain data from Advanced LIGO detectors has become available at a lower latency and with more reliability. In this paper, we discuss the relevant history of Advanced LIGO calibration and introduce new tools that have been developed to enable faster and more robust calibrated strain data products in the current observing run. We discuss improvements to the robustness, reliability, and accuracy of the low-latency calibration pipeline as well as the development of a new tool for monitoring the LIGO calibration in real time. 1 Introduction The direct detection of gravitational waves (GWs) by the Advanced Laser Interferometer Gravitational-wave Observatory (LIGO) [ 1 ] in 2015 marked the beginning of a new era in observational astrophysics and fundamental physics. The first GW detection, GW150914 [ 2 , 3 ] , resulted from the merger of a binary black hole system, confirming a key prediction of general relativity and demonstrating the feasibility of ground-based interferometric GW detection. Since this landmark event, the field has experienced rapid progress, with hundreds of detections of binary black hole and neutron star mergers by the global GW detector network, involving Virgo [ 4 ] and KAGRA [ 5 ] . In the first three observing runs, O1–O3, in total 90 confident detections were made of GWs from compact binary mergers [ 6 ] . The fourth observing run, O4, is ongoing with a nearly doubled detection rate and significant improvement in detector performance [ 7 , 8 ] . After O4, major upgrades are planned in LIGO, Virgo, and KAGRA, with the aim of increasing the sensitivity, as measured by the distance to which a binary neutron star merger event would be seen at a fiducial signal-to-noise ratio, by more than a factor of two. Thus, in the upcoming fifth observing run, O5 [ 9 ] , we expect an order-of-magnitude increase in the number of detections, requiring low-latency and high-quality data products to facilitate rapid astrophysical discoveries. A fundamental component of the success of GW observations is the precise calibration of interferometric data, which reconstructs the raw, digitized electrical output of the detector into an accurate and reliable measure of the dimensionless strain [ 10 , 11 , 12 ] . Calibration accuracy directly impacts source parameter estimation, waveform reconstruction, and tests of general relativity, making it a critical aspect of GW astronomy [ 13 , 14 ] . Miscalibrations can introduce systematic biases, affecting the astrophysical interpretation of detected signals, limiting the reliability of inferred source properties, and leading to deviations from general relativity [ 15 ] . During the detection of GW150914 [ 10 ] and throughout O1–O3, calibration was performed with high accuracy but at high latency, with the most precise strain data becoming available only after careful post-processing with a significant delay on the order of several months. In contrast, current calibration methodologies enable the real-time production of publishable strain data along with a well-quantified systematic error estimate on this strain data.With further sensitivity improvements in GW observatories, which allow for high signal-to-noise ratio observations, the next major challenge is the development of calibration techniques that achieve real-time calibration with an even higher accuracy, ensuring that precision science can be performed immediately upon detection. This advancement will be crucial for multi-messenger astronomy and for rapid source parameter estimation with high fidelity in future observing runs. The paper is organized as follows: section 2 provides an overview of the historical background of calibration in Advanced LIGO, section 3 discusses the challenges and calibration goals in the next observing run, section 4 describes new techniques and tools that have been implemetned to improve the accuracy and latency in LIGO calibration, section 5 discusses calibration requirements in the next generation GW detectors, and we conclude in section 6 . 2 Background and Historical Overview of LIGO Calibration In order to maintain the interferometer at its operating point for extended periods of time, the LIGO detectors depend on a multitude of control loops that actuate on various systems in response to sensor signals in real time. The primary control loop of astrophysical interest interferometrically maintains the difference in Fabry-Pérot arm cavity lengths. This differential arm, or DARM, degree of freedom is most sensitive to gravitational waves, and the control loop responsible for the DARM degree of freedom is referred to as the DARM loop. The DARM loop sensor is the photodetector that measures laser light at the output of the interferometer (anti-symmetric side of the beamsplitter) and the actuators are the quadruple pendulum actuators that move the test masses to keep the Fabry-Pérot cavities on resonance. Displacements in differential arm cavity length, whether from internal (e.g. interferometer actuators) or external (e.g. gravitational waves or noise) sources are encoded in the DARM loop error signal. Calibration is the process of reconstructing the DARM displacement, \Delta L_{\textrm{free}} , from the DARM loop error signal, d_{\textrm{err}} . The DARM loop error signal and the DARM displacement are related by \tilde{d}_{\rm err}(f)=\frac{\Delta\tilde{L}_{\textrm{free}}(f)}{R(f)}~, (1) where R(f) is the frequency-dependent DARM loop response (also commonly referred to as the “detector response”) and throughout the paper a tilde refers to the Fourier transform of a time-domain signal. While d_{\textrm{err}} is measured continually, R is only fully measured infrequently during breaks in gravitational-wave data collection. A model of R is constructed during these breaks and is used to extrapolate to other times. Therefore, the accuracy of the calibration is dependent on the accuracy of the modeled detector response R . That model, maintained by the LIGO Calibration team, is validated in the frequency band in which the detector is most sensitive to gravitational waves (10 Hz to 5,000 Hz). During observing runs, the detector response typically does not change significantly, but small changes in the detector response can impact the overall systematic error and uncertainty in the reconstructed \Delta L_{\rm free} signal and therefore must be closely monitored. The detector response varies on time scales longer than one second, due to, for example, thermal effects, alignment fluctuations, and seismic activity. The time dependence of the response is tracked by constant measurements of the response using fiducial displacements (see section 2.1.2 ) at strategically selected frequencies in order to minimize any disturbances to the collection of astrophysical signals. The model of the detector response is then reconstituted, taking the tracked temporal changes into account. The final reconstructed \Delta L_{\rm free} uses this reconstituted detector response in order to achieve the highest level of accuracy on the calibrated data. The effort to produce an accurate calibration comprises maintaining absolute reference standards, taking frequent measurements of the individual DARM loop components, constructing and validating a reliable model of the detector response, deploying an application of ( 1 ) to reconstruct \Delta L_{\rm free} , and estimating the systematic error and uncertainty associated with the detector response model. 2.1

Read the complete text