Measurements of semileptonic and leptonic beauty meson decays at Belle II

Tommy Martinov, on behalf of the Belle II collaboration · 2025

Read Measurements of semileptonic and leptonic beauty meson decays at Belle II by Tommy Martinov, on behalf of the Belle II collaboration (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-08197.txt.

Introduction

Tommy Martinov presents three recent Belle II measurements of beauty meson decays in this 2025 paper, on behalf of the Belle II collaboration. B mesons are particles that contain a bottom quark, and their decays test the Standard Model of particle physics. All results use the full Run 1 data set, in which electron and positron collisions produced pairs of B mesons. The data total 365 inverse femtobarns.

One result measures the rate of a rare leptonic decay, where a charged B meson turns into a tau lepton and a neutrino. The team found those events with a hadronic tagging method. Two further results use semileptonic decays, where a lepton and neutrino appear beside other particles. One pins down a key mixing value, written |Vcb|, with an inclusive tagging method. The other tests lepton flavour universality by comparing decay rates across lepton types.

Catalog record

CREATORTommy Martinov, on behalf of the Belle II collaboration
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE14 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-08197

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Measurements of semileptonic and leptonic beauty meson decays at Belle II Tommy Martinov, on behalf of the Belle II collaboration Abstract Three recent measurements of leptonic and semileptonic decays of B B mesons are presented here. All results use the full Belle II Run 1 e + ​ e − → Υ ⁡ ( 4 ​ S ) → B ​ B ¯ e^{+}e^{-}\to\Upsilon(4S)\to B\bar{B} dataset of 365 fb -1 . We present one leptonic B B decay result: a measurement of the B + → τ ​ ν B^{+}\to\tau\nu branching fraction with a hadronic tagging method; and two semileptonic B B decay results: a determination of | V c ​ b | |V_{cb}| using B → D ​ ℓ ​ ν B\to D\ell\nu decays with an inclusive tagging method and a test of lepton flavour universality with measurements of ℛ ⁡ ( D + ) \mathcal{R}\left(D^{+}\right) and ℛ ⁡ ( D ∗ ⁣ + ) \mathcal{R}\left(D^{*+}\right) using semileptonic B B tagging. 1 CKM matrix elements |V_{cb}| and |V_{ub}| The Cabibbo–Kobayashi–Maskawa (CKM) matrix is a 3\times 3 unitary matrix which is the source of all flavour-violating interactions in the quark sector of the Standard Model (SM). The CKM matrix was introduced in order to explain the experimentally observed charge-parity violation effects. Precise measurements of the magnitudes of all CKM matrix elements are crucial to test the SM. The two elements known with the lowest precision are |V_{ub}| and |V_{cb}| . The magnitudes of these two elements are usually measured via semileptonic B meson decays either using an exclusive method, where a specific meson is reconstructed (for instance, a \pi to measure |V_{ub}| ), or an inclusive method where no explicit requirements are applied to the hadronic system. The two methods yield values which differ by about 3\sigma for both |V_{ub}| and |V_{cb}| [ 1 ] . The value of |V_{ub}| can also be measured via purely leptonic B decays which which have a negligible theoretical uncertainty. 1.1 Measurement of |V_{cb}| via B\to D\ell\nu decays The value of |V_{cb}| is commonly extracted via B\to D^{*}\ell\nu transitions which have a larger branching fraction and therefore offer a larger data set to perform the measurement. Nevertheless, studying B\to D\ell\nu decays yields several advantages. The D^{*} meson is reconstructed via its decays to a D meson and a low-momentum \pi whose reconstruction represents the leading systematic uncertainty in |V_{cb}| measurements, an issue which is avoided when using B\to D\ell\nu decays. Furthermore, lattice QCD predictions of B\to D\ell\nu form factor parameters are more precise than for B\to D^{*}\ell\nu decays. B\to D\ell\nu decays can be studied through various parameters such as q^{2} , the invariant mass squared of the leptonic system, defined as q^{2}=(p_{\ell}+p_{\nu})^{2} , where p_{\ell} and p_{\nu} are the lepton and neutrino four-momenta respectively. Using the B and D meson masses m_{B} and m_{D} , the recoil parameter w is defined as w=\frac{m_{B}^{2}+m_{D}^{2}-q^{2}}{2m_{B}m_{D}}. (1) The B\to D\ell\nu differential decay rate as a function of w is expressed as [ 2 ] \frac{d\Gamma(B\to D\ell\nu)}{dw}=\frac{G_{F}^{2}m_{D}^{3}}{48\pi^{3}}(m_{B}+m_{D})^{2}(w^{2}-1)^{3/2}\eta_{\rm EW}^{2}\mathcal{G}^{2}(w)|V_{cb}|^{2}, (2) where, \eta_{\rm EW}=1.0066\pm 0.0002 is the electroweak correction [ 3 ] and \mathcal{G}(w) is the B\to D\ell\nu form factor. The Belle II measurement is performed by reconstructing both B^{0} and B^{+} decays without explicitly reconstructing the partner B meson stemming from the e^{+}e^{-}\to\Upsilon(4S)\to B\bar{B} process. This method, known as inclusive tagging , allows to maximise the number of events available for the measurement. Charged and neutral D mesons are reconstructed via the decays D^{+}\to K^{-}\pi^{+}\pi^{+} and D^{0}\to K^{-}\pi^{+} . The signal is extracted with a two-dimensional fit to w and the \cos\theta_{BY} variable defined as \cos\theta_{BY}=\frac{2E^{*}_{B}E^{*}_{Y}-m_{B}^{2}-m_{Y}^{2}}{2|p_{B}^{*}||p_{Y}^{*}|}, (3) where Y represents the D\ell two-body system and E^{*} and p^{*} are the energies and momenta of the B meson and Y system in the centre-of-mass frame. The postfit 2D w:\cos\theta_{BY} distribution is shown in Figure 1 . The fit is simultaneously performed on four separate channels: D^{0}e^{-} , D^{0}\mu^{-} , D^{+}e^{-} and D^{+}\mu^{-} to extract the individual B^{0}\to D^{+}\ell^{-}\nu and B^{-}\to D^{0}\ell^{-}\nu branching fractions and a lepton flavour universality (LFU) test. The branching fractions are compared to the latest Heavy Flavour Averaging Group (HFLAV) averages [ 1 ] in Table 1 and the LFU test reads: \mathcal{B}(B\to De\nu)/\mathcal{B}(B\to D\mu\nu)=1.02\pm 0.03 . Figure 1: Fitted distribution of \cos\theta_{BY} in bins of w in the D^{0}e^{-} channel. The black points show the Belle II data. The stacked histograms are simulated events. The true and fake D components respectively represent events with a correctly reconstructed D meson which doesn’t stem from a B\to D^{(*)}\ell\nu decay and events with a misreconstructed D meson. The panel at the bottom shows the data – simulation difference normalised to the total estimated uncertainty. Table 1: B\to D\ell\nu branching fractions as extracted from the fit compared to the latest HFLAV averages [ 1 ] . Belle II HFLAV \mathcal{B}(B\to D^{-}\ell^{+}\nu) (%) 2.06\pm 0.12 2.12\pm 0.06 \mathcal{B}(B\to\bar{D}^{0}\ell^{+}\nu) (%) 2.31\pm 0.10 2.21\pm 0.06 The differential decay rate \Delta\Gamma/dw in 10 bins of w is obtained from the same fit. The values \Delta\Gamma/dw are fitted to the differential decay rate expressed using the Bourrely, Caprini, Lellouch (BCL) [ 4 ] form factor parametrisation via a \chi^{2} fit. In addition, lattice QCD constraints computed by the FMILC [ 5 ] and HPQCD [ 6 ] collaborations are included in the fit. The fitted differential decay rate is illustrated in Figure 2 . From this fit, a value of |V_{cb}| is extracted, |V_{cb}|_{\rm BCL}=(39.2\pm 0.8)\times 10^{-3}. (4) which can be compared to the exclusive and inclusive averages [ 1 ] , |V_{cb}|_{\rm excl.}=(39.77\pm 0.46)\times 10^{-3} and |V_{cb}|_{\rm incl.}=(41.97\pm 0.48)\times 10^{-3} . Figure 2: Differential decay rate fit. The black points are the 10 values of \Delta\Gamma/dw extracted from the 2D fit described in the text. The green line represents the central value of the fitted distribution using the BCL form factor parametrisation and the green bands represent the 1\sigma , 2\sigma and 3\sigma uncertainties from darker to lighter. 1.2 Measurement of the B^{+}\to\tau\nu branching fraction Purely leptonic B meson decays represent the theoretically cleanest channel to measure |V_{ub}| but they are helicity suppressed which makes them extremely rare and therefore hard to study with the available datasets. The B^{+}\to\ell^{+}\nu branching fraction is expressed as \mathcal{B}(B^{+}\to\ell^{+}\nu_{\ell})=\frac{G_{F}^{2}m_{B}}{8\pi}m_{\ell}^{2}\left(1-\frac{m_{\ell}^{2}}{m_{B}^{2}}\right)^{2}f_{B}^{2}|V_{ub}|^{2}\tau_{B}, (5) where m_{\ell} is the mass of the lepton, f_{B}=190\pm 1.3 MeV [ 7 ] is the B meson decay constant which can be extracted from lattice QCD and \tau_{B} is the B meson lifetime. So far, no individual measurement of \mathcal{B}(B^{+}\to\ell^{+}\nu_{\ell}) has ever crossed the 5\sigma discovery threshold. The Belle II measurement [ 8 ] is performed by reconstructing the partner B meson in its hadronic decay channels (a method called hadronic tagging [ 12 ] ). While it reduces the reconstruction efficiency significantly this strategy is necessary to constrain the event kinematics despite the presence of multiple final-state undetected neutrinos on the signal side. The \tau lepton is reconstructed in four channels to maximise the total efficiency: \tau\to e\nu\nu , \tau\to\mu\nu\nu , \tau\to\pi\nu and \tau\to\rho\nu . The four channels amount to a total of 71.5\% of the total \tau decay rate [ 9 ] . The signal is extracted from a 2D fit to the E_{\rm ECL}^{\rm extra} and M_{\rm miss}^{2} variables which are respectively defined as

Read the complete text