Collision-Free Trajectory Planning and control of Robotic Manipulator using Energy-Based Artificial Potential Field (E-APF

Adeetya Uppal, Rakesh Kumar Sahoo*, Manoranjan Sinha · 2025

Read Collision-Free Trajectory Planning and control of Robotic Manipulator using Energy-Based Artificial Potential Field (E-APF by Adeetya Uppal, Rakesh Kumar Sahoo*, Manoranjan Sinha (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-07323.txt.

Introduction

Adeetya Uppal and co-authors describe a way to steer a robot arm so it reaches its goal without hitting obstacles. Their 2025 paper builds on the artificial potential field method, which treats the goal as a pull and obstacles as a push. Older versions can stall in local minima or shake near obstacles, so the team adds energy terms that depend on both position and speed.

The method is paired with a planner that cuts jerk and run time while respecting speed and acceleration limits. Tests in simulation use a seven-joint Kinova Gen3 arm working among obstacles. The arm moves smoothly, on time, and without collisions. The authors see the work as a base for later tests on real hardware.

Catalog record

CREATORAdeetya Uppal, Rakesh Kumar Sahoo*, Manoranjan Sinha
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-07323

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Collision-Free Trajectory Planning and control of Robotic Manipulator using Energy-Based Artificial Potential Field (E-APF) Thanks: *Corresponding author. Email address: [email protected] (Rakesh Kumar Sahoo) Adeetya Uppal, Rakesh Kumar Sahoo*, Manoranjan Sinha Abstract Robotic trajectory planning in dynamic and cluttered environments remains a critical challenge, particularly when striving for both time efficiency and motion smoothness under actuation constraints. Traditional path planner, such as Artificial Potential Field (APF), offer computational efficiency but suffer from local minima issue due to position-based potential field functions and oscillatory motion near the obstacles due to Newtonian mechanics. To address this limitation, an Energy-based Artificial Potential Field (APF) framework is proposed in this paper that integrates position and velocity-dependent potential functions. E-APF ensures dynamic adaptability and mitigates local minima, enabling uninterrupted progression toward the goal. The proposed framework integrates E-APF with a hybrid trajectory optimizer that jointly minimizes jerk and execution time under velocity and acceleration constraints, ensuring geometric smoothness and time efficiency. The entire framework is validated in simulation using the 7-degree-of-freedom Kinova Gen3 robotic manipulator. The results demonstrate collision-free, smooth, time-efficient, and oscillation-free trajectory in the presence of obstacles, highlighting the efficacy of the combined trajectory optimization and real-time obstacle avoidance approach. This work lays the foundation for future integration with reactive control strategies and physical hardware deployment in real-world manipulation tasks. I Introduction Robotic trajectory planning in dynamic and cluttered environments is a fundamental challenge in autonomous systems. As robots are increasingly deployed in unstructured environments for applications such as assistive manipulation, warehouse automation, and collaborative tasks, the need for generating smooth, dynamically feasible, and time-efficient trajectories becomes crucial. These trajectories must comply with actuation constraints, ensuring real-time performance while navigating around obstacles. Traditional approaches [ 1 ] often struggle to guarantee real-time adaptability and collision-free trajectory without sacrificing motion smoothness or computational efficiency [ 2 ] . These challenges highlight the need for a path planning framework that ensures robust, safe, and optimal performance in a dynamic environment [ 3 ] . The Artificial Potential Field (APF) method is a widely favoured path planning approach of robot due to its computational efficiency and real-time trajectory adjustment in the presence of static and moving obstacles. The fundamental principle involves modelling an artificial landscape where the goal exerts an attractive force and obstacles generate repulsive forces, guiding the robot toward the target while avoiding collisions [ 4 ] . However, traditional APF formulations, which rely solely on position-based potential functions, suffer from local minima trap and oscillatory behaviour near obstacles [ 5 ] . To address these challenges, numerous modifications of APF method have been proposed in the literature. These include redefining the potential functions such as employing superquadric potential field [ 6 ] and rotational potential field [ 7 ] to reduce or eliminate local minima. Alternatively, search based techniques like simulated annealing [ 8 ] and potential gradient descent method [ 9 ] have been explored in literature to escape from local minima traps. Despite these modifications improve the robustness of traditional APF path planners, they introduce computational complexity and may require intricate tuning which limit their practical implementation. In this paper we have introduced an Energy-based Artificial Potential Field (E-APF) framework that integrates both position and velocity-dependent potential functions to address the inherent limitations of traditional APF. By formulating the attractive and repulsive potential fields in terms of total mechanical energy, the E-APF ensures dynamic adaptability and effectively mitigates the local minima and oscillatory issues commonly observed in position-dependent potential field. To ensure smooth and time-optimal motion, the E-APF is coupled with a hybrid trajectory optimization framework that jointly minimizes jerk and execution time while satisfying velocity and acceleration constraints. The proposed framework is implemented and validated on a 7-degree-of-freedom Kinova Gen3 robotic manipulator in the presence of 3 obstacles. The remainder of the paper is structured as follows. Section II presents an overview of the kinematic and dynamic model of the Kinova Gen3 Robotic manipulator. Section III introduces the Energy-based APF and the time-optimal and minimum jerk trajectory optimization is detailed in Section IV. Section V describes the implementation of a Computed torque control strategy for accurate trajectory tracking. Finally, simulation results are presented in Section VI highlighting the practical viability of the method. II Kinematic and Dynamic Modeling of the Kinova Gen3 Robotic Manipulator The kinematic model of a robotic system describes the geometric relation between the robot’s joint parameters and end-effector’s position and orientation. This enables transformations, between the Cartesian space and the joint space, essential for the control and motion planning of a n -DOF robotic manipulator, such as the Kinova Gen3 robotic arm. To formulate the kinematic model, a local coordinate frame is assigned to each link of the robotic manipulator using the modified Denavit–Hartenberg (D-H) convention. This convention employs four parameters for each link i : \theta_{i} denotes joint angle, d_{i} denotes link offset, \alpha_{i-1} denotes link twist, and a_{i-1} denotes link length. The D-H parameters define the spatial relationship between two successive links and are used to construct the homogeneous transformation matrix {}^{i}_{i-1}T , which describes the coordinate transformation from frame i-1 to frame i . This transformation is expressed as a sequence of elementary operations as shown below: {}^{i}_{i-1}T=\text{R}_{x_{i-1}}(\alpha_{i-1})\times\text{D}_{x_{i-1}}(a_{i-1})\times\text{R}_{z_{i}}(\theta_{i})\times\text{D}_{z_{i}}(d_{i}) where \text{R}_{x_{i-1}} and \text{R}_{z_{i}} denote the rotation matrices about the x - and z -axes, respectively, and \text{D}_{x_{i-1}} and \text{D}_{z_{i}} represent the translations along the x - and z -axes, respectively. Each transformation matrix defines the position and orientation of one link relative to the previous one. By recursively multiplying these transformations, the cumulative transformation to the end-effector frame from the base frame can be determined: {}^{0}_{n}T={}^{0}_{1}T\times{}^{1}_{2}T\times{}^{2}_{3}T\cdots{}^{n-1}_{n}T The resulting matrix {}^{0}_{n}T represents the pose (position and orientation) of the end-effector with respect to the base coordinate frame of the robot. While the kinematic model describes the end-effector’s motion based on joint angles without considering the force and torque causing the motion, the dynamic model accounts for the force and torque acting on the system such as inertial effects, Coriolis and centrifugal forces, and gravitational effects. To derive the dynamic equations of motion, the Euler–Lagrange formulation based on energy functions is used as it is suitable for robot system with holonomic constraints. The Euler-Lagrange equation is expressed as, \frac{d}{dt}\left(\frac{\partial\mathcal{L}}{\partial\dot{q}_{i}}\right)-\frac{\partial\mathcal{L}}{\partial q_{i}}=0,\quad\text{for }i=1,2,\ldots,n (1) Here, \mathcal{L} denotes the Lagrangian of the system, which is defined as the difference between the total kinetic energy E and potential energy V as shown below. \mathcal{L}(q,\dot{q})=E(q,\dot{q})-V(q) (2) For an n-link robotic manipulator, the total kinetic energy of the system comprises both translational and rotational components associated with each link. The total kinetic energy can be mathematically written as: E=\sum_{i=1}^{n}\left(\frac{1}{2}m_{i}v_{i}^{T}v_{i}+\frac{1}{2}\omega_{i}^{T}\mathbf{I}_{i}\omega_{i}\right) (3) where m_{i} denotes the mass of i -th link, v_{i} and \omega_{i} are its linear and angular velocity vectors, and \mathbf{I}_{i} represents the inertia matrix of the i -link expressed in its local coordinate frame. To map the joint velocities \dot{q}\in\mathbf{R}^{n} to the cartesian velocities of each link, Jacobian matrices are used. \mathbf{J}_{v_{i}}(q)\in\mathbf{R}^{3\times n} and \mathbf{J}_{\omega_{i}}(q)\in\mathbf{R}^{3\times n} denote the translational and rotational Jacobians. Substituting this in the expression of total kinetic energy as: E=\frac{1}{2}\dot{q}^{T}\left[\sum_{i=1}^{n}\left(m_{i}\boldsymbol{J}_{v_{i}}^{T}\boldsymbol{J}_{v_{i}}+\boldsymbol{J}_{\omega_{i}}^{T}\boldsymbol{R}_{i}\boldsymbol{I}_{i}\boldsymbol{R}_{i}^{T}\boldsymbol{J}_{\omega_{i}}\right)\right]\dot{q} (4) The expression of total kinetic energy 4 can be written in compact form as shown below. E=\frac{1}{2}\dot{q}^{T}M(q)\dot{q} (5) where M(q)\in\mathbf{R}^{n\times n} is the configuration-dependent inertia matrix of the

Read the complete text