Threshold dynamics in time-delay systems: polynomial β \beta -control in a pressing process and connections to blow-up

Masato Kimura, Hirotaka Kuma, Yikan Liu, Kazunori Matsui, Masahiro Yamamoto, Zhenxing Yang · 2025

Read Threshold dynamics in time-delay systems: polynomial β \beta -control in a pressing process and connections to blow-up by Masato Kimura, Hirotaka Kuma, Yikan Liu, Kazunori Matsui, Masahiro Yamamoto, Zhenxing Yang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-07268.txt.

Introduction

Masato Kimura and co-authors study a press controller haunted by small delays in a 2025 paper. Straightening machines press metal into line, but communication lags inside the control loop can push the press too far. Standard linear speed control handles the lag poorly.

Their generalized beta-control replaces the linear rule with a polynomial one, bending the response as the error grows. The closed loop becomes a delay differential equation, which the team scales and analyzes for its basic behavior. Experiments point to a threshold starting speed: below it the press settles cleanly, above it overshoots. That threshold becomes a conjecture, then the spine of a control algorithm that respects speed limits. A final thread ties threshold behavior to finite-time blow-up, linking factory control to a wider mathematics of delay.

Catalog record

CREATORMasato Kimura, Hirotaka Kuma, Yikan Liu, Kazunori Matsui, Masahiro Yamamoto, Zhenxing Yang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-07268

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Threshold dynamics in time-delay systems: polynomial β \beta -control in a pressing process and connections to blow-up Masato Kimura, Hirotaka Kuma, Yikan Liu, Kazunori Matsui, Masahiro Yamamoto, Zhenxing Yang Abstract This paper addresses a press control problem in straightening machines with small time delays due to system communication. To handle this, we propose a generalized β \beta -control method, which replaces conventional linear velocity control with a polynomial of degree β ≥ 1 \beta\geq 1 . The resulting model is a delay differential equation (DDE), for which we derive basic properties through nondimensionalization and analysis. Numerical experiments suggest the existence of a threshold initial velocity separating overshoot and non-overshoot dynamics, which we formulate as a conjecture. Based on this, we design a control algorithm under velocity constraints and confirm its effectiveness. We also highlight a connection between threshold behavior and finite-time blow-up in DDEs. This study provides a practical control strategy and contributes new insights into threshold dynamics and blow-up phenomena in delay systems. Keywords: Press control, Delay differential equation, Blow-up 2020 Mathematics Subject Classification: 34H05, 34K35, 93C43, 34K99 1 Introduction Optimal control is essential for modern automated manufacturing, where increasingly sophisticated technologies demand maximum efficiency. Although control theory has a long history, it continues to evolve in response to technological advancements. The mathematical modeling and analysis of the target system play a critical role in developing effective control algorithms. When the process at the core of the system is described by a well-structured mathematical model, it becomes possible to propose robust strategies for optimal control. One of the most widely used methods is PID control [ 1 , 3 ] , which remains prevalent in industrial applications. However, time delays—arising from communication and computation in feedback loops—can destabilize such systems, leading to overshoot, instability, or even chaotic behavior. Delay differential equations (DDEs) [ 2 , 11 ] provide a mathematical framework for modeling systems with time delays and have been extensively studied, especially in engineering contexts [ 6 , 10 ] . Nonetheless, the dynamics of DDEs are often difficult to analyze, even for simple cases. Challenges such as instability, chaos [ 7 , 13 , 14 ] , and finite-time blow-up [ 5 , 4 , 8 ] remain active areas of research. In this study, we address a press control problem in a straightening machine, modeled by a specific class of DDEs, where the initial velocity serves as the control variable. We first derive a nondimensionalized DDE model and clarify the basic mathematical properties of its solutions. Numerical experiments suggest the existence of a critical threshold for the initial value that separates two types of behavior: overshooting and asymptotic convergence. We formulate this observation as a conjecture and, under its validity, propose an effective control algorithm. This method also accommodates a constraint on maximum velocity. Moreover, the conjectured threshold phenomenon has another implication. It enables an interpretation of the system’s behavior in terms of finite-time blow-up. We demonstrate a connection between the press control problem and blow-up dynamics, offering new insight into blow-up phenomena in DDEs. The structure of the paper is as follows. Section 2 introduces the industrial context and formulates the control problem based on empirical data, presenting a generalized \beta -control model. Section 3 derives the nondimensionalized DDE, analyzes its mathematical properties, and proposes the central conjecture based on numerical evidence. Section 4 applies the conjecture to construct a practical control algorithm under a maximum velocity constraint, validated through further simulations. Section 5 reinterprets these results as finite-time blow-up phenomena for a related DDE, allowing us to analyze blow-up rates and threshold behavior. Finally, Section 6 summarizes our results and reflects on the broader significance of this work, illustrating how a practical industrial problem can lead to new mathematical developments in control and delay systems. 2 Industrial Background and Problem Formulation 2.1 Straightening press and process description We focus on a straightening press machine used to correct bends in heat-treated automotive shafts. These shafts often exhibit residual deformation after heat treatment, which can lead to undesirable vibration and noise during operation. Thus, precise straightening is necessary. The straightening process typically involves the following steps: 1. Measure the shaft strain using several sensors placed along its length. 2. Determine the pressing position, direction, and stroke length required to straighten the shaft. 3. Control the press machine to perform pressing according to the parameters decided in step 2. 4. Repeat steps 1–3 until the strain falls below the specified tolerance. For more details on shaft strain measurement, see [ 9 , 12 , 15 ] . In this study, we focus on step 3: determining how to accurately press the shaft by a prescribed stroke. In particular, we consider the case where the press velocity V is determined by the following generalized control rule: \displaystyle V(X)=v_{0}\left|\frac{\ell-X}{\ell}\right|^{\beta}, (2.1) where \beta\geq 1 , v_{0}>0 is the initial velocity, \ell is the target pressing stroke, and X=X(t) is the position measured by the sensor at time t\geq 0 with the initial position X(0)=0 . Figure 1 : The target pressing stroke (red line) and the actual sensor position (blue line), illustrating the overshoot phenomenon due to time delay. The press is stopped after overshooting. Figure 2 : Schematic of signal flow in the straightening press machine. We refer to this control law as the \beta -control method in this paper. In conventional control systems, a simpler rule with exponent \beta=1 was often employed for ease of implementation. Our proposed method generalizes this by introducing the exponent \beta explicitly, allowing for more flexible and precise control of the press dynamics. 2.2 Modeling time delay and overshoot phenomena (a) (b) Figure 3 : Example of press machine data. (a) Comparison of the actual and commanded press velocities. The actual velocity is valid only after t=250 ms. (b) Estimation of time delay \tau as the horizontal gap between the two curves. The average delay is approximately \tau=40 ms. In the absence of delay, the differential equation dX/dt=V(X) with X(0)=0 ensures that X(t) converges to \ell as t\to\infty . However, in practice, the system often overshoots the target position, as shown in Figure 1 . One major cause is the time delay between position measurement and actuation, introduced by signal transmission, data processing, and machine characteristics (Figure 2 ). Figure 1 is based on experimental data from Towa Seiki Co. Ltd. using a conventional control algorithm. Let x(t) denote the true shaft position at time t . The position data used in the velocity command is then modeled as \displaystyle X(t)=x(t-\tau), (2.2) where \tau>0 is the time delay. The delay \tau can be estimated by comparing the commanded velocity V(X) with the measured actual press velocity V_{\text{meas}} under controlled conditions. Figure 3 illustrates an example. From the data after t=250 ms, the delay is estimated to be approximately \tau=40 ms. Hereafter, we assume that \tau is a given positive constant independent of time and the velocity command. We now formulate a delay differential equation (DDE) that captures this behavior. Given parameters v_{0},\ell,\tau>0 with v_{0}\tau<\ell , and \beta\geq 1 , the press velocity dx/dt is assumed to be given by: \displaystyle\frac{dx}{dt}(t) \displaystyle=\begin{cases}{\displaystyle v_{0}\left|\frac{\ell-x(t-\tau)}{\ell}\right|^{\beta}}&(t>\tau),\\ v_{0}&(0\leq t\leq\tau),\end{cases} (2.3) \displaystyle x(0) \displaystyle=0. (2.4) The condition v_{0}\tau<\ell ensures

Read the complete text