Applying the Spectral Method for Modeling Linear Filters: Butterworth, Linkwitz–Riley, and Chebyshev filters

K. A. Rybakov, E. D. Shermatov · 2025

Read Applying the Spectral Method for Modeling Linear Filters: Butterworth, Linkwitz–Riley, and Chebyshev filters by K. A. Rybakov, E. D. Shermatov (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-07206.txt.

Introduction

Konstantin Rybakov and Egor Shermatov model linear filters spectrally in two thousand twenty five. Their technique rests on the spectral form of linear systems. Input and output signals become orthogonal expansions of basis functions. Filters are described by two dimensional non stationary transfer functions.

The output signal is then modeled in continuous time. Three classic filter families test the approach in depth. Butterworth, Linkwitz-Riley, and Chebyshev filters all pass the checks. Different filter orders are covered in the tests as well. The method offers a unified way to simulate filter behavior.

Catalog record

CREATORK. A. Rybakov, E. D. Shermatov
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE59 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-07206

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Applying the Spectral Method for Modeling Linear Filters: Butterworth, Linkwitz–Riley, and Chebyshev filters K. A. Rybakov, E. D. Shermatov Abstract Moscow Aviation Institute (National Research University); 125993, Moscow, Volokolamskoe Hwy, 4; [email protected], [email protected] Abstract. This paper proposes a new technique for computer modeling linear filters based on the spectral form of mathematical description of linear systems. It assumes that input and output signals of the filter are represented as orthogonal expansions, while filters themselves are described by two-dimensional non-stationary transfer functions. This technique allows one to model the output signal in continuous time, and it is successfully tested on the Butterworth, Linkwitz–Riley, and Chebyshev filters with different orders. Keywords: signal processing, spectral method, spectral form of mathematical description, Butterworth filter, Linkwitz–Riley filter, Chebyshev filter MSC: 42C10; 94A12 1. Introduction The paper concerns the problem of signal processing by linear filters. A linear filter is a linear dynamic system that passes components of the input signal with frequencies from a certain range (passband) and suppresses components of the input signal with frequencies that do not belong to such a range (stopband) [ 1 ] . These filters are designed to process analog signals, or signals in continuous time, and they are referred to as analog or electronic filters. They can be realized physically, e.g., as electronic circuits composed of resistors, inductors, and capacitors [ 1 , 2 ] . The paper’s primary focus is on low-pass filters, whose passband contains frequencies up to a predetermined frequency known as the cutoff frequency. High-pass filters are briefly discussed. This field began to actively develop about a hundred years ago. The theory of linear filters is inextricably linked with the research of Ronald Martin Foster [ 3 ] , Wilhelm Cauer [ 4 ] , Stephen Butterworth [ 5 ] , Hendrik Wade Bode [ 6 ] , Sidney Darlington [ 7 ] , and others. The early stages of this theory are thoroughly described in reviews [ 8 , 9 ] . Despite the subsequent development of filtering methods, the results obtained by Cauer and Butterworth (the Butterworth and Chebyshev filters) are still in use. For example, they are used to process signals describing human physiological parameters [ 10 , 11 ] , in particular in electrocardiography and phonocardiography [ 12 , 13 ] , in monitoring both heart rate and saturation [ 14 ] ; are required to preprocess data in the noise reduction subsystem for an unmanned aerial vehicle [ 15 ] and in a human activity recognition system [ 16 , 17 ] ; are used in electric motor or generator control systems [ 18 ] , for seismic wave analysis [ 19 ] and monitoring of structures in motion caused by seismic vibrations [ 20 ] ; and are applied to noise compensation in autonomous navigation systems [ 21 ] , as well as part of the identity authentication mechanism in information systems [ 22 ] . Based on the Butterworth filters, the Linkwitz–Riley filters were proposed [ 23 ] ; they are traditionally applied in audio signal processing [ 24 , 25 ] . As a rule, the transition to discrete time is used for computer modeling linear filters [ 15 , 26 , 27 , 28 ] . However, it is possible to propose a modeling technique that does not require time discretization (continuous 3time modeling is more natural for analog filters). This technique is based on the spectral form of mathematical description of linear systems [ 29 , 30 , 31 ] , which is oriented towards computer modeling from the moment of its appearance. The purpose of the paper is to describe and test the spectral method for modeling linear filters such as the Butterworth, Linkwitz–Riley, and Chebyshev filters. In this paper, the Linkwitz–Riley filters are considered to show how the spectral form is applied to describe a cascade of linear filters. The rest of the paper is structured as outlined below. In Section 2 , four forms of mathematical description for linear filters are presented, and the problem statement and goal of the study are formulated. In Section 3 , the spectral form of mathematical description is presented in more detail. This section contains the necessary formulae for computer modeling linear filters in continuous time. The Butterworth, Linkwitz–Riley, and Chebyshev filters (Type I and Type II) are considered in Section 4 . For each filter family, the transfer function and two-dimensional non-stationary transfer function are presented. Section 5 is devoted to the testing methodology, and it also presents the results of the computational experiment. The paper is summarized in Section 6 . Appendix contains an addition to the spectral form of mathematical description to take into account a phase delay. 2. Description of Linear Filters and Problem Statement Here, we consider linear filters that can be described in any of the ways listed below. They are called forms of mathematical description of linear systems, and they differ in the mathematical framework that is used to describe input and output signals, as well as linear systems themselves [ 29 ] . The time is assumed to be continuous and bounded: t\in\mathds{T}=[0,T] . In this section and below, we use standard notations and terms from complex analysis [ 32 ] . In particular, \mathds{C} represents the set of complex numbers (the complex plane); \mathrm{i} is the imaginary unit; \mathop{\mathrm{Re}}z and \mathop{\mathrm{Im}}z denote the real and imaginary parts of a number z\in\mathds{C} which give the Cartesian coordinates of a point in the complex plane; |z| and \arg z are its absolute value and argument which determine the polar coordinates of a point on the complex plane; \bar{z} is the complex conjugate of z . The sets \{z\colon\mathop{\mathrm{Re}}z<0\} and \{z\colon\mathop{\mathrm{Im}}z>0\} are the left and upper half-planes, respectively. In addition, some definitions and notations from the theory of function spaces are used, namely spaces of square-integrable functions {L_{2}(\mathds{T})} and {L_{2}(\mathds{T}^{2})} , as well as their bases [ 33 ] . The expressions that relate input and output signals of a linear system using four forms of mathematical description may be different. 1. Description by linear differential equations: a_{n}x^{(n)}(t)+\ldots+a_{1}x^{\prime}(t)+a_{0}x(t)=b_{m}g^{(m)}(t)+\ldots+b_{1}g^{\prime}(t)+b_{0}g(t), (1) where g(t) and x(t) are input and output signals, respectively, a_{0},a_{1},\dots,a_{n} and b_{0},b_{1},\dots,b_{m} are given values, n represents the filter order. The initial conditions are assumed to be zero. 2. Description by transition functions: x(t)=\int_{0}^{t}k(t,\tau)g(\tau)d\tau, (2) where k(t,\tau) is the impulse response function, i.e., the output signal of a linear system given the input signal as the Dirac delta function \delta(t-\tau) under zero initial conditions. The impulse response function can be found by the equation ( 1 ). Since coefficients of the left-hand and right-hand sides of the equation ( 1 ) are constant, the impulse response function can be considered as a function of one variable, namely k(\eta) for \eta=t-\tau . 3. Description by integral transforms: X(s)=H(s)G(s), (3) where G(s) , X(s) , and H(s) are defined by the Laplace transform ( \mathbb{L} ) of input and output signals, as well as the impulse response function as a function of one variable. In particular, H=\mathbb{L}[k],\ \ \ H(s)=\int_{0}^{+\infty}k(\eta)\mathrm{e}^{-s\eta}d\eta. The function of a complex variable H(s) is called the transfer function, it is expressed through coefficients a_{0},a_{1},\dots,a_{n} and b_{0},b_{1},\dots,b_{m} :

Read the complete text