Ferroelectric switching of interfacial dipoles in α \alpha -RuCl 3 /graphene heterostructure

Soyun Kim, Jo Hyun Yun, Takashi Taniguchi, Kenji Watanabe, Joseph Falson, Jun Sung Kim, Kyung-Hwan Jin, Gil Young Cho, Youngwook Kim · 2025

Read Ferroelectric switching of interfacial dipoles in α \alpha -RuCl 3 /graphene heterostructure by Soyun Kim, Jo Hyun Yun, Takashi Taniguchi, Kenji Watanabe, Joseph Falson, Jun Sung Kim, Kyung-Hwan Jin, Gil Young Cho, Youngwook Kim (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-07187.txt.

Introduction

Ferroelectric materials hold an electric polarization that can be flipped with a voltage and then stays put, which makes them attractive for memory devices. The authors report a new way to get this behavior in a layered stack of graphene, a thin boron nitride sheet, and a material called alpha-RuCl3. Charge moves across the thin middle layer on its own and creates electric dipoles at the boundary. These dipoles can be switched electrically. No sliding or twisting of the layers is needed, unlike in some other recent approaches.

Measurements showed clear switching loops that stand out near thirty kelvin. Strong magnetic fields, applied along or across the layers, barely changed the loops, which told the team the effect is electric rather than magnetic in origin. They present the stack as a robust route to tunable ferroelectric behavior in layered materials.

Catalog record

CREATORSoyun Kim, Jo Hyun Yun, Takashi Taniguchi, Kenji Watanabe, Joseph Falson, Jun Sung Kim, Kyung-Hwan Jin, Gil Young Cho, Youngwook Kim
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE36 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-07187

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ferroelectric switching of interfacial dipoles in α \alpha -RuCl 3 /graphene heterostructure Soyun Kim, Jo Hyun Yun, Takashi Taniguchi, Kenji Watanabe, Joseph Falson, Jun Sung Kim, Kyung-Hwan Jin, Gil Young Cho, Youngwook Kim Abstract We demonstrate electrically switchable, non-volatile dipoles in graphene/thin hBN/ α \alpha -RuCl 3 heterostructures, stabilized purely by interfacial charge transfer across an atomically thin dielectric barrier. This mechanism requires no sliding or twisting to explicitly break inversion symmetry and produces robust ferroelectric-like hysteresis loops that emerge prominently near 30 K. Systematic measurements under strong in-plane and out-of-plane magnetic fields reveal negligible effects on the hysteresis characteristics, confirming that the primary mechanism driving the dipole switching is electrostatic. Our findings establish a distinct and robust route to electrically tunable ferroelectric phenomena in van der Waals heterostructures, opening opportunities to explore the interplay between interfacial charge transfer and temperature-tuned barrier crossing of dipole states at the atomic scale. Figure 1: (a) Optical image and schematic of a device (D1) without a top gate, used for measurements in panel (c). (b) Optical image and schematic of the same device but with a top gate, used for measurements in panels (d) and (e). Scale bars at panel (a) and (b) for device images are 10 \mu m.(c) Four-terminal longitudinal resistance, R , measured before top gate fabrication, shown as a function of back gate voltage V_{\mathrm{BG}} at B=0 T, for temperatures ranging from 1.5 K to 50 K. Solid lines indicate forward sweeps, dashed lines backward sweeps. (d) After top gate fabrication, four-terminal resistance measured as a function of top gate voltage V_{\mathrm{TG}} at V_{\mathrm{BG}}=0 V. (e) Resistance as a function of back gate voltage V_{\mathrm{BG}} measured at a fixed top gate voltage V_{\mathrm{TG}}=0 V in the same device after top gate fabrication. Grey lines show additional measurements performed after five-month storage under floating top gate conditions. The color coding for temperature is consistent across panels (c)–(e). I Introduction Two-dimensional ferroelectricity, the ability to switch electric polarization in crystals only atoms thick, has emerged as a rapidly growing field Dawber et al. 2005 ; Bune et al. 1998 ; Fong et al. 2004 ; Wang et al. 2023 ; Zhou et al. 2022 ; Wu 2021 . Unlike classical ferroelectrics that rely on collective ionic displacements, polar order in van der Waals systems can arise through less conventional mechanisms, highlighting how the two-dimensional limit, with its strong fluctuations and pronounced interface effects, offers a fundamentally new setting to explore polarization phenomena Wu and Jena 2018 ; Xiao et al. 2018 ; Ding et al. 2017 ; Yuan et al. 2019 ; Higashitarumizu et al. 2020 ; Chang et al. 2016 ; Gou et al. 2023 ; Chang et al. 2020 ; Liu et al. 2016 ; Ghosh et al. 2019 . One prominent example is sliding ferroelectricity, where stacking two layers in a non-centrosymmetric arrangement creates an out-of-plane dipole that reverses when the layers are laterally shifted Fei et al. 2018 ; Vizner Stern et al. 2021 ; Meng et al. 2022 ; Wang et al. 2023 ; Niu et al. 2022 ; Ji et al. 2023 ; Yang et al. 2023 ; Zhang et al. 2023 . Recently, the stacking-induced interface polarization observed in hexagonal boron nitride (hBN) layers illustrates how subtle interlayer misalignments in van der Waals heterostructures can give rise to stable ferroelectric states even without inherent polarity in materials Yasuda et al. 2021 ; Woods et al. 2021 ; Li and Wu 2017 . Combining different two-dimensional materials can lead to interfacial charge transfer that establishes static out-of-plane dipole layers purely through electronic redistribution, without requiring lattice distortions or engineered symmetry breaking Chen et al. 2025 ; Zheng et al. 2020 ; Rogée et al. 2022 . Although such interfacial dipoles have been observed in static measurements, realizing an electrically tunable, switchable dipole response remains largely unaddressed. Rossi et al. 2023 ; Rizzo et al. 2020 ; Rizzo et al. 2023 In this context, clarifying the precise interplay between interlayer electronic coupling and polar order formation becomes crucial for advancing electrically controlled polarization phenomena at atomic scales. Graphene paired with \alpha -RuCl 3 , a layered Mott insulator and candidate Kitaev quantum magnet Plumb et al. 2014 ; Banerjee et al. 2016 ; Banerjee et al. 2017 ; Yokoi et al. 2021 ; Sears et al. 2015 , provides an appealing platform to explore this challenge. Recent studies of graphene/ \alpha -RuCl 3 heterostructures have shown interfacial charge transfer that produces local interfacial polarization at the boundary Mashhadi et al. 2019 ; Zhou et al. 2019 ; Rizzo et al. 2020 ; Balgley et al. 2022 ; Rizzo et al. 2022 ; Rossi et al. 2023 ; Kim et al. 2023 . In the direct-contact limit, however, the large work-function difference drives nearly complete charge transfer, producing a high local carrier density that strongly screens internal electric fields. This pins any interfacial polarization to atomic length scales, preventing a collective response to external gate voltages and thus does not yield stable, switchable dipolar order. Developing heterostructures that moderate the transfer while preserving strong electrostatic coupling, for example by introducing an ultrathin dielectric spacer, remains an important open problem. To this end, we introduced an ultrathin insulating hBN spacer between graphene and \alpha -RuCl 3 . This few-layer hBN spacer significantly reduces interfacial charge transfer, thereby preventing complete screening, but still permits partial electron redistribution across the interface, stabilizing dipoles that are responsive to gate voltages Wang et al. 2020 . These dipoles manifest as clear ferroelectric-like hysteresis in transport measurements, appearing around 30 K and becoming progressively more stable upon cooling and repeated gating. Drawing on our systematic measurements across temperature, thickness of hBN spacer, and external magnetic fields, we also propose a possible mechanism underlying the observed switchable ferroelectricity. II Gate-induced interfacial dipole switching and long-term stability To explore this behavior and its dependence on barrier thickness, we fabricated six devices with different interlayer configurations, ranging from a direct graphene/ \alpha -RuCl 3 interface (no hBN, D0) to heterostructures incorporating bilayer (D1, D2), trilayer (D3), seven-layer (D4), and ten-layer hBN spacers (D5). The results presented in Fig. 1 focus on the device with a bilayer hBN spacer (D1), which serves as a representative case to highlight the essential physics. We performed gate sweep measurements in two stages, before and after top gate fabrication, as shown in Fig. 1 (a) and 1 (b). Figure 1 (c) presents the longitudinal resistance as a function of back gate voltage V_{\mathrm{BG}} , measured before top gate deposition over temperatures ranging from 1.5 K to 50 K. Solid and dashed lines correspond to forward and backward sweeps, respectively. A hysteresis is observed at T=30 K, whereas it is negligible or weak at other temperatures. After the top gate was fabricated, the gate-dependent behavior revealed several intriguing features. First, as shown in Fig. 1 (d), sweeping the top gate voltage V_{\mathrm{TG}} at V_{\mathrm{BG}}=0 V results in relatively modest changes in resistance at 50 K, indicating that the top gate does not strongly modulate the carrier density in the usual way. Second, the hysteresis induced by top gate sweeps, displayed in Fig. 1 (d), shows a markedly different trend compared to the

Read the complete text