Engineering snags for spatial curvature in weaves: Fabrication, mechanics, and inverse design

Guowei Wayne Tu, Evgueni T. Filipov · 2025

Read Engineering snags for spatial curvature in weaves: Fabrication, mechanics, and inverse design by Guowei Wayne Tu, Evgueni T. Filipov (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-06673.txt.

Introduction

Guowei Wayne Tu and Evgueni Filipov wrote an engineering paper in two thousand twenty-five on making woven sheets curve on purpose. Weaving is an old craft now used in smart textiles and soft robots. Weaving a surface with complex curves has been hard, usually needing curved ribbons or three-way patterns.

Their trick is the snag, a pulled loop normally seen as a defect. By pulling ribbons out of plain weaves at chosen spots, they seed local snags whose strain spreads into global curvature. A simple bar-and-hinge model simulates the shaping, and they show how curvature scales with ribbon thickness and stiffness. An inverse design tool completes the method.

Catalog record

CREATORGuowei Wayne Tu, Evgueni T. Filipov
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-06673

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Engineering snags for spatial curvature in weaves: Fabrication, mechanics, and inverse design Guowei Wayne Tu, Evgueni T. Filipov Abstract Weaving as an old craft has extensive applications in modern science and technology such as smart textiles and intelligent soft robots. However, weaving irregular curved surfaces has been difficult, with prior alternatives requiring curved ribbons and triaxial weaving patterns. In this work, we present a simple strategy to achieve complex spatial curvature by purposely introducing ‘snags’, a traditionally unwanted textile defect, into dense plain weaves consisting of straight ribbons assembled in a straightforward biaxial network. We detail the fabrication methodology where we pull out ribbons of initially smooth two- (2D) and three-dimensional (3D) plain weaves to form local snags. We show that these local defects cause global curvatures through the propagation of geometric frustration. We then use a reduced-order bar & hinge model to simulate the mechanics-guided deformation of snagged plain weaves, and we investigate how the curvature scales with system parameters such as the thickness and Young’s modulus of the ribbons. Finally, we introduce an inverse design platform where an evolutionary algorithm is used to inversely compute the optimal snag patterns of smooth plain weaves to approximate arbitrary target surfaces including 2D and 3D woven exoskeletons that fit human legs and elbows, respectively. Engineering snags in plain weaves as a general strategy can pave the way for future design of customizable wearable devices, adaptive soft robots, reconfigurable architecture, and more. 1 Introduction As an efficient strategy to assemble one-dimensional (1D) materials into two- (2D) and three-dimensional (3D) structural systems, weaving techniques are being explored in modern science and engineering to make artificial muscles [ 1 , 2 , 3 ] , impact-resistant armor [ 4 , 5 , 6 ] , architected metamaterials [ 7 , 8 ] , and more. When fabricating these woven systems, there are various weaving patterns that can be used to arrange the 1D materials into more complex geometries. Among all weaving patterns, the plain weave pattern is the most straightforward where straight ribbons/fibers are arranged in an one-over-one-under manner [ 9 , 10 , 11 , 12 ] . The simplicity of plain weaves makes them highly compatible with automated weaving machines [ 13 , 14 ] , adaptable to different materials [ 15 , 16 , 17 ] , and to different length scales [ 18 , 19 , 20 , 21 ] . However, plain weaves lack a capability of forming complex spatial curvatures, which are necessary for many engineering applications [ 22 , 23 , 24 ] . To approximate intricate 3D curved surfaces, one common strategy is sparse triaxial weaving with originally curved ribbons [ 25 , 26 , 27 ] . Weaving non-uniform curved ribbons in a tri-axial manner is time-consuming, non-intuitional, and less adaptive to different materials compared to plain weaves [ 28 , 29 , 30 ] . Besides, the sparsity of tri-axially woven surfaces undermines the structural strength and water/ballistic resistance of the system [ 31 , 32 ] . Another common strategy to construct 3D curvatures is mold forming/draping of planar woven sheets [ 33 , 34 , 35 , 36 ] . These mold forming processes cause irreversible plastic damage to the fibers and weaken the mechanical performance of the woven systems. In this work, we introduce a weaving technique where we intentionally introduce simple snags into dense plain weaves to achieve complex spatial curvature. As a traditionally unwanted defect in woven fabrics where a ribbon/fiber is accidentally pulled out of place and misaligned from its intended interlacing path, snags distort the surface and can cause unexpected deformation and curvature [ 37 , 38 , 39 ] . Here, we systematically engineer these localized disruptions to alter the geometry of 2D and 3D plain-woven surfaces and structures in a predictable and programmable manner. Some examples are shown in Figs. 1 and 2 . We first discuss the fabrication of snagged plain weaves where we follow a pre-designed snag pattern and introduce those snags into an originally 2D or 3D plain weave in a simple and systematic way (Section 2 ). We also explain how these local geometric frustrations cause a global curvature. Then, we provide a mechanics-based reduced-order bar & hinge model to simulate the geometry of snagged plain weaves (Section 3 ). Using this mechanics model, we numerically and experimentally investigate how spatial curvatures of snagged plain weaves scale with essential design parameters including the size of the surface, the thickness of the ribbons, and the Young’s modulus of the material (Section 4 ). After gaining insights into the coupling between the mechanics and geometry, we establish an inverse design framework where we can find an optimal snag pattern once a target surface is given (Section 5 ). We give real-life examples where 2D and 3D snagged plain-woven surfaces can fit onto a human leg and elbow, which is a potential solution to customized woven exoskeleton suits [ 40 ] . As a general simple strategy to program the curvature of densely plain-woven systems, engineering snags can make a paradigm shift in the future design of next-generation wearable electronics, intelligent soft robots, flexible metamaterials, and more. Figure 1: Engineering snags in plain weaves to achieve spatial curvature . (a) Fabrication of a snag in a densely plain-woven flat sheet; (b) How a local snag causes curvature through the propagation of action-reaction force pairs; ‘B.C.’ stands for ‘boundary condition’; (c) Variations of the size, shape, and direction of the snag in (a) and the resulting geometries; (c, i ) shows a larger yet still square snag, (c, ii ) shows a rectangular strip-like snag, and (c, iii ) shows a diagonal strip-like snag; (d) Combinations of the three types of snags in (c) and the resulting geometries; (d, i ) shows a combination of two rectangular snags, which results in a skate fish-like shape; (d, ii ) shows a combination of four diagonal snags, which results in an oblique cylindrical shape; (d, iii ) shows a random combination of square, rectangular, and diagonal snags, which results in a random complex shape. In each case in (c) and (d), the left shows the 2D snag patterns, the middle shows the physical prototypes, and the right shows the simulated shapes where the colormap represents the normalized deviation between the simulated and scanned geometries \delta/\overline{L} where \delta is the deviation (Hausdorff distances at each node) and \overline{L} is the average length of all ribbons used. 2 Engineering snags in plain weaves In this section, we detail how we fabricate snags in 2D plain weaves, how local snags enable global curvatures, and how we generalize the snagging strategy to complex 3D plain weaves. 2.1 Snags in 2D plain-woven sheets Figure 1 (a) shows how we start the fabrication with a 2D square densely plain-woven sheet where the dimension is 9 \times 9 \mathrm{unit}^{2} and all constituent ribbons are secured at the boundary by split pins. All physical models shown here are made from Mylar ® polyester that is 7.5 mil (0.1905 mm) thick, and the width of the ribbons is 10 mm. The plain weave is densely packed, while a small gap d=0.5\ \mathrm{mm} is included between the

Read the complete text