Single photon emission from lithographically-positioned engineered nanodiamonds for cryogenic applications Journal: ol

Vivekanand Tiwari, Zhaojin Liu, Hao-Cheng Weng, Krishna C Balram, John G Rarity, Soumen Mandal, Oliver A Williams, Gavin W Morley, Joe A Smith · 2025

Read Single photon emission from lithographically-positioned engineered nanodiamonds for cryogenic applications Journal: ol by Vivekanand Tiwari, Zhaojin Liu, Hao-Cheng Weng, Krishna C Balram, John G Rarity, Soumen Mandal, Oliver A Williams, Gavin W Morley, Joe A Smith (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-06424.txt.

Introduction

Vivekanand Tiwari and eight co-authors place tiny diamonds with care to build better quantum light sources, in a 2025 paper. Flaws inside diamonds can emit one photon at a time, a trick quantum networks need. Getting useful light out of such a small flaw is hard, though, and cold test rigs narrow the view further. The team set milled, purified mini diamonds onto metal mirrors using light-based patterning.

A glass layer over a silver mirror formed the base of the device. The stack gathered far more of the emitted light than a bare chip would. At very low temperatures the team could still read each flaw's spectrum and check the one-photon claim with a standard timing test. Comparing stack designs points the way to making such sources on whole wafers, a step toward quantum gear built at scale.

Catalog record

CREATORVivekanand Tiwari, Zhaojin Liu, Hao-Cheng Weng, Krishna C Balram, John G Rarity, Soumen Mandal, Oliver A Williams, Gavin W Morley, Joe A Smith
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-06424

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Single photon emission from lithographically-positioned engineered nanodiamonds for cryogenic applications Journal: ol Vivekanand Tiwari, Zhaojin Liu, Hao-Cheng Weng, Krishna C Balram, John G Rarity, Soumen Mandal, Oliver A Williams, Gavin W Morley, Joe A Smith Abstract Nitrogen-vacancy centres in nanodiamonds (NDs) provide a promising resource for quantum photonic systems. However, developing a technology beyond proof-of-principle physics requires optimally engineering its component parts. In this work, we present a hybrid materials platform by photolithographically positioning ball-milled isotopically-enriched NDs on broadband metal reflectors. The structure enhances the photonic collection efficiency, enabling cryogenic characterisation despite the limited numerical aperture imposed by our cryostat. Our device, with SiO 2 above a silver reflector, allows us to perform spectroscopic characterisation at 16 K and measure autocorrelation functions confirming single-photon emission (g 2 (0)<0.5). Through comparative studies of similar hybrid device configurations, we can move towards optimally engineered techniques for building and analysing quantum emitters in wafer-scale photonic environments. For quantum information processing applications, the nitrogen-vacancy (NV) centre defect in nanoscale-inclusions of diamond, termed nanodiamond (or ND), offers a lithographic means to combine spin-photon interfaces with both foundry photonics and microelectronics at scale [ 1 , 2 ] . Here, ND lithographic deposition overcomes a significant limitation: localisation of a stochastically formed atom-like emitter. However, a key barrier to adoption of ND-based spin-photon interfaces is the proximity of the diamond surfaces to the atom-like system, which typically introduces unwanted charge noise and strain. Significantly, especially for the NV centre, this was enough to consider the platform not suitable for quantum information applications [ 3 ] . Recently, results have begun to challenge this assumption, with high optical and spin coherence reproducibly reported in ND that has been engineered specifically for quantum purposes [ 4 , 5 ] . This is a significant technology development compared to earlier results which used ND powders synthesised primarily as a mechanical lubricant [ 6 , 7 ] . The prospect of combining ND with a chip-scale platform lends itself to then adopting semiconductor techniques such as encapsulation [ 7 ] and surface engineering [ 8 ] , which may in turn lead to the development of a technologically-mature platform for quantum information processing, especially compared to bulk diamond, which is costly, limited in substrate size, and difficult to integrate both photonic structures and active electronics. For photonics, significant efforts have been made to address the limitations caused by isotropic angular emission patterns and low emission rates in high-index semiconductor-hosted quantum emitters by modifying their surrounding photonic environment [ 9 , 10 ] . For example, the use of a circular Bragg resonator for a solid-state source of strongly entangled photon pairs with high brightness and indistinguishability [ 11 ] , plasmonic bullseye antennas [ 12 , 13 ] and deterministic enhancement of coherent photon generation using distributed Bragg reflectors [ 14 ] . In general hybrid, or hetereogeneous, material platforms lend themselves well to creating quantum photonic interfaces as the photonic material can be selected for its quality and then independently combined with an optimised quantum component in a post-fabrication step [ 15 , 1 ] . One simple photonic device is the use of a metallic reflector [ 16 ] . The reflector is inherently broadband, so requires no tuning between the emission wavelength of the quantum emitter and the photonic device used to enhance light extraction compared to resonant structures [ 17 ] . In this letter, we present a new photolithographic method to pattern arrays of engineered ballmilled ND [ 5 ] , using a direct laser writer and combine them with an engineered photonic device. As a proof of concept, we illustrate the use of a broadband metallic reflector. As opposed to positioning techniques that rely on electron beam lithography [ 18 ] , the photolithographic process presented in this manuscript provides a route to rapid, low-cost wafer-scale deposition of localised emitters, useful to rapidly characterise the compatibility of engineered quantum emitters with a range of different engineered photonics platforms. Typically, ND characterisation at room temperature is carried out in a confocal microscope with a large numerical aperture (NA =0.95). Limited by the physical constraints of our cryostat, we require a large working distance from the sample plane, that then limits the available numerical aperture (NA = 0.7) of the objective lens (working distance 6.0 mm MY100X-806 Mitutoyo). We found that the reduced NA resulted in low count rates (2 kc/s per channel), precluding autocorrelation measurement of ND on standard substrates (Si/SiO 2 ) and similar characterisation. Faced by this obstacle, we were motivated to design a metal reflector positioned beneath the ND, drawing on our previous work in encapsulated metallic photonics for visible photonics [ 19 ] . The device increases the broadband collection efficiency of emitters under study, and we show this enables cryogenic autocorrelation measurement. The device also serves as a simple test bed towards the more complex multi-material structures enabled by our photolithographic ND positioning technique. For the device to achieve constructive interference between the light emitted by the NV centre in the top direction and the reflected light by the metal mirror, the thickness of SiO 2 needs to be precisely engineered. The calculation is performed using Finite-Difference Time-Domain (FDTD) method in Lumerical where we use an electric dipole with the emission wavelength 637 nm to simulate the single-photon source, at the zero phonon line (ZPL) of the NV - centre [ 20 ] . In Figs. 1 (a) and (b), the power flow without and with a metal reflector are illustrated, wherein a layer of silver (Ag) has been inserted into the material stack. Notably, without the metal reflector (Fig. 1 (a)) a significant fraction of the power is lost in the downwards direction not accessible by the confocal microscope. Following on from this, in Fig. 1 (c), we plot the collected power from a representative NV - dipole as a function of the buffer SiO 2 thickness for a range of metallic materials. The maximum power collection occurs around 65 nm of SiO 2 , and a second order peak for all metals at around 265 nm at the point of constructive interference, recording a maximum of three times enhancement compared to the absence of a metallic reflector. Fig. 1 (c) shows superior reflectance using silver (Ag) to the other metals such as gold (Au) or aluminium (Al) [ 21 ] . Also, Ag metal reflectors are generally superior to Au for visible-light applications [ 22 ] . Ag exhibits a stronger electric field intensity and less light absorption as a result of its smaller imaginary dielectric component. This leads to significantly greater photoluminescence (PL) enhancement (e.g. 4.0-fold compared to Au’s 1.8-fold) [ 23 ] . Experimentally, we have observed that Au metal reflectors can increase background noise, specifically originating from the interface between the Au film and the SiO 2 spacer [ 24 ] . In addition, Ag is both more reflective and more stable than Al. With the optimal thickness chosen, it will be useful to calculate the far-field distribution to find the fraction accepted within the NA = 0.7 objective (45 ∘ half-angle). Fig. 1 (d) shows the total power detected in the top plane. We

Read the complete text