Aspheric Lens Design Proposal for near-perfect mode-matching of a Broadband Quantum Dot Micropillar to a Single-Mode Fibre Journal: opticajournal Publication type: Research Article

Yichen Zhang, 1,3 David Dlaka, 1,* James McDougall, 1,2 James Y Tai, 1 Petros Androvitsaneas, 1 Edmund Harbord, 1 Ruth Oulton, 1 and Andrew B. Young 1 · 2025

Read Aspheric Lens Design Proposal for near-perfect mode-matching of a Broadband Quantum Dot Micropillar to a Single-Mode Fibre Journal: opticajournal Publication type: Research Article by Yichen Zhang, 1,3 David Dlaka, 1,* James McDougall, 1,2 James Y Tai, 1 Petros Androvitsaneas, 1 Edmund Harbord, 1 Ruth Oulton, 1 and Andrew B. Young 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-06223.txt.

Introduction

Yichen Zhang and co-authors design a lens to pour light from a quantum dot pillar into a fibre. Their 2025 paper tackles a weak link in single-photon sources. The pillar emits into a wide cone, so most photons miss the narrow fibre core.

A shaped silica microlens placed on the pillar bends the output toward the fibre mode. Losses from poor matching fall from over 80 percent to under a tenth of a percent in the design. End-to-end efficiency reaches about 96 percent. The authors say the fix removes a main block to scaling photonic quantum hardware. The design is offered as a proposal backed by simulation of the full source and fibre system together.

Catalog record

CREATORYichen Zhang, 1,3 David Dlaka, 1,* James McDougall, 1,2 James Y Tai, 1 Petros Androvitsaneas, 1 Edmund Harbord, 1 Ruth Oulton, 1 and Andrew B. Young 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-06223

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Aspheric Lens Design Proposal for near-perfect mode-matching of a Broadband Quantum Dot Micropillar to a Single-Mode Fibre Journal: opticajournal Publication type: Research Article Yichen Zhang, 1,3 David Dlaka, 1,* James McDougall, 1,2 James Y Tai, 1 Petros Androvitsaneas, 1 Edmund Harbord, 1 Ruth Oulton, 1 and Andrew B. Young 1 Abstract Quantum dots in micropillars are one of the most promising options for a bright, deterministic single photon source. While highly efficient devices (¿95%) have been designed, there remains a significant bottleneck that impacts the overall system efficiency: the large numerical aperture of the output mode. This leads to inefficient coupling of emitted photons into single-mode fibre, thus limiting practical integration into quantum computing and communication architectures. We show that with the addition of a well designed aspheric SiO 2 \mathrm{SiO_{2}} microlens we can decrease the mode-matching losses to a SMF from 83.1% to ¡0.1(0.1)%. This can result in a single photon source design with 96.4(0.1)% end-to-end efficiency, paving the way for scalable photonic quantum technologies. 1 Introduction and Methodology The development of an on-demand single photon source (SPS) with near-ideal efficiency and indistinguishability could accelerate a number of photonics-based quantum technologies [ 1 , 2 ] , such as the ability to reliably generate large linear cluster states [ 3 ] for applications in quantum computing [ 4 ] , as all-optical memory-less repeaters [ 5 ] , as a source in secure quantum communications and cryptography [ 6 , 7 , 8 ] , generating high-N00N states, as well as other applications in quantum metrology [ 9 , 10 , 11 ] . Among the various sources of quantum light, epitaxial quantum dots in micropillars [ 12 , 13 , 14 ] have been a particularly strong contender due to the high demonstrated efficiencies at the first lens (internal efficiency \xi ) [ 15 , 16 , 17 , 18 ] , and deterministic light-matter interactions [ 19 , 20 ] . However, due to the fact that the emission from the micropillars is over a large solid angle, efficiently mode-matching to a single mode fibre (SMF) requires additional engineering. Some examples include embedding the quantum dot in a Solid Immersion Lens (SIL) structure [ 21 , 22 , 23 ] , or mode-matching with various hemispherical lens or circular Bragg grating (CBG) structures on either the sample or on the collection fibre [ 24 , 25 , 26 ] . These approaches are able to shape the output mode and reduce losses due to mode mismatch to ¡20-10%, but negatively affect the internal efficiency \xi . In order to push the end-to-end efficiency further, open cavity designs have been demonstrated [ 27 ] , with the current state of the art achieving 71% into SMF with 97.95% single-photon purity [ 28 ] . In this work, we address the issue of near-lossless fibre coupling of ultra-efficient SPSs by taking previously optimised micropillar cavity designs with internal efficiency \xi=96\% [ 29 ] and integrating an aspheric SiO 2 microlens on top; by controlling the lens profile, the mode field diameter and numerical aperture (NA) of the pillar emission can be shaped. Using finite-difference time-domain (FDTD) simulations, we demonstrate a lens resulting in a near-unity ( >99\% ) overlap between the emitted mode of the micropillar and an industry standard single-mode fibre, whilst maintaining the internal efficiency of our original micropillar design. We use a commercial FDTD solver to simulate telecom O-band GaAs/AlAs micropillars under the same simulation conditions stated in [ 29 ] , where the glass material used for the additional lenses in this work is n_{\mathrm{SiO}_{2}}=1.45 . The emission from the top of the micropillars undergoes a fast Fourier transform which allows for resolution of emitted modes in momentum space. The emission profile of the micropillar-lens systems, which is illustrated in Figure 1 (a), is described by the pillar Mode Field Diameter (MFD), labelled w_{\mathrm{p}} , and the Numerical Aperture (NA) of the emission as defined by the 1/e^{2} criterion, labelled \mathrm{NA_{p}} . These values, as determined from a 2D planar monitor placed above the pillar or lens, are compared to the well-defined Gaussian of an industry standard single-mode fibre (SMF-28) with MFD w_{\mathrm{f}}\approx 9.2\,\upmu m and \mathrm{NA_{f}}=0.14 at \lambda\approx 1.3\,\upmu m. To minimise the efficiency losses due to mode-matching, we initially use the near field MFD w_{\mathrm{MFD}} to inform whether any telescopic magnification is required, which would affect the optimal NA of the emission. This interdependence of w and \mathrm{NA} follows w_{\mathrm{f}}\approx\frac{2\lambda}{\pi\mathrm{NA_{f}}} (1) for small NA (see equation 4.3 in [ 30 ] ). In this work we match the MFDs of the micropillar-lens device and a SMF, thereby avoiding the need for telescopic magnification. Therefore, following the method in [ 31 ] , the comparison of the NA in the far-field (momentum) from the device and a SMF can be used to calculate a coupling (mode-matching) efficiency \eta_{\mathrm{SMF}} as \eta_{\mathrm{SMF}}=\frac{4\mathrm{NA^{2}_{p}}\mathrm{NA^{2}_{f}}}{\left(\mathrm{NA^{2}_{p}}+\mathrm{NA^{2}_{f}}\right)^{2}} (2) where \mathrm{NA}_{f} , \mathrm{NA}_{p} are the far-field numerical apertures of the fibre and pillar beams (per the 1/e^{2} criterion). Figure 1: (a) The emission of a micropillar with a microlens on the top face. The mode field diameter w_{\mathrm{p}} and numerical aperture \mathrm{NA_{p}} are the key parameters in determining the coupling efficiency of the emission into SMF; (b) The cross-section of various aspheric lenses shows the hemispherical \mathrm{k}=\mathrm{k_{4}}=0 case in grey become increasingly hyperbolic ( \to red) as \mathrm{k}\to-\infty or increasingly quadric ( \to blue) as \mathrm{k_{4}}\to\infty . A glass microlens with an aspheric profile can be used to change the pillar MFD and NA. The aspheric lens profile follows the equation z(x)=\frac{x^{2}/\mathrm{R}}{1+\sqrt{1-(1+\mathrm{k})\frac{\mathrm{x}^{2}}{\mathrm{R^{2}}}}}+\mathrm{k_{4}}\,x^{4} (3) where \mathrm{R} is the lens radius at the base, \mathrm{k} is the conic coefficient, and \mathrm{k_{4}} is the quadric coefficient; higher order coefficients have been omitted to keep the optimisation space to only these three dimensions. Some example profiles for \mathrm{R}=1\ \upmu m have been shown in Figure 1 (b). The \mathrm{k,k_{4}}=0 case results in a hemisphere (grey) which becomes more hyperbolic (red) with the conic coefficient \mathrm{k} , while the \mathrm{k_{4}}x^{4} contribution leads to more bullet-shaped (blue) lens profiles. N.B. The axes are shown in terms of the lens height and width, but the coordinate system origin per Eq. 3 is centred at the top of each lens. 2 Design Proof Of Concept The demand for additional mode matching tools, such as the aspheric lens technique proposed in this work, becomes evident when considering the emission profile from simple micropillars. A simple design strategy [ 29 ] , where the micropillar diameter can be carefully selected to Purcell suppress leaky decay, can be used to find families of high-efficiency high-bandwidth devices at small diameters ( <2-3\,\upmu m). However, these devices have a small mode field diameter (MFD) \mathrm{w_{p}}\sim 1.5-2.5\,\upmu m and a large angular divergence with NA \sim 0.5-0.8 . To mode-match this emission to the profile of a standard O band SMF-28, which has a MFD \mathrm{w_{f}}\approx 9.2\,\upmu m and NA {}_{\mathrm{P}}\approx 0.14 , is extremely challenging and involves magnification using multiple, possibly custom, bulk optical lenses. These will introduce excess losses and the setup would need to be changed for each micropillar design. Alternatively, an additional integrated mode-matching element on each device can shape the output

Read the complete text