A flexible test facility for liquid xenon detector development
and Shuoxing Wu · 2025
Read A flexible test facility for liquid xenon detector development by and Shuoxing Wu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-05853.txt.
Introduction
Angelico and co-authors describe a flexible test facility for developing liquid xenon detectors, the kind used to hunt rare particle events. As these detectors grow, so do the engineering hurdles. Their 2025 paper details a large shared facility that supports work on sensors, purification, materials, and high voltage behavior.
Cooling comes from immersing the test chamber in a liquid bath, run by an automated, remotely watched system. That design steadies temperature and pressure and buys response time if cooling power fails. The authors lay out design choices, daily procedures, and measured performance. Five example test chambers built on the facility show the range of studies it can host.
Catalog record
| CREATOR | and Shuoxing Wu |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-05853
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A flexible test facility for liquid xenon detector development and Shuoxing Wu Abstract As liquid xenon time projection chambers scale to ever-larger sizes, so too do the engineering challenges they pose. We describe a large, flexible, multipurpose test facility capable of supporting the development of a number of key aspects of liquid xenon detector systems. Example applications of this facility include characterization of large-area light and charge sensor arrays, tests of xenon purification techniques and materials compatibility, and investigations into high-voltage phenomena. This facility uses an automated and remotely monitored cryo-cooling system based on immersion of the test chamber in a liquid bath rather than conductive coupling, leading to advantages in temperature and pressure stability, as well as increasing required response times in the case of cooling-power loss. Design advantages, operational procedures, and performance of the facility are described, as well as five examples of liquid xenon test chambers that use the facility. 1 Introduction Liquid xenon (LXe) time projection chambers (TPCs) have been established as an essential technology for nuclear and particle physics due to their low intrinsic radioactivity, scalability, and the co-production of scintillation and ionization signals which results in excellent energy resolution and particle identification. Tonne-scale LXe TPCs are currently being used to search for interactions from hypothesized dark matter candidates [ 1 , 2 , 3 ] , while planning is underway for a tonne-scale search for neutrinoless double-beta decay ( 0\nu\beta\beta ) [ 4 ] . Beyond the near term, even larger detectors [ 5 , 6 , 7 ] are being studied to push dark matter searches into the “neutrino fog” [ 8 ] and extend their sensitivity to 0\nu\beta\beta . Continued improvement to LXe TPC technology demands further development of charge and light sensing schemes, as well as amplification and digitization electronics integrated with those sensors, that are adequately scalable and amenable for ultra-low-background operation. Medium-scale test facilities play a critical role in bridging the gap between the single-sensor R&D scale and full-scale experiments, as simultaneous readout of arrays of sensors poses challenges that may not be apparent in single-sensor R&D tests. In addition to sensor development, operation of large-scale LXe TPCs requires an improved understanding of high-voltage phenomena in LXe as well as the chemical compatibility of detector materials with LXe, which can compromise charge signal resolution. In this paper, we describe a test facility optimized for stable, long-term operation, with the flexibility to accommodate a variety of different test chambers with LXe masses of up to \sim 100~\mathrm{kg} . Facilities of this kind are well suited to the vast range of R&D efforts essential to developing large-scale LXe experiments. Similar university and research lab scale facilities exist, including the one described in [ 9 ] . The Stanford facility has several distinguishing features, illustrated below. 2 Overview The Stanford LXe TPC test facility, shown in Fig. 1 , includes two independent test stands, each with the infrastructure necessary to operate a variety of different LXe test chambers. The “Large System” is so named because it uses a cryostat with a 50 cm inner diameter, while the “Small System” uses a cryostat with a 40 cm inner diameter. The Small System and Large System can host test chambers with flange diameters of up to 30.5 cm (DN250CF) and 41.9 cm (DN350CF), respectively. For each system, a flange mounted at the top of a Unistrut support frame acts as the feedthrough interface between the air side and cold space of the cryostat, sealing to a vacuum-insulated dewar using an o-ring. LXe test chambers are suspended from the underside of the top flange using low-thermal-conductivity rods, such as 1/4” SS316 all-threads or thin-wall SS316 tubing welded to fixture plates. Dewars are raised to mate with the top flange using a rope-and-pulley system. Each Unistrut frame includes a diamond-tread platform, providing access to the top flange, DAQ rack, and xenon handling manifold. Both manifolds are connected to the same xenon storage bottle, with valves to direct xenon into and out of either system. Figure 1 : Left: photo of the lab showing the two LXe test stands, the xenon storage cylinder, and the Novec 7000 supply. Right: the cryo chiller outside the lab. 3 Cryogenics Unlike similar facilities, which typically use a cold finger conductively coupled to a test chamber in a vacuum space, the systems described here achieve cooling by immersing the test chambers into a temperature-controlled bath of cooling fluid. This alternative technique possesses a number of advantages, particularly with larger-scale detectors. The large thermal mass of the cooling fluid, which far exceeds the thermal mass of LXe in the test chambers, results in excellent temperature stability; if cooling is lost due to a failure of the cryostat, the temperature of the LXe rises slowly and in sync with the temperature of the cooling fluid. For experiments using greater than 10 kg LXe masses, which can take multiple days to fill, this level of thermal stability is greatly appreciated by the operators that monitor for failures. Furthermore, in the liquid-submerged cryostat, no mechanical thermally-conductive contact is required between the chamber and cooling element. Convective cooling between the liquid, cooling element, and submerged chamber removes the need for a copper LXe chamber or copper braids to achieve thermal uniformity. A chamber of any geometry can be cooled in this fashion, provided it fits inside the cryostat. This allows the LXe chambers to be constructed using off-the-shelf ultra-high-vacuum hardware such as ConFlat (CF), adding convenience and reducing cost. 3.1 System Design 4 Xenon Filling & Handling Figure 2 : Piping & instrumentation diagram for the Large System. Red lines represent high-pressure tubing while blue lines represent tubing maintained at vacuum. The Small System shares the xenon supply and the cryo chiller; otherwise the diagram for the Small System is the same. A diagram illustrating one of the xenon systems in its entirety, including xenon manifold, cryostat, and instrumentation, is shown in Fig. 2 . In addition to illustrating the context of the cryostat design and operation, this diagram will also be referred to in later subsections related to experimental capabilities like radioactive source deployment and purification. Cooling power is provided to both systems by a dual-coil, Telemark TVP-2000 cryo chiller, which circulates a proprietary refrigerant in a closed-loop system. The fridge is supplied with room temperature water from the building for cooling its internal heat exchanger. Two sets of vacuum-jacketed refrigerant lines connect the fridge to feedthroughs on the cryostats, allowing for a closed-loop flow of refrigerant through a copper heat exchanger submerged within the cold space of each cryostat. Each heat exchanger is suspended from the top flange, and consists of a copper tube with a 6 mm outer diameter brazed in a groove that meanders across a finned copper slab. The copper slabs are shaped as partial cylinders with a diameter close to the inner diameter of the cryostat, allowing for access to the central region where test chambers are suspended. This configuration is designed to promote convection of the cooling fluid. Cartridge heaters are embedded within the copper-slab heat exchangers to increase the rate of warming during xenon recovery. Thermocouples are fixed to the inlet tubing, outlet tubing, and at the top,