Material-Driven Optimization of Transmon Qubits for Scalable and Efficient Quantum Architectures

Jonnalagadda Gayatri, S.Saravana Veni · 2025

Read Material-Driven Optimization of Transmon Qubits for Scalable and Efficient Quantum Architectures by Jonnalagadda Gayatri, S.Saravana Veni (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-05339.txt.

Introduction

Jonnalagadda Gayatri and S. Saravana Veni optimize superconducting qubits through material choices in a 2025 paper. Transmon qubits are a leading design for quantum computers because they can be printed by lithography and resist charge noise. Their quality still depends on coherence time, coupling, and how much energy leaks to the surroundings.

The authors designed four-qubit and eight-qubit layouts in a circuit tool and studied each qubit's frequencies and energy states with simulation software. A cross-section model then let them swap superconductors and base materials to see effects on loss and field behavior. Material choice proved to sway device quality strongly. The combined design and simulation flow is offered as a practical route to more reliable qubit systems.

Catalog record

CREATORJonnalagadda Gayatri, S.Saravana Veni
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-05339

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Material-Driven Optimization of Transmon Qubits for Scalable and Efficient Quantum Architectures Jonnalagadda Gayatri, S.Saravana Veni Abstract One of the most crucial steps in creating practical quantum computers is designing scalable and efficient superconducting qubits. Coherence times, connections between individual qubits, and reduction of environmental noise are critical factors in the success of these qubits. Because they can be lithographically fabricated and are less sensitive to charge noise, superconducting qubits, especially those based on the Transmon architecture, have emerged as top contenders for scalable platforms. In this work, we use a combination of design iteration, material analysis, and simulation to tackle the superconducting qubit optimization challenge. We created transmon-based layouts for 4-qubits and 8-qubits using Qiskit Metal and conducted an individual analysis for each qubit. We investigated anharmonicity and extracted eigenfrequencies, computing participation ratios across several design passes, and identifying the top five energy eigenstates using Ansys HFSS. We then created a 2-D cross-section of a single qubit design in COMSOL Multiphysics to evaluate how different materials affect performance. This enables us to assign various superconducting materials and substrates and investigate their effects on energy loss and electromagnetic properties. Qubit coherence and overall device quality are significantly influenced by the materials chosen. This integrated framework of material-based simulation and circuit design offers a workable way to create reliable superconducting qubit systems and supports continued attempts to create scalable, fault-tolerant quantum computing. I Introduction Quantum computing stands at the forefront of technological innovation, offering novel approaches to solving computational problems that are intractable for classical systems. Its uses cover a wide range of fields, such as complicated optimization issues, quantum many-body simulations, and developments in cryptography protocols. Superconducting qubits have become a top contender among the many platforms created for quantum computation because of their incredibly fast gate speeds, compatibility with well-established semiconductor fabrication methods, and scalable integration with current microwave and cryogenic technologies. Superconducting qubits operate based on the quantum mechanical properties of superconductors—materials that exhibit zero electrical resistance at cryogenic temperatures. These qubits are typically realized using Josephson junctions, which allow for the controlled tunneling of Cooper pairs and enable the formation of discrete energy levels required for quantum logic operations ref1 . The development of superconducting qubit designs has progressed rapidly since the introduction of the Cooper-pair box in the late 1990s. Subsequent architectures such as the Transmon and Fluxonium were engineered to mitigate sensitivity to noise sources and extend coherence times. The Transmon design, in particular, has gained wide popularity due to its reduced susceptibility to charge noise and its seamless integration into scalable quantum systems ref2 . Building large-scale, fault-tolerant quantum processors is still a challenge despite tremendous progress. A thorough understanding of the interactions between the qubit shape, material characteristics, electromagnetic behavior, and ambient factors is necessary to accomplish this goal. Optimizing qubit performance and coherence requires a comprehensive strategy that combines systematic simulations, iterative hardware improvements, and quantum device modeling. To guide design decisions in this situation, it becomes essential to analyze qubit properties including energy level structures, anharmonicity, and field participation across various materials and layouts. In this research, we investigate superconducting qubit systems based on the Transmon architecture using a combination of Qiskit Metal and COMSOL Multiphysics. Qiskit Metal is an open source framework for the design of superconducting quantum chips and devices. COMSOL Multiphysics, on the other hand, provides a platform to simulate microwave structures and analyze electromagnetic properties. Our study begins with the design and simulation of two multi-qubit configurations: a 4-qubit and an 8-qubit chip. These systems were evaluated to understand the impact of scaling on important quantum properties. Individual qubits within each chip were analyzed to extract their resonance frequencies, calculate the eigenenergies of the first five quantum states, and assess anharmonicity. This comparison provides insight into the working of these qubits. To deepen the material-level analysis, we extended our study by performing a two-dimensional cross-sectional simulation of a single Transmon qubit using COMSOL. This analysis was performed for two different sets of superconducting materials and substrates, namely, combinations such as aluminum and niobium on a silicon substrate. This research presents a multilayered approach to understanding the performance of superconducting qubits, ranging from material-driven coherence enhancements to architectural scaling. The 2D material-specific work offers crucial information on how substrate and superconductor selections impact quantum device performance, while our comparison of 4- and 8-qubit layouts clarifies how circuit complexity affects qubit behavior. System- and material-level simulations work together to create a solid foundation for upcoming experiments and the construction of large-scale quantum processors. This research adds to ongoing attempts to create scalable, dependable, and high-performance superconducting quantum computers by fusing design tools with simulations based on physics ref3 . II METHODOLOGY In this study, we used a combined simulation workflow involving Qiskit Metal, Ansys HFSS, and COMSOL Multiphysics to design and analyze superconducting transmon qubits. The goal was to explore both scalable qubit architectures and material-dependent performance characteristics through multiplatform simulations. We began by designing two chip layouts, one containing four qubits and another with eight, using Qiskit Metal. These layouts included transmon qubits coupled to readout resonators and inter-qubit coupling structures. Parameterized components in the design allowed us to test variations in layout geometry, which are critical in scalable quantum systems. Qiskit Metal’s modular environment made it convenient to construct and export designs for further high-frequency simulations ref4 ; ref5 . The geometries were exported from Qiskit Metal to Ansys HFSS, a widely used finite element solver for electromagnetic field simulations in quantum circuits. Within HFSS, we performed eigenmode analyses to extract the resonance frequencies of each qubit. Simulations were conducted across multiple convergence passes to ensure high precision. From the simulated spectra, we calculated the eigenenergies of the first five quantum levels of each qubit and plotted their anharmonicities, which are essential for determining how distinguishable qubit states are from each other. We also plotted the wavefunctions of individual qubits. This level of electromagnetic analysis is consistent with previous work in the field that relies on HFSS for optimizing quantum hardware components ref6 . We manually built a two-dimensional cross-sectional model of a single transmon qubit in COMSOL Multiphysics to examine the effects of various materials on qubit performance. This method kept processing demands low while enabling high-resolution characterization of electromagnetic activity close to material interfaces. Because of its great geometric precision in simulating dielectric involvement and field confinement, COMSOL was selected. To mimic boundary conditions and precise structural details close to the capacitor pads and Josephson junction, an airbox and a user-controlled mesh were included. We simulated two configurations: both used a silicon substrate, but one employed aluminum as the superconducting metal and the other used niobium. These materials are commonly used in superconducting quantum devices due to their established fabrication compatibility and differing coherence characteristics. Niobium is known for higher critical temperature and mechanical stability, while aluminum-based devices have demonstrated long coherence times, particularly in planar transmon designs ref7 ; ref8 . To model the electric field behavior realistically, we grounded one of the metal pads and applied a potential to the other, thereby creating an electric potential difference across the structure. This setup emulates the charging and field conditions present in a transmon qubit and

Read the complete text