Microwave characterization of superconducting coplanar resonators made out of granular aluminium

Kelvin J. Ramos, Ivana Curci, Erick Potosí, Ignacio Lobato, Leonardo Salazar Alarcón, Hernán Pastoriza, Leandro Tosi · 2025

Read Microwave characterization of superconducting coplanar resonators made out of granular aluminium by Kelvin J. Ramos, Ivana Curci, Erick Potosí, Ignacio Lobato, Leonardo Salazar Alarcón, Hernán Pastoriza, Leandro Tosi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-03873.txt.

Introduction

Kelvin Ramos and co-authors measure microwave resonators made from granular aluminium, a disordered superconductor. The films mix aluminium grains with oxygen in varying amounts. Their 2025 paper designs and builds coplanar resonators from these films, then reads how their tones shift with temperature.

From those shifts the team extracts the large kinetic inductance that makes this material prized for compact quantum circuits. They also link inductance to film resistivity. At low temperature, quality factor tests across power levels revealed two-level systems, flaws bred by the growth process itself. The methods shown can guide designs of sensitive detectors, high-impedance resonators, and superinductors. Quantum hardware readers get a full recipe for characterizing a tricky material.

Catalog record

CREATORKelvin J. Ramos, Ivana Curci, Erick Potosí, Ignacio Lobato, Leonardo Salazar Alarcón, Hernán Pastoriza, Leandro Tosi
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-03873

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Microwave characterization of superconducting coplanar resonators made out of granular aluminium Kelvin J. Ramos, Ivana Curci, Erick Potosí, Ignacio Lobato, Leonardo Salazar Alarcón, Hernán Pastoriza, Leandro Tosi Abstract We have designed, fabricated and characterized microwave resonators made out of thin films of granular aluminium (grAl) with different oxygen content. We extract the contribution of the large kinetic-inductance of this disordered superconductor from the frequency shift of the resonators as a function of temperature, and discuss the correlation with the resistivity of the films. At low temperatures, measurements of the internal quality factor as a function of microwave power indicate the presence of two-level systems, which are inherent to the growth process of the granular aluminium. The characterization methods presented here may be useful for the design of MKIDs, high-impedance resonators and superinductors. I Introduction High kinetic inductance materials have become increasingly important for a wide variety of applications encompassing superconducting quantum circuits Peltonen et al. 2018 ; Kamenov et al. 2020 ; Winkel et al. 2020 ; Rieger et al. 2023 , quantum limited amplification Kher et al. 2016 ; Parker et al. 2022 ; Zhao et al. 2023 ; Mantegazzini et al. 2023 ; Giachero et al. 2023 ; Splitthoff et al. 2024 ; Zapata et al. 2024 , high-impedance Janík et al. 2025 ; Günzler et al. 2025 and magnetic-field-resilient Samkharadze et al. 2016 ; Müller et al. 2022 ; Roy et al. 2025 microwave resonators, and also the development of kinetic-inductance photon detectors Day et al. 2003 ; Mazin 2009 ; Zmuidzinas 2012 ; Day et al. 2024 . Since a large kinetic inductance is associated to a reduced density of carriers in the superconducting condensate Schmidt 2013 ; Tinkham 2004 , to a large extent the research is focused on the microwave characterization of the so-called “disordered superconductors” Mazin 2020 including alloys such as TiN Leduc et al. 2010 ; Vissers et al. 2010 , NbN Annunziata et al. 2010 ; Hayashi et al. 2014 ; Carter et al. 2019 ; Niepce et al. 2019 ; Zollitsch et al. 2019 ; Mahashabde et al. 2020 ; Wei et al. 2020 ; Yu et al. 2021 ; Frasca et al. 2023 and NbTiN Xu et al. 2019 ; Bretz-Sullivan et al. 2022 ; Yang et al. 2024 and granular materials Glezer Moshe et al. 2020 like granular aluminium Rotzinger et al. 2016 ; Maleeva et al. 2018 . Granular aluminium (grAl) is a paradigmatic material that has served as a test-bed to explore the superconducting-insulating transition Deutscher et al. 1973a ; Levy-Bertrand et al. 2019 and the role of Josephson coupling in a quasi-2D disordered superconductor in connection to Josephson junction arrays Pracht et al. 2016 ; Maleeva et al. 2018 . It is obtained by introducing a small partial pressure of oxygen during the deposition of Al via sputtering or evaporation. The resulting films consist of small grains of Al in a matrix of insulating aluminium oxide Deutscher et al. 1973b ; Ziemann et al. 1978 ; Rotzinger et al. 2016 ; Levy-Bertrand et al. 2019 ; Janík et al. 2025 . The grain size can be controlled with the temperature during growth Deshpande et al. 2025 and electrical properties are governed by the percentage of oxygen. The more the Al is oxidized, the larger the sheet resistance and disorder, and in turn, the larger the kinetic inductance. The microwave characterization of superconducting resonators made out of grAl has proved that high quality factors Rotzinger et al. 2016 ; Zhang et al. 2019 ; Kamenov et al. 2020 ; He et al. 2021 ; Gupta et al. 2025 , magnetic field resilience Borisov et al. 2020 and high impedance Gupta et al. 2025 ; Janík et al. 2025 are within reach. A common issue is the reproducibility in the fabrication of the films, which has been recently addressed with a remote real-time monitoring of the resistance Janík et al. 2025 . Other concerns are out-of-equilibrium quasiparticles and the role of two-level systems (TLS) limiting the quality factor Grünhaupt et al. 2018 ; Valenti et al. 2018 ; Kristen et al. 2023 . In this work we present our measurements of coplanar waveguide (CPW) resonators Pozar 2000 ; Simons 2004 ; Göppl et al. 2008 made out of grAl films with different oxygen content. We extract the kinetic inductance fraction by fitting the relative frequency shift as a function of temperature with Mathis-Bardeen theory Mattis and Bardeen 1958 , and compare with the expected value given by the sheet resistance. At low temperatures, we fit the power dependence of the quality factor taking into account the presence of TLS, and obtain relevant parameters that characterize our films. We believe that the characterization methods presented here can be useful to the community of high kinetic inductance devices. Figure 1: Temperature dependence of resonance frequency: (a) Measured amplitude and (b) phase of the transmission coefficient S_{21} as a function of frequency at various temperatures (indicated by color). (c) |S_{21}| as a function of temperature and frequency in gray-scale map. The dashed line in red represents the fit of resonance frequency using Mattis-Bardeen theory (see text). II Kinetic inductance determination Probably the simplest way to extract the kinetic inductance of a thin film is to fabricate a wire with length l and width w , measure the sheet resistance at room temperature R^{\square}_{n} and use the expression Valenti et al. 2019 ; Annunziata et al. 2010 L^{\square}_{k}=\frac{1}{1.76\pi}\frac{\hbar R^{\square}_{n}}{k_{B}T_{c}}, (1) which arises from BCS, valid at temperatures much lower than the critical temperature T_{c} , T\ll T_{c} . The sheet inductance can be increased by decreasing the thickness of the film López-Núñez et al. 2023 . In this work we follow a different path, which relies on increasing the disorder controlled by the oxidation of the grAl. The estimation provided by this method improves using the sheet resistance at low temperatures (ideally at zero K). Another common approach to obtain the kinetic inductance contribution is to fabricate a meander or a coil and directly measure the inductance with an LCR meter Zhdanova et al. 2024 or embedded in a tank-circuit Weitzel et al. 2023 . However, the preferred choice for high-frequency applications is to fabricate microwave resonators on a high-quality substrate, to obtain information about the losses added by the disordered superconductor. For lumped element resonators, the resonance frequency is given by \frac{1}{2\pi\sqrt{L_{t}C}} , where L_{t}=L_{g}+L_{k} is the total inductance (geometric plus kinetic) and C is the geometrical capacitance. The kinetic inductance fraction or ratio can be extracted from the resulting frequency shift 1-\left(\frac{f_{0}}{f_{g}}\right)^{2}=\frac{L_{k}}{L_{g}+L_{k}}\equiv\alpha, (2) between the measured frequency f_{0} and resonance frequency without kinetic inductance f_{g} . This procedure requires prior knowledge of f_{g} which can be obtained from electromagnetic finite-element simulations or analytic expressions depending on the geometry. In the case of distributed resonators, what matters is the impact of the kinetic inductance on the propagation velocity v=\frac{1}{\sqrt{\mathcal{L}_{t}\mathcal{C}}} and the characteristic impedance Z=\sqrt{\frac{\mathcal{L}_{t}}{\mathcal{C}}} determined by the total inductance \mathcal{L}_{t}=\mathcal{L}_{g}+\mathcal{L}_{k} and capacitance \mathcal{C} per unit length Watanabe et al. 1994 ; Porch et al. 2005 ; Gao 2008 . For a quarter-wavelength resonator of length \ell , the resonance frequency is f_{\text{CPW}}=\frac{v}{4\ell} , and then, 1-\left(\frac{f_{0}^{\text{CPW}}}{f_{g}^{\text{CPW}}}\right)^{2}=\frac{\mathcal{L}_{k}}{\mathcal{L}_{g}+\mathcal{L}_{k}}=\alpha, (3) provides the information

Read the complete text