Balancing Latency and Model Accuracy for Fluid Antenna-Assisted LM-Embedded MIMO Network

Yichen Jin 1 , Zongze Li 2 , Zeyi Ren 1 , Qingfeng Lin 1 , and Yik-Chung Wu 1 · 2025

Read Balancing Latency and Model Accuracy for Fluid Antenna-Assisted LM-Embedded MIMO Network by Yichen Jin 1 , Zongze Li 2 , Zeyi Ren 1 , Qingfeng Lin 1 , and Yik-Chung Wu 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-01689.txt.

Introduction

Yichen Jin and co-authors tackle a trade-off in wireless networks that run large models, in a 2025 paper. Users need fast replies, but cutting a model down to save time can lower the quality of its answers. The team studies a network where antennas can shift position to boost signal flow.

Movable antennas raise the data rate, which cuts delay without forcing deeper cuts to the model. The design weighs delay against a score for output quality, and the team offers a stepwise method to balance the two. Tests show the method settles well and beats standard network designs on both delay and quality. The work speaks to future networks that must serve smart tools in real time.

Catalog record

CREATORYichen Jin 1 , Zongze Li 2 , Zeyi Ren 1 , Qingfeng Lin 1 , and Yik-Chung Wu 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-01689

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Balancing Latency and Model Accuracy for Fluid Antenna-Assisted LM-Embedded MIMO Network Yichen Jin 1 , Zongze Li 2 , Zeyi Ren 1 , Qingfeng Lin 1 , and Yik-Chung Wu 1 Abstract This paper addresses the challenge of large model (LM)-embedded wireless network for handling the trade-off problem of model accuracy and network latency. To guarantee a high-quality of users’ service, the network latency should be minimized while maintaining an acceptable inference accuracy. To meet this requirement, LM quantization is proposed to reduce the latency. However, the excessive quantization may destroy the accuracy of LM inference. To this end, a promising fluid antenna (FA) technology is investigated for enhancing the transmission capacity, leading to a lower network latency in the LM-embedded multiple-input multiple-output (MIMO) network. To design the FA-assisted LM-embedded network with the lower latency and higher accuracy requirements, the latency and peak signal to-noise ratio (PSNR) are considered in the objective function. Then, an efficient optimization algorithm is proposed under the block coordinate descent framework. Simulation results are provided to show the convergence behavior of the proposed algorithm, and the performance gains from the proposed FA-assisted LM-embedded network over the other benchmark networks in terms of network latency and PSNR. I Introduction In the future, more and more wireless applications, such as autonomous driving, will be implemented based on large models (LMs). Although the integration of LM in 6G networks offers significant benefits, the LM requires substantial computational resources, which is challenging for resource-constrained and latency-sensitive wireless users. As a result, the LM is usually implemented on the edge or cloud servers. However, with the explosive growth of data in LM for offloading and training at servers, the network latency, including the offloading latency and inference latency, has significantly increased. Hence, it is crucial to ensure the network latency within the tolerance level for the LM-embedded wireless network [ 1 ] . The traditional methods to reduce network latency rely on model quantization [ 2 ] , which enables the less storage space and the smaller volume of data offloading. However, the aggressive quantization may lead to a significant degradation in model accuracy, adversely affecting the users’ experience. In balancing between the model accuracy and network latency, the fluid antenna (FA) is emerging as one of the most promising tools to reduce the network latency of wireless systems without sacrificing the model accuracy. To be specific, the FA provides the higher spatial degrees of freedom (DoFs) by adjusting the physical positions of the antennas, leading to a higher transmission rate for data offloading [ 3 , 4 ] . As a result, a significant lower offloading latency can be obtained. Pioneering works on the FA-assisted LM-embedded wireless network have explored the benefits that FA brings to the model training and convergence performance [ 5 , 6 ] . However, these results primarily focused on the training phase for single-antenna users but did not investigate the inference phase and the more practical scenarios involving multi-antenna users. Due to the discrete quantization model employed for latency reduction, the network design problem becomes a non-convex mixed-integer problem, which is generally difficult to solve. Worse still, the FA deployment would significantly exacerbate the non-convexity due to the strongly coupling variables in antenna distance constraint [ 4 ] . The situation is even more challenging if there exists multi-antenna users. Yet, a systematic and tractable approach for handling the complicated discrete non-convex optimization in FA-assisted LM-embedded wireless network and jointly optimizing the network latency and model accuracy has not been studied before. To overcome the above challenges and fill this gap, this paper for the first time reveals an equivalent transformation to handle the quantization model for FA-assisted LM-embedded MIMO network. To be specific, we first formulate a novel loss function, which jointly combines the network latency and the quality of quantized features. Then, an efficient optimization algorithm is proposed under the block coordinate descent (BCD) framework, where the subproblems can be solved with closed-form solutions, sequential update algorithms, and the Riemannian alternating direction method of multipliers (RADMM) [ 7 ] , respectively. Finally, extensive simulation results are provided to show the convergence behavior of the proposed algorithm, and the performance gains from the proposed FA-assisted LM-embedded network over the benchmark networks in terms of network latency and peak signal to noise ratio (PSNR). II System Model and Problem Formulation II-A System Model This paper explores an LM-embedded network serving multi-antenna users for their edge inference tasks, as shown in Fig. 1 . Specifically, the network consists of a base station (BS) equipped with M FAs and a server computing for LM inference. There are U users, each equipped with A fixed-position antennas (FPAs). For simplicity, we define \mathcal{U}=\{1,2,\ldots,U\} as the set of users, \mathcal{A}=\{1,2,\ldots,A\} as the set of antennas of each user, and \mathcal{M}=\{1,2,\ldots,M\} as the set of FAs of the BS. Fig. 1: Illustration of the FA-assisted wireless system. In the proposed wireless system, the FAs can move freely within their antenna panel, and the system employs space-division multiple access to enable users to communicate concurrently with the BS [ 4 ] . Therefore, the number of users’ antennas does not exceed the number of FAs of the BS, i.e., UA\leq M . It is assumed that the time required for adjusting FA positions is negligible [ 4 ] . Let \mathbf{t}_{u,a}\triangleq\left[x_{t_{u,a}},y_{t_{u,a}}\right]^{T} represent the position of the a -th antenna of the u -th user, \forall a\in\mathcal{A} and \forall u\in\mathcal{U} . These antenna positions can be aggregated to form a matrix, denoted as \mathbf{T}=\left[\mathbf{t}_{1,1},\mathbf{t}_{1,2},\ldots,\mathbf{t}_{1,A},\mathbf{t}_{2,1},\ldots,\mathbf{t}_{U,A}\right] . Similarly, the position of the m -th FA of the BS can be denoted as \mathbf{r}_{m}=\left[x_{r_{m}},y_{r_{m}}\right]^{T} , \forall m\in\mathcal{M} . The corresponding matrix is defined as \mathbf{R}=\left[\mathbf{r}_{1},\mathbf{r}_{2},\ldots,\mathbf{r}_{M}\right] . The narrow-band quasi-static and far-field model is used to formulate the channel, and the channel can be expressed by a function with respect to FA positions [ 4 ] . In particular, the array response matrix of the BS is denoted by \mathbf{F}\left(\mathbf{R}\right)=\left[\mathbf{f}_{1}(\mathbf{R}),\mathbf{f}_{2}(\mathbf{R}),\dots,\mathbf{f}_{U}(\mathbf{R})\right] , and \mathbf{f}_{u}(\mathbf{R}) is given by \displaystyle\mathbf{f}_{u}(\mathbf{R})=\left[\exp\left\{j\frac{2\pi}{\lambda}\rho_{u}(\mathbf{r}_{1})\right\},\ldots,\exp\left\{j\frac{2\pi}{\lambda}\rho_{u}(\mathbf{r}_{M})\right\}\right]^{T}, (1) where \lambda represents the carrier wavelength, and \rho_{u}(\mathbf{r}_{m})\triangleq x_{r_{m}}\sin\theta_{r}^{u}\cos\phi_{r}^{u}+y_{r_{m}}\cos\theta_{r}^{u} with \theta_{r}^{u} and \phi_{r}^{u} denoting the elevation and azimuth angles of arrival of the u -th user. The array steering matrix of the users is given by \mathbf{G}=\left[\mathbf{g}_{1},\mathbf{g}_{2},\dots,\mathbf{g}_{U}\right] , where the \mathbf{g}_{u} is defined as \mathbf{g}_{u}=\left[\exp\left\{j\frac{2\pi}{\lambda}\rho_{u,1}\right\},~~\ldots,~~\exp\left\{j\frac{2\pi}{\lambda}\rho_{u,A}\right\}\right]^{T} , and \rho_{u,a}\triangleq x_{t_{u,a}}\sin\theta_{t}^{u}\cos\phi_{t}^{u}+y_{t_{u,a}}\cos\theta_{t}^{u} with \theta_{t}^{u} and \phi_{t}^{u} denoting the elevation and azimuth angles of departure of the u -th user. Based on this, [ 8 , 4 ] defined the channel as \mathbf{H}\left(\mathbf{R}\right) . During uplink transmission, users transmit their feature embeddings to the server, and the signal at the BS can be expressed as \displaystyle\mathbf{y}_{ul}=\mathbf{W}^{H}\mathbf{H}\left(\mathbf{R}\right)\mathbf{P}^{\frac{1}{2}}\mathbf{s}+\mathbf{W}^{H}\mathbf{n}, (2) where \mathbf{W}=\left[\mathbf{w}_{1,1},\mathbf{w}_{1,2},\ldots,\mathbf{w}_{U,A}\right] represents the receive beamforming matrix. The channel of entire system is given by \mathbf{H}\left(\mathbf{R}\right)=\left[\mathbf{H}_{1},\mathbf{H}_{2},\dots,\mathbf{H}_{U}\right] with \mathbf{H}_{u} being the channel of user u . The matrix \mathbf{P}=\operatorname{diag}\left[p_{1,1},p_{1,2},\ldots,p_{U,A}\right] is a diagonal matrix representing users’ transmit power, with its elements \{p_{u,a}\}_{u=1,a=1}^{U,A} denoting the power allocated to the a -th antenna of user u . It is assumed that the equal power distribution is adopted by all users to their antennas. The transmitted signal \mathbf{s} has unit power, \mathbb{E}\left\{\mathbf{s}\mathbf{s}^{H}\right\}=\mathbf{I}_{U\times A} , and \mathbf{n}\sim\mathcal{CN}\left(\mathbf{0},\sigma^{2}\mathbf{I}_{M}\right) is the additive white Gaussian noise with variance being \sigma^{2} . Accordingly, the uplink

Read the complete text