Self-cooling, blue-detuned dissipative Kerr microresonator soliton comb
Kenji Nishimoto, Kaoru Minoshima, Naoya Kuse · 2025
Read Self-cooling, blue-detuned dissipative Kerr microresonator soliton comb by Kenji Nishimoto, Kaoru Minoshima, Naoya Kuse (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-00432.txt.
Introduction
A chip that combs light into fine, even teeth makes a ruler for spectra, but heat jitters its beat. Kenji Nishimoto, Kaoru Minoshima, and Naoya Kuse cool that jitter from inside in 2025. Their comb is a ring pair whose pump laser sits on the blue side of its peak, a side long thought barren for such combs.
A mode-crossing tweak opens the blue side. There, the pump does two jobs: it seeds the comb, and it cools the very mode it feeds. The beat's noise fell by up to 14.5 decibels. The comb also turned over a third of the pump light into comb light. Heat-proof combs on a chip would serve clocks, sensors, and fast links alike.
Catalog record
| CREATOR | Kenji Nishimoto, Kaoru Minoshima, Naoya Kuse |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 31 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-00432
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Self-cooling, blue-detuned dissipative Kerr microresonator soliton comb Preprint: AIP/123-QED Kenji Nishimoto, Kaoru Minoshima, Naoya Kuse Abstract Dissipative Kerr solitons (DKSs) generated in high-Q microresonators driven by continuous-wave (CW) lasers provide chip-scale optical frequency combs composed of mutually coherent CW lines. However, their small mode volume makes them highly susceptible to thermal fluctuations, and the resulting thermo-refractive noise (TRN) perturbs the repetition rate f rep f_{\rm rep} . Here, we experimentally demonstrate a “blue-detuned” DKS in a coupled-ring microresonator. By employing avoided-mode-crossing (AMX)-induced dispersion engineering at the pump mode, DKSs are generated even when the pump laser is tuned to the higher-frequency (blue) side of the resonance. In this regime, the pump laser not only seeds DKS formation but also serves as a cooling laser for the thermally sensitive pumped mode. We observe a self-cooling effect that reduces the phase noise of f rep f_{\rm rep} by up to 14.5 dB, while achieving a pump-to-comb conversion efficiency as high as 37%. These results establish blue-detuned DKSs as a thermally robust and power-efficient solution for integrated microcomb systems, eliminating the need for auxiliary lasers. I Introduction Figure 1: (a) Concept of the pump-AMX configuration. Red and blue resonances show the resonances of the main and auxiliary rings, respectively. The purple line shows the frequency of the pump CW laser. At the pump mode, AMX is introduced, and the resonances are repulsed by the amount of \varepsilon , modifying the detuning relation as \alpha_{\rm comb}=\alpha_{\rm pump}+\varepsilon , which allows \alpha_{\rm comb}>\sqrt{3} while \alpha_{\rm pump}<0 , enabling a blue-detuned DKS. For the blue-detuned DKS, the self-cooling effect is expected as shown in the bottom figure. (b) Schematic of the coupled-ring microresonator. The main ring generates the DKS, and the auxiliary ring controls AMX via a microheater. (c) Measured resonance-frequency shifts near 193.97~\mathrm{THz} versus heater power. Colored curves show the coupled resonances, dotted lines indicate the uncoupled resonances calculated using Eq. ( 1 ). Dissipative Kerr solitons (DKSs), generated by pumping high-Q microresonators with continuous-wave (CW) lasers, have emerged as a chip-scale platform for broadband, phase-stable optical frequency combs Herr et al. 2014 ; Kippenberg et al. 2018 . In recent years, wafer-scale integrated microresonators based on Si 3 N 4 Xiang, Jin, and Bowers 2022 ; Ji et al. 2024 have enabled full on-chip integration of DKSs Xiang et al. 2021 . Moreover, the extremely short cavity length of microresonators allows mode spacing ( f_{\rm rep} ) in the GHz–THz range Liu et al. 2020 ; Helgason et al. 2021 ; Pfeiffer et al. 2017 , supporting applications such as optical atomic clocks Newman et al. 2019 ; Wu et al. 2025 , mm/THz wave generation Kudelin et al. 2024 ; Kuse et al. 2022 ; Tetsumoto et al. 2021 , parallelized LiDAR Riemensberger et al. 2020 , optical communications Marin-Palomo et al. 2017 ; Corcoran et al. 2025 , and optical computing Feldmann et al. 2021 ; Xu et al. 2021 . For mm/THz wireless communication and radar systems that employ mm/THz carriers generated from DKSs, the phase noise of f_{\rm rep} is critical Tokizane et al. 2023 ; Jia et al. 2025 ; Kittlaus et al. 2021 , since the phase noise of mm/THz carriers directly corresponds to that of f_{\rm rep} . The phase noise of f_{\rm rep} also limits that of individual comb modes Nishimoto et al. 2020 ; Lei et al. 2022 , which is important for optical communications Corcoran et al. 2025 and LiDAR Riemensberger et al. 2020 due to noise magnification relative to the pump mode. This phase noise is fundamentally limited by thermo-refractive noise (TRN) in microresonators Stone and Papp 2020 ; Huang et al. 2019 ; Nishimoto et al. 2020 ; Lei et al. 2022 ; Yang et al. 2021 , owing to their small mode volume. To suppress the phase noise, both active and passive approaches have been reported. In active schemes, f_{\rm rep} is stabilized to low-noise CW lasers Tetsumoto et al. 2021 or long fiber delay lines Kuse et al. 2022 . However, such active methods introduce additional components and complexity, undermining the chip-scale advantage of DKS systems. Alternatively, passive approaches have been explored, in which TRN is optically suppressed—so-called self-cooling. In the self-cooling method, an optical carrier is coupled to the blue-detuned side of a resonance Drake et al. 2020 ; Nishimoto et al. 2022 . The optical carrier can be provided by another laser Drake et al. 2020 or by a sideband derived from the pump CW laser Nishimoto et al. 2022 . Nevertheless, systems that employ an additional optical carrier suffer from increased complexity and issues such as noise transfer from the cooling laser, unwanted parametric oscillations, and modulation instability Nishimoto et al. 2022 . To address these limitations, alternative schemes have been proposed in which the pump laser used for DKS generation is simultaneously coupled to an additional cavity mode to induce cooling Lei, Ye, and Torres-Company 2022 . For instance, by exciting modes from different mode families (e.g., TE and TM) within the same resonator, one can generate a DKS in one mode while suppressing thermal fluctuations through another. However, this approach still imposes new technical constraints, including complex polarization control and low yield due to poor tolerance to fabrication errors. Here, we focus on a localized dispersion shift enabled by photonic-crystal rings (PhC rings) Yu et al. 2021 ; Yu et al. 2022 ; Lucas et al. 2023 ; Moille et al. 2023 and coupled-ring microresonators Helgason et al. 2021 ; Tikan et al. 2021 ; Helgason et al. 2023 . Such a shift arises from the repulsive interaction between two closely spaced resonances in different mode families, an effect known as avoided mode crossings (AMX) Liu et al. 2014 ; Miller et al. 2015 . The resulting local modification of dispersion alters the phase-matching condition and enables deterministic and spontaneous DKS generation Yu et al. 2021 , substantial enhancement of conversion efficiency Helgason et al. 2023 , spectral shaping andbroadening Moille et al. 2018 ; Moille et al. 2023 ; Nishimoto, Minoshima, and Kuse 2023 ; Lucas et al. 2023 , active tuning of dispersive waves Okawachi et al. 2022 , and dark-soliton generation Helgason et al. 2021 ; Yu et al. 2022 . When a localized dispersion shift is introduced at the resonance pumped by the CW laser in an anomalous-dispersion microresonator (hereafter referred to as the pump-AMX configuration), the formation mechanism and properties of DKSs are modified because the comb detuning ( \alpha_{\rm comb} ) differs from the pump detuning ( \alpha_{\rm pump} ). Here, \alpha_{\rm comb} is the detuning between the pump CW laser and the original resonance frequency ignoring AMX, and \alpha_{\rm pump} is the detuning between the pump CW laser and the actual resonance with AMX. Both are normalized by half the resonance linewidth. Spontaneous DKS generation that bypasses a chaotic-comb regime is possible when \alpha_{\rm comb}>0 and \alpha_{\rm pump}<0 , in which no phase-matching condition for a Turing pattern is satisfied Yu et al. 2021 . In addition, for \alpha_{\rm comb}>0 and \alpha_{\rm pump}\approx 0 , the coupling efficiency between the DKS and the pump CW laser is improved, leading to pump-to-comb energy conversion efficiencies approaching 60\% , well