Quasi-continuous sub- μ \mu K strontium source without a high-finesse cavity stabilized laser
Sana Boughdachi, Benedikt Heizenreder, Ananya Sitaram, Erik Dierikx, Yan Xie, Sander Klemann, Paul Klop, Jeroen Koelemeij, Rafał Wilk, Florian Schreck, Andreas Brodschelm · 2025
Read Quasi-continuous sub- μ \mu K strontium source without a high-finesse cavity stabilized laser by Sana Boughdachi, Benedikt Heizenreder, Ananya Sitaram, Erik Dierikx, Yan Xie, Sander Klemann, Paul Klop, Jeroen Koelemeij, Rafał Wilk, Florian Schreck, Andreas Brodschelm (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-23617.txt.
Introduction
Ultra-cold strontium atoms power fine clocks and sensors, but the lasers that chill them are often bulky and hard to lock. Sana Boughdachi and co-authors built a near-steady cold source that skips the usual high-grade laser lock, in work from twenty twenty-five. A fiber-based comb of light lines serves as the guide for the laser pitch.
The comb held pitch as well as a locked laser in tests with two trap styles. The team made high-flow clouds below one micro-degree for all three stable forms of the atom. Atoms could be drawn out of the trap in a near-steady stream. The setup points to small, tough cold-atom tools that can leave the lab.
Catalog record
| CREATOR | Sana Boughdachi, Benedikt Heizenreder, Ananya Sitaram, Erik Dierikx, Yan Xie, Sander Klemann, Paul Klop, Jeroen Koelemeij, Rafał Wilk, Florian Schreck, Andreas Brodschelm |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-23617
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Quasi-continuous sub- μ \mu K strontium source without a high-finesse cavity stabilized laser Preprint: APS/123-QED Sana Boughdachi, Benedikt Heizenreder, Ananya Sitaram, Erik Dierikx, Yan Xie, Sander Klemann, Paul Klop, Jeroen Koelemeij, Rafał Wilk, Florian Schreck, Andreas Brodschelm Abstract We demonstrate a quasi-continuous sub- μ \mu K strontium source achieved without the use of a high-finesse cavity-locked laser. Our frequency reference is based on a dispersion-optimized, fiber-based frequency comb that enables sub-kHz linewidths. The long-term stability of the comb is defined by an external RF reference: either a 10 MHz RF signal from the Dutch Metrology Institute (VSL), or a tunable RF source whose long-term stability is maintained by monitoring and stabilizing the position of a narrow-line magneto-optical trap (MOT) Sillus et al. 2021 ; Heizenreder et al. 2025 . The comb-stabilized system is benchmarked against a conventional cavity-locked laser and achieves comparable performance in broadband and single-frequency MOTs using the narrow 1 S 0 → \rightarrow 3 P 1 laser cooling transition. We generate high-flux, sub- μ \mu K samples of all three bosonic strontium isotopes and demonstrate quasi-continuous outcoupling from the MOT. These results highlight the system’s suitability for compact, robust, and field-deployable continuous cold atom devices. I Introduction The development of ultra-cold atomic sources has revolutionized precision measurement, driving progress in optical lattice clocks Bothwell et al. 2022 ; Katori et al. 2003 ; McGrew et al. 2018 and other quantum sensors Müller et al. 2008 ; Panda et al. 2024 ; Stray et al. 2022 . In recent years, there has been growing interest in continuous high-density ultra-cold atomic sources Chen et al. 2022 ; Dubey et al. 2025 ; Schäfer et al. 2025 ; Escudero et al. 2021 ; Singh et al. 2022 ; Okaba et al. 2024 ; Norcia et al. 2024 ; Li et al. 2025 ; Chiu et al. 2025 . Strontium, as an alkaline-earth element, is particularly well-suited for continuous cold atom sources due to its narrow optical transitions, which enable narrow-linewidth laser cooling schemes Katori et al. 1999 ; Chen et al. 2025 ; Chen et al. 2019 ; Hobson et al. 2020 ; Cooper et al. 2018 . Traditionally, such narrow-line cooling schemes rely on laser systems stabilized to high-finesse optical cavities Stellmer 2013 ; Qiao et al. 2019 , which can provide laser linewidths well below that of the narrow cooling transition. While these cavities offer excellent short-term frequency stability, they require meticulous alignment and are sensitive to environmental perturbations that limit operational robustness and long-term reliability. Thus, a key challenge is to achieve narrow-linewidth laser stabilization without reliance on environmentally sensitive cavities. One alternative stabilization method is via a frequency comb, though typical fiber-based combs suffer from linewidth broadening due to oscillator pump-induced noise, environmental fluctuations, and quantum noise, compromising their use in narrow-linewidth laser cooling or other precision applications Newbury and Swann 2007 . To overcome these limitations, we introduce a dispersion-engineered frequency comb and demonstrate its use for a quasi-continuous ultracold strontium source. The frequency comb is generated using mode-locked Er:fiber oscillators, which are intrinsically insensitive to pump-induced fluctuations by dispersion engineering. These measures preserve the coherence and spectral purity of individual comb teeth, enabling direct laser stabilization with sub-kHz precision by locking its repetition-rate to an RF reference. The reduced susceptibility to thermal and vibrational noise also enables easier integration into compact, transportable quantum platforms. Through a non-linear conversion processes, a broad spectral range extending from 420 nm to beyond 2000 nm can be obtained, creating an architecture adaptable for narrow-linewidth laser cooling of strontium at 429 THz but also for a wide range of other narrow-linewidth alkaline-earth(-like) Adamczyk et al. 2025 ; Chen et al. 2024 and lanthanide atoms Frisch et al. 2012 ; Lu et al. 2011 . We use our fully fiber-based frequency comb to generate the ultracold strontium source by directly locking the narrow-line cooling laser to it without any need of a high-finesse free-space reference cavity. Thanks to its broad coverage and flexible offset-locking capabilities, our system supports laser cooling of all three stable bosonic strontium isotopes using a single unified laser architecture. Combined with a robust laser cooling setup, this enables the generation of a continuous source of ultra-cold strontium atoms at \mu K temperatures. To ensure long-term frequency stability of the comb, its repetition rate must be stabilized to an external reference. We employ two approaches, which we compare against a cavity-based laser system: a highly stable external RF reference, specifically a 10 MHz signal provided by the Dutch Metrology Institute VSL Dierikx et al. 2016 , and a self-contained stabilization scheme locking the comb to a tunable oven-controlled crystal oscillator, which is referenced to the MOT position Heizenreder et al. 2025 . The scheme enables robust operation even in the absence of external frequency standards. Finally, we introduce a technique for quasi-continuous out-coupling of sub- \mu K atoms from the MOT, highlighting the potential of this platform for zero-dead-time optical lattice clocks Katori 2021 ; Biedermann et al. 2013 , portable clocks Grotti et al. 2024 ; Takamoto et al. 2020 , and quantum devices that require quasi-continuous atomic sources Norcia et al. 2024 ; Gyger et al. 2024 ; Chen et al. 2022 ; Li et al. 2025 ; Chiu et al. 2025 . The remainder of this article is organized as follows: in Section II.1 , we give some background on the fundamental noise sources of frequency combs and the theoretical framework to model them. We then characterize the influence of pump-induced noise on the repetition rate of our frequency comb, validate the measurements against theory predictions ( II.2 ), and discuss long-term stability of the repetition rate and carrier-envelope offset frequency ( II.3 ). We next show how the frequency comb can be used as laser frequency reference for our quasi-continuous ultracold strontium source ( III.1 ), characterize the long-term stability of the system when using either a stable 10 MHz reference or the MOT position to stabilize the frequency comb ( III.2 ), and benchmark the performance against that of a conventional cavity-locked laser system. Finally, we demonstrate how we can use this architecture to achieve quasi-continuous outcoupling of atoms from a MOT ( III.3 ). II Cavity-Free Frequency Reference Optical frequency combs (OFCs) produce a stable and evenly spaced set of optical frequencies, effectively bridging the optical and radio frequency domains. Each comb line is described by the relation: \displaystyle f_{n}=f_{\text{CEO}}+nf_{\text{r}}, (1) where f_{\text{CEO}} is the carrier-envelope offset frequency, f_{\text{r}} is the repetition rate, and n is an integer mode index Kliese et al. 2016 . One key advantage of OFCs, particularly those generated by Er-doped fiber-based oscillators, is their stability and ease of use. In such OFCs, the Er-fiber oscillator locked to the RF reference typically operates at 1550 nm. The 80 MHz output of the Er-doped fiber oscillator is amplified in an Er-doped fiber and then spectrally broadened through self-phase modulation (SPM) in a highly nonlinear fiber (HNLF). The broadened spectrum is subsequently frequency-doubled using second-harmonic generation (SHG) to reach the necessary spectral range. For our application, a continuous-wave (CW) diode laser operating at 689 nm is then phase-locked to the corresponding comb tooth to provide sufficient optical power. This