Preliminary design and simulation for CEPC fast luminosity monitor detector based on 4H-SiC Journal: Nuclear Instruments and Methods in Physics Research Section A
Yanpeng Li, Meng Li, Xingrui Wang, Weimin Song, Xiyuan Zhang, Congcong Wang, Suyu Xiao, Haoyu Shi, Dou Wang, Philip Bambade, Xin Shi · 2025
Read Preliminary design and simulation for CEPC fast luminosity monitor detector based on 4H-SiC Journal: Nuclear Instruments and Methods in Physics Research Section A by Yanpeng Li, Meng Li, Xingrui Wang, Weimin Song, Xiyuan Zhang, Congcong Wang, Suyu Xiao, Haoyu Shi, Dou Wang, Philip Bambade, Xin Shi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-23368.txt.
Introduction
Yanpeng Li and co-authors design a fast luminosity monitor for a planned Chinese collider, in a 2025 paper. The Circular Electron-Positron Collider aims for very high collision rates in its Higgs mode, using a scheme that squeezes the beams. Tiny beams are sensitive to shaking of the final focusing parts, which can shift the beams and cut the rate.
A dithering system steadies the beams based on the measured rate, so the monitor must be fast and precise. Their design uses an array of radiation detectors made from a silicon carbide material, placed at key points, with timing at the picosecond scale. Home-built simulation software tunes the active area to reach two percent precision at a kilohertz rate. A total current signal tracks rate loss in a near-linear way, allowing live monitoring for the control system.
Catalog record
| CREATOR | Yanpeng Li, Meng Li, Xingrui Wang, Weimin Song, Xiyuan Zhang, Congcong Wang, Suyu Xiao, Haoyu Shi, Dou Wang, Philip Bambade, Xin Shi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-23368
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Preliminary design and simulation for CEPC fast luminosity monitor detector based on 4H-SiC Journal: Nuclear Instruments and Methods in Physics Research Section A Yanpeng Li, Meng Li, Xingrui Wang, Weimin Song, Xiyuan Zhang, Congcong Wang, Suyu Xiao, Haoyu Shi, Dou Wang, Philip Bambade, Xin Shi Abstract The Circular Electron-Positron Collider (CEPC), a next-generation high-luminosity collider, employs a crab waist scheme to achieve ultrahigh 5 × 10 34 cm − 2 s − 1 5\times 10^{34}\,\text{cm}^{-2}\text{s}^{-1} luminosity at Higgs mode. Owing to the extremely small beam size, the luminosity is highly sensitive to the stability of final focusing elements, where mechanical vibrations (e.g. ground motion) may induce beam offsets and luminosity degradation. To address this, a luminosity-driven dithering system is implemented for horizontal beam stabilization. In this work, we develop an optimized 4H-SiC fast luminosity detector scheme using an array of radiation detectors with picosecond time resolution positioned at critical locations. By using self-development software RAdiation SEmiconductoR (RASER), we optimize the active area of the detector to achieve 2% relative precision at 1 kHz. Furthermore, the Total Sample Current (TSC) exhibits a near-linear correlation with luminosity attenuation, enabling real-time luminosity monitoring. 1 Introduction CEPC is a 100 km double-ring collider featuring two interaction points (IPs). It is designed to operate under four center-of-mass energy configurations: Z mode (91 GeV), W mode (160 GeV), Higgs mode (240 GeV), and top quark pair production ( t\bar{t} ) mode (360 GeV). Its primary focus will be the Higgs mode, aiming to precisely measure Higgs boson properties and rigorously test the Standard Model. The target nominal luminosity for the Higgs mode is 5\times 10^{34}\,\text{cm}^{-2}\text{s}^{-1} [ 1 ] . To achieve this desired luminosity target, CEPC intends to implement the crab waist scheme employed by SuperKEKB [ 2 , 3 ] . The CEPC design specifies horizontal and vertical beam sizes of 14 \mu m and 36 nm, respectively, at IP. However, maintaining precise alignment between the positron and electron beams within such a small tolerance is challenging. Thus, real-time beam orbit monitoring and calibration are required. In the vertical direction, the Beam Position Monitor (BPM) serves a crucial function. However, due to the limitations of the BPMs resolution in the horizontal direction, a luminosity-driven dithering orbit feedback system is employed, similar to the approach used by SuperKEKB[ 4 , 5 and references therein]. The luminosity-driven dithering orbit feedback system monitors the luminosity - and is therefore sensitive to the offset of the orbit - by detecting the number of the radiative Bhabha events at the vanishing photon angle. Electrons scattered in the radiative Bhabha process at the IP, referred to as primary electrons, undergo varying degrees of trajectory deflection due to the magnetic fields as they propagate downstream from the IP, depending on their energy. As a result, primary electrons with different energies impact the beam pipe at different positions. This interaction subsequently triggers electromagnetic showers, producing secondary particles. A detector placed outside the beam pipe captures these secondary particles and measures the radiative Bhabha electron count based on the detector’s signal response. Silicon carbide (SiC), especially 4H-SiC, has a stronger radiation tolerance compared to silicon. In previous studies [ 6 , 7 , 8 ] , 4H-SiC has shown excellent performance in various harsh radiation environments. Under photon irradiation with a dose of 5.4 MGy, electron irradiation at 2 MeV with a fluence of 1\times 10^{16}\,\mathrm{electrons/cm^{2}} , neutron irradiation at 1 MeV with a fluence of 8\times 10^{15}\,\mathrm{neutrons/cm^{2}} , and 24 GeV proton irradiation with a fluence of 2.5\times 10^{15}\,\mathrm{protons/cm^{2}} , the 4H-SiC detectors maintained excellent signal response to alpha particles. In addition, the lower leakage current and higher thermal conductivity of 4H-SiC enable it to operate at room temperature, and even up to 500 °C [ 9 ] , without the need for a cooling system, saving space inside the tunnel. Furthermore, the 4H-SiC detector demonstrates exceptional time resolution. Our group reported that the 5 mm \times 5 mm PIN-type detector constructed from 4H-SiC, achieves an outstanding time resolution of 94\pm 1 ps [ 10 ] . In comparison to diamond detectors, SiC detectors are more cost-effective and better suited for large-scale applications. Due to these properties, SiC has been used for \mu -beam monitor for the COMET experiment at J-PARC [ 11 ] . In this study, we utilized RASER [ 12 ] to simulate the interaction between primary electrons and beam pipes, enabling us to determine the distribution of secondary particles. By employing the Shockley-Ramo theorem [ 13 , 14 ] , we simulated the current signals produced by these secondary particles within the detector. The detector geometry was subsequently optimized to achieve a relative precision of 2% under 1 kHz operational conditions, accounting for ground motion (GM) effects [ 15 ] . The resulting detector geometry ensures compatibility with the nominal luminosity specifications of the Higgs operation mode. Additionally, the response of the detector to the decrease in luminosity was also simulated. The simulation results show that the derived Total Sample Current (TSC) values within 1 ms exhibit a good linear relationship with luminosity, demonstrating the suitability for real-time luminosity monitoring. 2 Primary electron tracking To detect a sufficient number of events for achieving the target precision, the monitoring system for the low-energy radiative Bhabha-scattered electrons should preferentially select locations with both higher beam loss rates and concentrated distributions, permitting the implementation of a more compact detector system. Through simulations combining BBBREM [ 16 ] for the radiative Bhabha events at the vanishing photon angle and SAD [ 17 ] for electron trajectory tracking up to 100 meters downstream of the IP, three optimal detector locations were identified for meeting the CEPC spatial constraints [ 18 ] . Three candidate monitoring positions are located at 10 meters, 84 meters, and 90.5 meters downstream of IP, respectively. Position 2, situated in the gap between segments of the first bending magnet, presents substantial spatial constraints and mechanical interference issues, making it unsuitable for deployment. Both Position 1 at 10 meters and Position 3 at 90.5 meters are suitable as monitoring locations. Notably, at Position 1, lost electrons exhibit symmetric distribution on both sides of the beam pipe. Any horizontal offset between the two colliding beams at the IP will cause the beams to mutually focus each other through their attractive electromagnetic interaction, thereby deflecting each beam with respect to its original path. Electrons scattered through the radiative Bhabha process are also subjected to such deflections further disrupting this symmetry. It has been checked that by summing events from identical detectors located on both sides of Position 1, the dependence in event counting rate on horizontal beam offsets at the collision point can be largely mitigated. The basic information regarding the incident primary electrons at these two positions, along with the corresponding detector requirements, is presented in the Table 1 below. Position 1 Position 3 Distance from IP 10 m 90.5 m Average Number detected/collision 3.4(two sides) 3.2(one side) Average Number detected/ms 2830 2670 Expected Relative Precision 2% @1 kHz 2% @1 kHz Average Energy of scattered electron 24 GeV 75.3 GeV Average Hitting Angle 1.7\times 10^{-4} rad 7\times 10^{-4} rad Primary Electron Losses Area 5\times 20\times 2\,~\text{cm}^{2}\ 3\times 15\times 1\,~\text{cm}^{2}\