Digital Quantum Simulation of Spin Transport

Yi-Ting Lee, Bibek Pokharel, Jeffrey Cohn, André Schleife, Arnab Banerjee* · 2025

Read Digital Quantum Simulation of Spin Transport by Yi-Ting Lee, Bibek Pokharel, Jeffrey Cohn, André Schleife, Arnab Banerjee* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-22846.txt.

Introduction

Yi-Ting Lee, Bibek Pokharel, Jeffrey Cohn, André Schleife, and Arnab Banerjee run spin transport tests on a quantum device. Their paper is from two thousand twenty-five. Spin transport matters for spin-based electronics and for spin qubits. Past quantum runs used a spin-spin measure, but a spin-current measure gives more direct facts and costs many more gates.

They use a superconducting transmon device and a direct measure plan that leans on mid-circuit checks. That route dodges the cost of the classic test trick. On a chain model with many sites, they cover three regimes of spread. They recover the known power-law in the middle regime and the loss of steady flow in the slow one.

Catalog record

CREATORYi-Ting Lee, Bibek Pokharel, Jeffrey Cohn, André Schleife, Arnab Banerjee*
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE49 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-22846

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Digital Quantum Simulation of Spin Transport Preprint: APS/123-QED Yi-Ting Lee, Bibek Pokharel, Jeffrey Cohn, André Schleife, Arnab Banerjee* Abstract Understanding transport phenomena in quantum spin systems has long intrigued physicists due to their potential applications in spintronic devices and spin qubits. Here, using a superconducting-qubit-based transmon device, we show that pre-fault-tolerant digital quantum simulation is reliable for studying transport phenomena via spin-current autocorrelation function (ACF). While quantum simulations of the spin-spin ACF have been used to probe spin transport, methods based on the spin-current ACF have yet to be demonstrated due to their high gate cost, despite offering more direct information relevant to the transport properties. Overcoming the resource constraints set by indirect measurement schemes like the Hadamard test, we showcase a direct measurement scheme that utilizes non-unitary operations, in particular mid-circuit measurements, to investigate spin transport for the 40-site 1D XXZ Heisenberg model in the near-ballistic, superdiffusive, and diffusive regimes. We successfully reproduce the expected power-law behavior in the superdiffusive regime and vanishing of the Drude weight in the diffusive regime. Introduction. - Quantum spin systems are an ideal platform to investigate quantum entanglement Latorre et al. 2003 ; Verstraete et al. 2004 ; Latorre and Riera 2009 and explore novel quantum phases. These systems host a variety of emergent quantum phenomena, such as quantum spin liquids Kalmeyer and Laughlin 1989 ; Yunoki and Sorella 2006 ; Depenbrock et al. 2012 , topological magnons McClarty 2022 , and fractionalized excitations Han et al. 2012 ; Dalla Piazza et al. 2015 , and hold potential for applications in quantum sensing Degen et al. 2017 , spintronic devices Wolf et al. 2001 , and spin-based qubits Burkard et al. 2023 , as energy and information can be transferred via the flow of spin angular momentum, known as the spin current. A deeper understanding of how spin degrees of freedom behave and interact will advance both the fundamental physics and practical applications of quantum spin systems. Within quantum spin systems, understanding the transport behavior remains challenging as it involves the dynamics of systems. While prior works have investigated spin transport through spin-spin correlation functions Keenan et al. 2023 ; Shi et al. 2024 ; Kumaran et al. 2025 and time-dependent magnetization Rosenberg et al. 2024 on quantum computers, simulations of the spin-current autocorrelation function (ACF) remain largely unexplored, despite its significant relevance to spintronic devices and thermal transport experiments Hess et al. 2003 ; Sun et al. 2003 ; Jin et al. 2003 ; Czajka et al. 2021 . This is primarily due to the higher gate cost associated with implementing the spin-current operator compared to the spin operator. Although the spin-current ACF has been evaluated using classical methods Herbrych et al. 2011 ; Long et al. 2003 ; Alvarez and Gros 2002 ; Karrasch et al. 2013 ; Steinigeweg et al. 2014 ; Karrasch et al. 2012 ; Karrasch et al. 2014 , these approaches face limitations in handling many-body wave functions due to the memory issues. Here, we propose a simple framework to evaluate spin transport based on spin-current ACF via digital quantum simulation. We illustrate a direct measurement scheme that involves mid-circuit measurements (MCMs) based on Ref. Mitarai and Fujii 2019 , offering greater computational efficiency than the traditional Hadamard test. Compared to the Hadamard test, this direct measurement method does not require ancilla qubits and cross-qubit controlled gates. The number of circuits required to evaluate correlation functions for general N -particle systems scales as \mathcal{O}(N) , in contrast to \mathcal{O}(N^{2}) for the Hadamard test. We also demonstrate the utility of our protocol in evaluating different transport behaviors. In addition, we further outline the general application of our proposed circuit for other correlation functions. In summary, we demonstrate a spin-current evaluation method that is scalable for spin systems of sizes and geometries that are classically hard to deal with. Figure 1: (a) Illustration of spin current and the transport behavior of the spread of excitations, which is also illustrated in Ref. Scheie et al. 2021 . (b) Direct measurement protocol for evaluating the real and imaginary parts of \langle U^{\dagger}WUG\rangle with only the gates without border (from Ref. Mitarai and Fujii 2019 ) and \langle U^{\dagger}_{A}WU_{A}U^{\dagger}_{B}GU_{B}\rangle with all the gates. The unitary operator U_{B} can be either used to transform the basis or encode the second time parameter. The circuits in the box implement the measurement of the spin-current ACF. The real-part evaluation is performed by implementing two different mid-circuit measurements while the imaginary-part evaluation is done by implementing four different unitary gates in circuits. The Trotterized quantum circuit is detailed in Sec. IV . Spin-current ACF. – Consider the spin-1/2 XXZ Heisenberg model as it serves as the framework for studying magnetic interaction and spin dynamics. The Hamiltonian for the 1D chain as expressed by Eq. 1 H=J\sum^{L}_{i=1}\left(S^{X}_{i}S^{X}_{i+1}+S^{Y}_{i}S^{Y}_{i+1}+\Delta S^{Z}_{i}S^{Z}_{i+1}\right) (1) Where S^{X,Y,Z}_{i} are the spin- \frac{1}{2} operators acting on i^{th} spin, L is the length of spin chains, J is the coupling constant, and \Delta is the anisotropy. For convenience, we set J= 1 and consider various values of \Delta . The difference between the local spin currents J_{r} and J_{r-1} is defined via the continuity equation as the time derivative of the spin operator and combining this with Heisenberg’s equation of motion, we have: \frac{dS^{Z}_{r}}{dt}=i[H,S^{Z}_{r}]=-(J_{r}-J_{r-1}) (2) Using this, one can derive the local spin-current operator for a 1D chain as (See Sec. I ): J_{r}=i[S^{Z}_{r},H_{r,r+1}]=J(S^{X}_{r}S^{Y}_{r+1}-S^{Y}_{r}S^{X}_{r+1}) (3) Here, r denotes the spin index, and H_{r,r+1} represents the local Heisenberg Hamiltonian. Instead of measuring the spin current, we aim to measure the spin-current ACF as it plays a central role in characterizing the transport behavior Kubo 1957 . Spin-current ACFs, which are two-time correlations between the spin current operators, are defined as C_{J(t)J}=\sum_{i,j}\langle J_{i}(t)J_{j}\rangle/N (4) Different transport behaviors can be characterized by its frequency-dependent spectrum, decay profile, and Drude weight Bertini et al. 2021 . However, measuring the spin-current ACF is more computationally demanding than the spin current as it includes a time-dependent and a time-independent operator in the observable, which often requires the implementation of the Trotterized circuit acting on only one of the operators via the Hadamard test Somma et al. 2002 . Figure 2: (a) Quantum simulation of real and imaginary parts (inset) of local spin-current ACF \langle J_{i}(t)J_{j}\rangle for a 40-qubit Neel state. The circuit layout on the ibm\_kingston device is shown in the inset. The solid lines are calculated via MPS simulation. The Trotterization time interval is set to 0.2 with \Delta= 2. (b) Demonstration of two-time spin-current ACF C_{J(t_{1})J(t_{2})} . The heat map is generated using MPS simulation, and the quantum simulation is performed along the diagonal slice. The quantum circuit for two-time spin-current ACF is shown in the inset. The Trotterization time interval is set to 0.75 with \Delta= 1.6. The error bar indicates the 95\% confidence intervals estimated by bootstrapping. The results obtained from the ibm\_kingston backend show good agreement with the MPS simulation for both one-time local and two-time spin-current ACF. The deepest circuits for the real- and imaginary-part measurements have depths of 97 and 99, containing 1,882 and 1,880 two-qubit gates, respectively. In the two-time spin-current experiment, the deepest circuit reaches a depth of 91 with 1,491 two-qubit gates.

Read the complete text