Review of the Higgs boson production via vector boson fusion and its decay into bottom quarks in p ​ p pp collisions at 𝒔 = πŸ– , πŸπŸ‘ \boldsymbol{\sqrt{s}=8,13} TeV

Fikriye C I Kaya, Ibrahim Mirza Β· 2025

Read Review of the Higgs boson production via vector boson fusion and its decay into bottom quarks in p ​ p pp collisions at 𝒔 = πŸ– , πŸπŸ‘ \boldsymbol{\sqrt{s}=8,13} TeV by Fikriye C I Kaya, Ibrahim Mirza (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-22765.txt.

Introduction

Fikriye Kaya and Ibrahim Mirza wrote this 2025 arXiv review of a hard-won Higgs boson measurement at the Large Hadron Collider. The Higgs most often decays into a pair of bottom quarks, yet that commonest channel is buried under floods of ordinary jets. The review covers a cleaner production route, where two incoming quarks glance off each other and fuse to make the Higgs.

The authors walk through how the ATLAS and CMS experiments isolate the signal, leaning on decision trees, refined jet reconstruction, and deep-learning flavor tagging. Results from both the earlier 8 TeV run and the 13 TeV data, gathered through 2024, are compared. Everything so far matches the Standard Model, and the measurements pin down how strongly the Higgs couples to bottom quarks, a direct probe of how mass arises. The review closes with prospects for the high-luminosity era and a possible future collider.

Catalog record

CREATORFikriye C I Kaya, Ibrahim Mirza
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE70 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-22765

Browse the full library Β· About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Review of the Higgs boson production via vector boson fusion and its decay into bottom quarks in p ​ p pp collisions at 𝒔 = πŸ– , πŸπŸ‘ \boldsymbol{\sqrt{s}=8,13} TeV Fikriye C I Kaya, Ibrahim Mirza Abstract We present a comprehensive overview of the vector boson fusion production and the following decay of the Higgs boson to two bottom quarks ( H β†’ b ​ b Β― H\!\to\!b\bar{b} ), which dominates the Higgs total width yet remains experimentally challenging because of substantial QCD multijet backgrounds. We overview the use of boosted decision trees, which advance jet reconstruction and flavour tagging by including boosted topologies and deep-learning-based b b -tagging and which improve sensitivity in associated production channels. Special attention is given to ATLAS and CMS selections and results pertaining to the vector boson fusion production of Higgs, decaying in the b ​ b Β― b\bar{b} -channel, from both the 8 TeV and the 13 TeV LHC data-sets conducted with up to 90.8 f ​ b βˆ’ 1 fb^{-1} of Data and published through 2024. Consistent with the Standard Model gauge symmetry S ​ U ​ ( 3 ) C Γ— S ​ U ​ ( 2 ) L Γ— U ​ ( 1 ) Y SU(3)_{C}\times SU(2)_{L}\times U(1)_{Y} predictions, we emphasise how H β†’ b ​ b Β― H\!\to\!b\bar{b} measurements contribute, in conjunction with other production modes and decay channels, to tests of the bottom-quark Yukawa coupling, which is an essential probe of the electroweak symmetry-breaking mechanism. Finally, we discuss how the current precision constrains deviations in the bottom-quark Yukawa coupling, outline ongoing efforts during Run 3, and consider the prospects of forthcoming high-luminosity LHC operation and the proposed Future Circular Collider in further tightening precision tests of the Standard Model and beyond. 1 Introduction The Standard Model (SM) of particle physics is a renormalisable quantum field theory based on the gauge group \mathrm{SU(3)}_{\mathrm{C}}\times\mathrm{SU(2)}_{\mathrm{L}}\times\mathrm{U(1)}_{\mathrm{Y}} [ 1 , 2 , 3 , 4 ] . Electroweak symmetry breaking is instigated by introducing a complex scalar doublet, established by the Higgs field, whose vacuum expectation value breaks the symmetry to \mathrm{SU(3)}_{\mathrm{C}}\times\mathrm{U(1)}_{\text{EM}} [ 5 , 6 , 7 ] . The quantum excitation of this field is a neutral, spin-zero scalar boson, namely the Higgs boson. Fermion masses arise via Yukawa interactions between the Higgs field and the fermions. At the Large Hadron Collider (LHC) the Higgs boson is produced through several mechanisms: gluon–gluon fusion (ggF) ; vector boson fusion (VBF) ; associated production with a vector boson (VH: WH or ZH ) , where V denotes the electroweak vector boson and H denotes the Higgs; production with top/bottom-quark pairs \bigl(t\bar{t}H,\;b\bar{b}H\bigr) ; and production with a single top quark \bigl(tH\bigr) [ 8 ] . The 2012 discovery of the Higgs boson relied on clean final states, notably H\to ZZ^{*}\to 4\ell , where the final state has four leptons ( l ) and H\to\gamma\gamma , where the final state has two photons ( \gamma ) [ 9 , 10 ] . Its dominant decay, H\to b\bar{b} , accounts for about 58\,\% of the total width at m_{H}\approx 125\,\text{GeV} [ 11 , 12 ] , but is experimentally challenging because of large quantum chromodynamics (QCD) multijet backgrounds. Observation of H\to b\bar{b} was first achieved in 2018 via VH production, where the leptonic decay of the vector boson enabled efficient triggering and background suppression [ 13 , 14 ] . The most recent findings regarding the characteristics of the Higgs-boson are summarised in Table 1 . Precise measurement of the bottom-quark Yukawa coupling is critical for the confirmation of the SM. Although the third-generation Yukawa interactions (with t , b , and \tau ) have all been directly established, the fractional uncertainty on the bottom-quark Yukawa coupling y_{b} (equivalently the coupling modifier \kappa_{b} ) remains the largest among \kappa_{t},\kappa_{b},\kappa_{\tau} and is therefore a primary target for improved precision in Run 3 and at the High-Luminosity LHC (HL-LHC) [ 15 , 16 , 17 ] . Recent advances in jet reconstruction and flavour tagging have improved the sensitivity to H\to b\bar{b} . Boosted topologies, large-radius jets, and subjet b -tagging, combined with machine-learning discriminants (e.g. boosted decision trees (BDTs) , neural-network taggers), enhance the rejection of QCD backgrounds [ 18 ] . Results are increasingly reported within the Simplified Template Cross-Section (STXS) framework, which partitions phase space into fiducial regions that minimise theoretical uncertainties [ 19 ] . This paper focuses on the H\to b\bar{b} decay, which has the largest single contribution to the total Higgs width, produced via the colour-singlet VBF process, characterised by two forward, high- p_{T} quark-initiated jets and suppressed hadronic activity in the central region. As VBF is the second-largest Higgs production mode at the LHC, measurements are based on Data collected up to and including LHC Run 2 and the most recent publications through 2024 [ 20 , 21 , 22 , 23 ] . 2 ATLAS \& CMS Experiments The Higgs-to-bottom-quark ( H\to b\bar{b} ) programme at the Large Hadron Collider (LHC) relies on two multi-purpose detectors, the A Toroidal LHC Apparatus (ATLAS) and The Compact Muon Solenoid (CMS) . Both experiments are optimised for heavy-flavour identification, background suppression, and wide kinematic coverage. Each detector employs a multi - layer tracking system around the interaction point. ATLAS determines the primary vertex with topological algorithms; in the 13 TeV VBF analysis the Jet Vertex Tagger (JVT) is also used to suppress jets from pile - up interactions [ 20 , 21 ] . CMS reconstructs all interaction vertices in each event and then selects as primary the one whose associated tracks maximise the scalar sum of squared transverse momenta, \sum p_{\mathrm{T}}^{2} ; the same criterion is quoted in both the 8 TeV and 13 TeV analyses [ 22 , 23 ] . Tracks are bent in solenoidal fields (2–3 % momentum resolution in ATLAS, 1–2 % in CMS), and refined vertex algorithms provide efficient secondary-vertex reconstruction, which is vital for b -tagging [ 24 , 25 , 26 ] . Offline b -jet identification combines several low-level taggers. ATLAS establishes a secondary vertex (SV) b-tagging algorithm, namely SV1 , and the JetFitter algorithm for a topological reconstruction of jets. Impact parameters from these are then fed into either of the two high-level tagging algorithms: The multivariate (MV) algorithm MV2 employs a boosted-decision-tree (BDT) , and the deep learning (DL) algorithm DL1 r utilizes a deep feed-forward neural network [ 27 , 28 , 29 ] . CMS uses the Inclusive Vertex Finder (IVF) algorithm together with two deep neural network (DNN) classifiers for b-tagging: DeepCSV , which utilizes a combined secondary vertex (CSV) , and DeepJet [ 30 , 31 , 32 ] . The legacy triggers still operate a likelihood-based CSV algorithm, where classical multivariate taggers also remain in use for discriminating jets [ 33 , 23 ] . Complementary to CSV, the CMS 8 TeV also employ the track counting high-efficiency (TCHE) for the High-Level Trigger (HLT) on calorimeter-based jets (CaloJets) as well as on particle flow (PF) jets [ 22 ] . Calorimetry in both experiments provides up to 4\pi coverage: ATLAS employs Lead (Pb) with liquid Argon (LAr) modules for the electromagnetic section and steel–scintillator tiles (barrel region)

Read the complete text