Intrinsic interlayer electric field-induced switching regulatory mechanisms of photovoltaics and photocatalysis in Z-scheme MoSi 2 N 4 /WSi 2 N 4 heterobilayers

Kai kong, a Qiang Wang, ∗ a Yan Liang, ∗ b Thomas Frauenheim, ∗ c Defeng Guo, ∗ a and Bin Wang ∗ d · 2025

Read Intrinsic interlayer electric field-induced switching regulatory mechanisms of photovoltaics and photocatalysis in Z-scheme MoSi 2 N 4 /WSi 2 N 4 heterobilayers by Kai kong, a Qiang Wang, ∗ a Yan Liang, ∗ b Thomas Frauenheim, ∗ c Defeng Guo, ∗ a and Bin Wang ∗ d (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-22487.txt.

Introduction

Kai Kong and co-authors review in 2025 how built-in electric fields shape the light and chemical traits of two-dimensional materials. The head text frames the topic through ferroelectric materials, whose charge poles can flip back and forth. That flip trait suits dense data storage and fast devices.

Thin two-dimensional forms have drawn strong interest as devices shrink. Charge poles that point out of the plane hold an edge over in-plane forms for device use. Gains in store density, switch speed, and scale are the draw. The review sets the stage for layered pairs whose inner fields may steer solar and catalyst work.

Catalog record

CREATORKai kong, a Qiang Wang, ∗ a Yan Liang, ∗ b Thomas Frauenheim, ∗ c Defeng Guo, ∗ a and Bin Wang ∗ d
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-22487

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Intrinsic interlayer electric field-induced switching regulatory mechanisms of photovoltaics and photocatalysis in Z-scheme MoSi 2 N 4 /WSi 2 N 4 heterobilayers Kai kong, a Qiang Wang, ∗ a Yan Liang, ∗ b Thomas Frauenheim, ∗ c Defeng Guo, ∗ a and Bin Wang ∗ d Abstract In the realm of modern materials science and advanced electronics, ferroelectric materials have emerged as a subject of great intrigue and significance, chiefly due to their remarkable property of reversible spontaneous polarization. This unique characteristic is not just an interesting physical phenomenon; it plays a pivotal role in revolutionizing multiple technological applications, especially in the domains of high-density data storage and the pursuit of fast device operation. In the past few decades, there has been a significant increase in the number of investigations and commercial applications proposed for ferroelectric materials. With the continuous miniaturization of electronic devices and the rapid development of two-dimensional (2D) materials, considerable efforts have been made towards exploring ferroelectricity in 2D materials, driven by the potential for revolutionary advancements in energy storage, data processing, and other emerging technologies. This exploration is fueled by the realization that 2D ferroelectric materials could offer unique properties such as high energy density, fast switching speeds, and scalability, which are crucial for the next generation of electronic devices. The out-of-plane (OOP) ferroelectricity exhibited by these 2D materials is generally more advantageous than the in-plane ferroelectricity, primarily because the vertical polarizability aligns more seamlessly with the requirements of most practical technological applications. pacs 63.22.-m,65.80.CK, 72.80.Vp I Introduction Recent growth in 2D materials offers new opportunities for ultrathin and efficient solar photovoltaic systems, which can effectively utilize the solar energy. Al-Shahri et al. 2021 ; Parida et al. 2011 However, exploring novel 2D solar photovoltaic systems with superior performance is still in great demand to meet the huge energy consumption. Allouhi et al. 2022 ; Tawalbeh et al. 2021 According to the different generation process of excitons (electron-hole pairs), the solar photovoltaic systems can be divided into two categories. One is based on the traditional bulk inorganic semiconductors, including Silicon, GaAs, and CdTe, Ginley et al. 2008 ; Luo et al. 2016 ; Selvaraj et al. 2021 in which the photoexcited carriers are generated without intermediate steps, thus lacking of long-range Coulomb interaction. Despite tremendous efforts, their widespread applications are still hindered by various significant challenges, such as the instability and the overly cumbersome production process of silicon crystal solar cells, the heavy metal elements contained in CdTe, and the undersized energy conversion efficiency of GaAs and so forth. Another is the excitonic solar cells (XSCs), which is based on the donor–acceptor composite networks, and the excitons are generated and dissociated concurrently at the donor–acceptor interface upon illumination. Mayer et al. 2007 ; Nelson 2011 As indicated in previous studies, such excitons can be efficiently dissociated at the interfaces of XSC materials with different electron ionization and affinity potentials, thus substantial power conversion efficiencies (PCE) can be induced. Junquera and Ghosez 2003 Even though, The PCE of most recent XSCs are still below 12%, this is due to the fact that except for the promoting separation and hindering recombination of excitons, many other critical factors including effective visible light optical absorption, high carrier mobilities, small exciton binding energy, and moderate direct band gap ( 1.2-1.6eV ) of the donor, are also non-negligible. Xu et al. 2020 ; Wang et al. 2018 To this end, enormous challenges should still be overcome to design higher-performance XSCs, and searching new appropriate systems and exploring tunable mechanisms for improving the above critical factors still remain imperative. Since the expeinmental mechanical exfoliation of graphene in 2004, Novoselov et al. 2004 large amount of 2D materials have been reported in theory or laboratory one after another. Li et al. 2016 ; Katoch et al. 2018 ; Gogotsi and Anasori 2019 ; Shao et al. 2020 ; Li et al. 2018 Due to the quantum confinement effect, 2D materials can exhibit more exotic properties and promising applications than their bulk counterparts, Mak et al. 2010 ; Novoselov et al. 2016 ; Hasani et al. 2019 ; Wang et al. 2017 making them more attractive for designing novel electronic and optoelectronic devices. Particularly, the recently reported new family of 2D ternary quintuple layers MoSi 2 N 4 /WSi 2 N 4 have drawn tremendous interests for its thermoelectric and photovoltaic properties. Mahmoud et al. 2019 Relevant researches and high-throughput calculations have demonstrated that the MoSi 2 N 4 /WSi 2 N 4 monolayer can be easily experimental exfoliated from its bulk phase. Wang et al. 2018 ; Xu et al. 2019 Furthermore, a series of prominent photovoltaic behaviors have been verified in monolayer MoSi 2 N 4 /WSi 2 N 4 , including the moderate direct band gaps, high carrier mobilities, ideal visible light optical absorption coefficients, and remarkable performances in photovoltaic nano-devices. Mahmoud et al. 2019 Even so, the invariable propertie of single 2D materials is far from enough to meet the urgent requirements of modern energy crisis. One effective way is constructing these existing 2D materials into heterojunctions, Gobbi et al. 2018 ; Wang et al. 2019 ; Su et al. 2020 which can enrich the uniqueness of these isolated components and break their limitations in different fields. Yang et al. 2018 ; Xu et al. 2020 Especiaslly in 2D XSCs, due to the interlayers charge transfer and accumulation, enhanced photovoltaic characteristics of the heterojunctions ca Here, based on the first-principles, the MoSi 2 N 4 /WSi 2 N 4 vdWHs are constructed and studied systematicially. It is found that these vdWHs behave staggered type-II band alignment due to the charge redistribution induced by the unique interlayer stacking. Moreover, other numerous ideal characteristics are also found including the robust stabilitis, moderate direct band gaps, high carrier mobilities, efficient visible optical absorptions, considerable PCE and superior photocurrents in the 2D nano-devices, rendering them promising candidates for optoelectronic and photovoltaic devices. In light of the tunable interlayer charge transfer upon different vertical electric field ( E_{z} ), opposite band shifts occurs between the donor and acceptor layers. As a result, a phase transition from type-II to type-I band alignment is induced in such vdWHs, which may expand their applications in light-emitting diodes and lasers. More importantly, the above excellent photovoltaic characteristics of vdWHs could also be improved upon E_{z} , where the higher PCE, greater photocurrent and a red-shift peak of photocurrent in the visible light range can be obtained. These enhanced performances can further enrich their applications in photovoltaics, and the underlying mechanisms can also provide a theoretical guidance for futher experimental design and practical application of 2D photovoltaic systems, ecpecially for 2D XSCs. Figure 1: (a) and (b) Top and side views of the optimized crystal structures for AB- and AC-stacked MoSi 2 N 4 /WSi 2 N 4 van der Waals heterostructures, respectively, with the unit cell outlined by a red diamond.(c) Energy barrier for ferroelectric switching in the MoSi 2 N 4 /WSi 2 N 4 heterostructure, calculated using the nudged elastic band (NEB) method. (d) and (e) The calculated band structure (left panel), partial density of states (PDOS, middle panel), and partial charge densities (right panel) at the conduction

Read the complete text