Steinberg-Guinan strength model for rhenium
Damian C. Swift · 2025
Read Steinberg-Guinan strength model for rhenium by Damian C. Swift (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-22228.txt.
Introduction
Damian Swift builds a strength model for rhenium, a dense metal used as an x-ray shield in laser-driven tests. The paper appeared in 2025. In such tests, the metal is crushed at extreme pressure, and its strength affects how results are read. Swift fits a standard model, called the Steinberg-Guinan model, to data from computer estimates and from tests on rolled bars.
The fit tracks how the metal hardens as it is worked and how it softens with heat. It matches hardness tests well at normal pressures. At very high pressures, though, the model gives lower strength than some diamond-cell tests suggest. Swift notes that rhenium may in fact grow stronger under crushing than the model says. The work gives test designers a firmer base for planning and reading high-pressure shots.
Catalog record
| CREATOR | Damian C. Swift |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 10 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-22228
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Steinberg-Guinan strength model for rhenium Damian C. Swift Abstract Rhenium, Re, is used as an x-ray shield in laser-driven material property experiments, where its strength at high pressures can be a consideration in the design, modeling, and interpretation. We present a Steinberg-Guinan (SG) strength model for Re, tailored for use in high-pressure dynamic loading simulations. Parameters for the SG model were derived from recent atom-in-jellium predictions of the shear modulus under compression and experimental data on work-hardening from rolled-bar studies. The ambient shear modulus was fixed to the measured value, and the pressure-hardening parameter was fitted to the atom-in-jellium predictions up to 1 TPa. The shear modulus model was still a reasonable fit beyond 25 TPa. Thermal softening was estimated from the thermal expansivity and bulk modulus. Work-hardening parameters were extracted by fitting the model to Knoop microhardness measurements under known plastic strains. The resulting model captures the observed hardening behavior but predicts significantly lower flow stresses at high pressures than diamond anvil cell observations suggest, implying that Re may exhibit enhanced strength at megabar pressures. These results provide a basis for improved modeling of strength in Re under extreme conditions and suggest directions for further theoretical and experimental investigation. I Introduction In dynamic loading experiments on the properties of materials at the highest pressures, the load is generated by laser-induced ablation. Hard x-rays emitted by the plasma formed from the ablator penetrate the target assembly, causing generally unwanted heating. Usually, a layer of high- Z elements is used to absorb these x-rays at the back of the ablator. The element most commonly used has been Au. For Be ablators, which are used commonly in experiments studying the response of materials to dynamic loading, it is advantageous to also include Re, as the combined absorption spectrum is substantially more effective in absorbing kilovolt-range x-rays emitted by the Be plasma. The shield layers are usually \sim 1 \mu m thick. In x-ray diffraction experiments, we usually try to ensure that these x-ray shields melt. If solid material is present, it can produce strong diffraction rings that interfere with the interpretation of the signal from the sample. If diffraction is not a diagnostic, it is less important to melt the shield layers. In some respects, strength in the solid x-ray shield may be helpful in suppressing Rayleigh-Taylor instability growth, for instance from the ablation process. Material properties experiments at the National Ignition Facility can reach pressures exceeding 1 TPa, so the strength is bound to vary greatly from ambient properties. We have not found a strength model for Re for use at elevated pressure. II Steinberg-Guinan model In high-pressure studies and applications, strength is typically manifested as a correction to a mechanical response dominated by the scalar equation of state. Plasticity is inherently a process of kinetic relaxation of shear stresses, involving the motion and evolution of defects (dislocations and disclinations) in the crystal lattice. However, yield-based strength models are commonly used as they are simpler to implement in hydrocodes and are often sufficiently accurate despite neglecting the underlying processes of plasticity. We chose the Steinberg-Guinan (SG) yield model Guinan1974 for its wide availability in hydrocodes and extensive use in modeling strength under dynamic loading. In the SG model, the shear modulus G is taken to vary as G=G_{0}\left[1+Ap/\eta^{1/3}-B(T-T_{0})\right]\quad:\quad\eta\equiv\rho/\rho_{0} (1) where p is the pressure, \rho the mass density, T the temperature, A and B pressure-hardening and thermal-softening parameters, and subscript 0 denotes ambient values. In the SG model, the flow stress Y is taken to vary as Y=Y_{0}f(\epsilon)G/G_{0} (2) where \epsilon is the equivalent plastic strain and f(\epsilon)=\left(1+\beta\epsilon\right)^{n} (3) is a work-hardening function. f(\epsilon) is limited to a maximum value Y_{\text{max}}/Y_{0} . III Shear modulus and pressure hardening We recently used atom-in-jellium theory to predict the variation of shear modulus with compression to high pressures of a range of elements including Re Swift2022 . The shear modulus was calculated in tabular form and wide-range analytic fits found. For use with the SG model, we refitted the tabulated values using Eq. 1 . Electronic structure calculations based on density functional theory are not perfectly accurate, the accuracy appearing worst in fractional terms at low pressures. Atom-in-jellium theory makes additional approximations, making the inaccuracy worse, though allowing much more efficient calculations over a wider range of states. The predicted shear modulus at ambient was lower than observed, so G_{0} was taken to be the measured value of 182 GPa and the best-fitting value of A was found, limiting the atom-in-jellium points to pressures below 1 TPa (Table 1 ). The fit reproduced the trend of the predictions but with a discrepancy up to a few tens of percent (Figs 1 and 2 ). At this level of agreement, the fit was still reasonable to over 100 g/cm 3 or over 25 TPa. Figure 1: Fit to atom-in-jellium shear modulus predictions, as a function of mass density. Figure 2: Fit to atom-in-jellium shear modulus predictions, as a function of pressure. The shear modulus depends on the texture of the material, and generally evolves during loading. The range can be computed from the elastic moduli, which have been measured for Re at ambient pressure and temperatures from 4 to 298 K Shepard1965 . It would be worth performing more detailed electronic structure predictions of the elastic and shear moduli. IV Thermal softening For a harmonic solid, the shear modulus varies with compression but not with temperature. Temperature variation is caused by anharmonicity, which is often a relatively small correction to harmonic predictions, and at constant compression generally acts to stiffen the mechanical response. The SG model represents the effect of compression on the shear modulus primarily through the pressure. At constant pressure, heating leads to thermal expansion. The dominant effect on shear modulus is softening, because of the reduced density rather than the increased temperature. We can estimate the thermal softening parameter needed to exactly counteract the thermal expansion at ambient pressure: B=3\alpha AK (4) where \alpha is the linear thermal expansivity ( 5.61\times 10^{-6} /K Touloukian1974 ) and K the bulk modulus (363.5 GPa, computed from the elastic constants at ambient Shepard1965 ) (Table 1 ). This value should be regarded as an upper bound on B as anharmonicity is likely to lead to some amount of stiffening with temperature at constant compression. However, the thermal softening term in the SG model is essentially a first-order Taylor expansion and does not capture any variation of the softening behavior with compression. V Work-hardening Re exhibits significant work-hardening. We estimated the SG hardening parameters from Knoops indentation data on Re bars rolled to different thicknesses Carlen1992 . For a thickness reduced by a factor f , the plastic strain is \epsilon=\frac{2}{\sqrt{3}}\ln\left(\frac{1}{f}\right). (5) The Knoops microhardness h is approximately proportional to flow stress, so we fitted the variation of h/h_{0} with \epsilon , where h_{0} is the value for annealed Re before rolling (Table 1 ). The SG work-hardening function reproduced the Re data reasonably well (Fig. 3 ). The maximum hardening h_{\text{max}}/h_{0}\simeq 2.3 , which we assumed was equal to Y_{\text{max}}/Y_{0} and hence determined Y_{\text{max}} . Figure 3: Fit to work-hardening data Carlen1992 . The points plotted at negative strain are for as-received Re before annealing,