Boosting VBF Reconstruction at Muon Colliders

Carlos Henrique de Lima · 2025

Read Boosting VBF Reconstruction at Muon Colliders by Carlos Henrique de Lima (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-22108.txt.

Introduction

Carlos Henrique de Lima proposes a trick for seeing the forward muons that future muon colliders would otherwise miss. In vector boson fusion, the scattered muons fly nearly along the beam, where shielding against beam-induced background blocks today's detectors. Yet catching those muons is how physicists tell whether a W or a Z boson drove the event. Lima's idea is to run the two beams at unequal energies, so the whole collision is boosted and one forward muon tips into the detector's view.

He tests the scheme on Higgs production through vector boson fusion at 3 and 10 teraelectronvolt colliders. Even modest beam asymmetry recovered much of the physics reach lost to the blind forward region. The author presents asymmetric running as a practical way to regain process discrimination when detector coverage is limited by background shielding.

Catalog record

CREATORCarlos Henrique de Lima
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-22108

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Boosting VBF Reconstruction at Muon Colliders Carlos Henrique de Lima Abstract Forward muon detection at high-energy muon colliders is crucial for resolving the underlying electroweak process. This work proposes a novel strategy using asymmetric beam energies to boost one of the forward muons into the detector acceptance, enhancing the ability to distinguish between W W - and Z Z -initiated vector boson fusion processes. We demonstrate the capabilities of such an asymmetric collider using VBF Higgs production at 3 and 10 TeV muon colliders with modest boost asymmetries. Asymmetric beam configurations can partially recover the physics potential lost in forward regions when detector coverage is limited. I Introduction Muon colliders are currently under extensive study as a promising candidate for the next-generation high-energy particle physics experiment Delahaye et al. 2019 ; Accettura et al. 2023 ; Adolphsen et al. 2022 ; Narain et al. 2022 ; Asai et al. 2023 ; Al Ali et al. 2022 ; Black et al. 2024 . They offer a unique opportunity to explore the multi-TeV energy scale, where vector boson fusion and scattering increasingly dominate, allowing the precise study of electroweak physics. At high energies, electroweak processes, particularly those mediated by vector boson fusion (VBF) Costantini et al. 2020 , exhibit significantly forward muons or neutrinos. The ability to identify and reconstruct these forward muons is crucial for disentangling the W - and Z -initiated processes, thereby enhancing the sensitivity to both Standard Model and beyond-the-Standard Model signatures. Several studies have demonstrated that detecting forward muons significantly improves sensitivity to a broad class of signatures Ruhdorfer et al. 2025 ; Bandyopadhyay and Parashar 2024 ; Ruhdorfer et al. 2020 ; Ruhdorfer et al. 2023 ; Li et al. 2024 ; Forslund and Meade 2022 ; Forslund and Meade 2024 ; Bandyopadhyay et al. 2024 ; Barducci and Dondarini 2024 ; Frigerio and Vignaroli 2025 ; Li et al. 2025 , including making invisible final states accessible. Detecting forward muons is highly challenging in current muon collider designs. Most of the limitation comes from the shielding necessary to handle the beam-induced background (BIB) at these colliders Accettura et al. 2024 . In-flight decay of the muon results in a secondary particle cloud that propagates alongside the beam. The current shield designs Bartosik et al. 2024 ; Bell et al. 2025 ; Calzolari et al. 2023 use conical absorbers in the interaction region that limit the angle acceptances to around 10 degrees from the beam line. Further development of how to effectively suppress the beam-induced background can increase the angular acceptance Ally et al. 2022 ; Bartosik et al. 2019 . Still, realistically, it is very challenging for the angular acceptance to be similar to that in electron or proton colliders. In this letter, we motivate an alternative experimental design, utilizing asymmetric beam energies to facilitate the measurement of these forward muons. The asymmetric energy boosts the angle of the particle produced in the collision. The asymmetry means that the forward muons traveling in the opposite direction of the boost can now be inside the detector. While the muons traveling in the direction of the boost get further forward, meaning that, under this design, invisible searches are still not optimal. Nevertheless, detecting one muon is enough Han et al. 2021a to significantly improve the sensitivity for new physics. Figure 1: Schematic illustration of the impact of an asymmetric beam configuration ( \beta=0.8 ) on particle angles in the lab frame. A forward muon pair (brown arrows) initially produced at 5^{\circ} relative to the beam axis is Lorentz-boosted such that one muon (blue arrow) enters the detector region. Figure 2: Left: Normalized angular distribution at \sqrt{s}=3 TeV of the muon moving in the opposite direction of the boost. Right: Normalized angular distribution at \sqrt{s}=3 TeV of the b -quark from the Higgs decay ( H\rightarrow b\bar{b} ). The distribution for \bar{b} is the same. The different curves show \beta=0,0.5,0.8,0.9 . The detector acceptance of 10 degrees from the beamline is shown in dashed black, where most of the muons get lost in the symmetric collider configuration. Asymmetric configurations (which are also asymmetric in lepton type) were explored in Lu et al. 2021 and considered for one of the designs of \mu TRISTAN Hamada et al. 2022 . These configurations have a strong physics case to probe lepton number violation Kriewald et al. 2025 ; de Lima et al. 2025 ; Das et al. 2024 ; Calibbi et al. 2024 ; Lichtenstein et al. 2023 . In this work, we focus on asymmetric muon beams; nevertheless, the results for VBF topologies can be easily translated to asymmetric lepton designs. While several approaches have focused on improving shielding geometries or extending detector coverage, these rely on substantial progress in their development. The strategy proposed in this work is minimal in terms of the detector design, relying instead on kinematic manipulation. Eventually, at multi-TeV collisions, the muons generated in VBF can be so forward that their distribution peaks close to the beam pipe, and no shielding and detector improvement can access this region. In contrast, an asymmetric energy configuration can help to tackle this regime. The effect of a beam asymmetry using current detector design parameters can be seen in Figure 1 . We demonstrate this idea using VBF Higgs production at a 3 TeV and 10 TeV center-of-mass energy collider with moderate asymmetries with boost \beta=\frac{E_{1}-E_{2}}{E_{1}+E_{2}}=[0.5,\,0.9] . We show that as the boost increases, the sensitivity for the Z -initiated process also increases. This enhances the ability to extract Higgs–gauge boson couplings compared to the symmetric scenario. Even modest asymmetries can improve the discovery reach on electroweak coupled physics without the need for significant progress in detector and shielding design. Beyond VBF Higgs production, asymmetric collisions offer a framework to recover physics in otherwise inaccessible regions. II Asymmetric Muon Collider Figure 3: Combined 95\% C.L from the VBF Higgs process for the \Delta\kappa_{W} vs \Delta\kappa_{Z} for 3 TeV and 10 TeV asymmetric colliders with boosts \beta=0.5,0.8,0.9 . In dashed, the reach for a symmetric configuration with twice the energy of the most energetic beam is shown. The reach for a symmetric collider with the same center of mass energy always has weaker disentangling power, and is similar to the symmetric configuration shown for \beta=0.5 . In some cases, the symmetric higher energy collider can have slightly better reach for \Delta\kappa_{W} , but it is always worse in separating the W and Z initiated process. This is explicitly seen in the bottom right plot, where the higher energy symmetric collider has no reach for the exclusive 1 \mu analysis. An asymmetric muon collider consists of two beams with unequal energies, introducing a net boost between the center-of-mass (COM) frame and the laboratory frame. The lab-frame angle \theta_{\text{lab}} of outgoing particles is related to the COM angle \theta by \cos\theta_{\rm lab}=\frac{\cos\theta+\beta}{1+\beta\cos\theta}\,. (1) where \beta is the boost velocity (in units of the speed of light). This transformation compresses forward particles moving aligned with the more energetic beam and expands the acceptance of backward-going particles. It is worth noting that this effect does not apply to the BIB, since they are not interacting with the other beam. The tradeoff is that final-state

Read the complete text