Modelling hydrogen storage in metal hydrides
Francesc Font 1, Attila Husar 1, Tim Myers 2, Maria Aguareles 3, Esther Barrabés 3 · 2025
Read Modelling hydrogen storage in metal hydrides by Francesc Font 1, Attila Husar 1, Tim Myers 2, Maria Aguareles 3, Esther Barrabés 3 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-22083.txt.
Introduction
Font and co-authors develop in 2025 a one dimensional model of hydrogen loading into a metal hydride tank. Such tanks store hydrogen in a porous metal bed for clean energy use. The model tracks gas density and pressure, tank temperature, gas speed, and the share of metal turned to hydride.
Scaling the equations shows the system can be reduced, with density and metal share split from the temperature equation. The reduced model is solved numerically. Letting the reaction rate vary by place in the tank explains odd temperature gradients seen in experiments. The work aids design of hydride storage that loads evenly.
Catalog record
| CREATOR | Francesc Font 1, Attila Husar 1, Tim Myers 2, Maria Aguareles 3, Esther Barrabés 3 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 19 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-22083
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Modelling hydrogen storage in metal hydrides Francesc Font 1, Attila Husar 1, Tim Myers 2, Maria Aguareles 3, Esther Barrabés 3 Abstract We develop a one-dimensional mathematical model for the loading process of hydrogen in a metal hydride tank. The model describes the evolution of the density and pressure of the hydrogen gas, the temperature of the tank, the averaged velocity of the gas through the porous metal structure, and the transformed fraction of metal into a metal hydride. The non-dimensionalisation of the model indicates a possible reduction of the system of equations and also shows that the density and the transformed metal fraction may be decoupled from the temperature equation. The reduced model is solved numerically. Introducing a spatial dependence into the kinetic reaction constant allows to explain unexpected temperature gradients observed in experiments. † † tocauthor: Francesc Font, Attila Husar, Tim Myers, Maria Aguareles, Esther Barrabés † † institute: Department of Fluid Mechanics, Universitat Politècnica de Catalunya - BarcelonaTech, Av. Eduard Maristany, 16, Edifici A, Barcelona 08019, Spain , and Centre de Recerca Matemàtica, Campus de Bellaterra, Edifici C, Bellaterra 08193, Barcelona, Spain and Department of Computer Science, Applied Mathematics and Statistics, Universitat de Girona, Campus de Montilivi, Girona 17071, Catalunya, Spain 1 Introduction Motivated by the global warming crisis and the active role of policy makers to reduce CO 2 emissions, the general interest in hydrogen as a potential new green energy vector has increased remarkably in the last decade. In line with this, research towards safe and efficient methods of storing hydrogen has also increased. Hydrogen storage in metal hydrides (MH) presents several advantages in terms of safety and storage capacity with respect to classical methods such as compressed or liquefied hydrogen storage Sch2001 . However, the thermal management of MH tanks is challenging due to the large quantities of heat released during hydrogen loading. High equilibrium pressures and temperatures for the metal to metal hydride reaction are also a challenge for its use in applications operating around room temperature. Thus, more research needs to be done to make MH tanks viable for their implementation in practical applications. In this contribution, we formulate and solve a one-dimensional mathematical model describing the hydrogen loading process in a MH tank. We base our model on experiments performed with the lab-scale hydrogen storage canister Hydrostick PRO from the company Horizon Educational. Typically, the metal alloys used in MH tanks are of type AB2 or AB5 (i.e., alloys formed by 1 atom of component A and 2 or 5 atoms of component B, respectively). The Hydrostick PRO is based in a AB5 metal alloy but the particular composition of the metal is unknown (proprietary information). In these experiments, hydrogen is input at a constant mass flow rate and the temperature evolution of the canister is recorded with a FLIR C5 thermal camera (Fig. 1 , left). The images are later postprocessed with Matlab and converted into data points for the temperature along the canister length (see right image in Fig. 1 ). The mathematical model describing the hydrogen loading process in these experiments is presented in Section 2 . The model is then solved numerically. The results are discussed in Section 3 and, finally, the main conclusions are presented in Section 4 . Figure 1: Left: Thermal image of the lab-scale metal hydride hydrogen storage canister Hydrostick PRO during hydrogen loading. Right: Temperature profiles at different times during the first 8 min of the loading process obtained from the thermal camera images. The bottom/top profiles correspond to the initial/final times. 2 One-dimensional mathematical model We use the hydrogen storage experiment shown in Figure 1 as a reference set-up to develop our model. The size and the material properties of the MH canister are described in Table 1 . Since the particular metal hydride in the Hydrostick PRO is unknown, we choose values for the material properties which are similar to those found in the literature for AB5 alloys Sandrock99 . Hydrogen is pumped through the top of the tank at a constant mass flow rate and travels from top to bottom through the pore space of the metallic porous bed. When hydrogen contacts the boundaries of the porous media the hydrogenation reaction begins; the hydrogen is absorbed by the metal which transforms into a metal hydride. The hydrogenation reaction liberates large quantities of heat, rapidly increasing the temperature of the tank. To formulate a one-dimensional model we consider a cylindrical tank of radius r and length L . We assume radial symmetry and consider the radial component of the velocity field to be negligible. Thus, conservation of mass in the gas phase leads to \varepsilon\frac{\partial\rho}{\partial t}+\varepsilon\frac{\partial}{\partial z}\left(\rho u\right)=-\rho_{m}\,{\omega}\,(1-\varepsilon)\frac{\partial\alpha}{\partial t}\,, (1) where \rho is the density of hydrogen, u the average interstitial velocity in the axial direction, \varepsilon (non-dimensional) the porosity, \rho_{m} the density of the metal hydride, \omega the maximum mass fraction of hydrogen in the metal and \alpha the fraction of metal transformed into a metal hydride. The transformation of metal into a metal hydride, follows the kinetic law \frac{\partial\alpha}{\partial t}=k\left(\frac{p-p_{\textrm{eq}}}{p_{\textrm{eq}}}\right)(1-\alpha)\,, (2) where k is the reaction constant and p_{\textrm{eq}} the equilibrium pressure at which the reaction occurs. Describing the kinetics of hydrogen absorption into the metal via the linear driving force ( 2 ) is a standard approach in the literature Chaise2010 ; Bho2017 . Therefore, we also take the linear driving force approach in the current work. Note that in the most general case, k depends on temperature via an Arrhenius law and p_{\textrm{eq}} depends on temperature via a van’t Hoff relation Chaise2010 ; Lutz2019 ; Chaise2009 . As a first approximation, we consider k and p_{\textrm{eq}} constant. The governing equation for the evolution of the temperature in the tank is \begin{split}(1-\varepsilon)\rho_{m}c_{p,m}\frac{\partial T}{\partial t}&+\varepsilon\rho c_{p,g}\frac{\partial(Tu)}{\partial z}=\lambda\frac{\partial^{2}T}{\partial z^{2}}\\ &+\frac{2h_{a}}{r}(T_{0}-T)+\frac{\rho_{m}\omega(1-\varepsilon)\Delta H}{M}\frac{\partial\alpha}{\partial t}\,,\end{split} (3) where T is the averaged temperature over the cross sections of the tank, \Delta H the enthalpy of the reaction, M (kg/mol) the molar mass of hydrogen, \lambda an effective thermal conductivity, h_{a} a heat transfer coefficient between the tank and the surrounding air, r the radius of the tank, T_{0} the ambient room temperature, and c_{p,g} , c_{p,m} the specific heats of hydrogen and metal, respectively. Note in writing equation ( 3 ) we have assumed thermal equilibrium between the hydrogen and the metal and have used the approximation \varepsilon\rho c_{p,g}+(1-\varepsilon)\rho_{m}c_{p,m}\approx(1-\varepsilon)\rho_{m}c_{p,m} to obtain the first term of ( 3 ). The average velocity of the gas in the axial direction of the tank is described by Darcy’s law \frac{\partial p}{\partial z}=-\beta u (4) where \beta=\mu\varepsilon/K , with \mu the viscosity of hydrogen and K the permeability of the porous media. Finally, pressure, density and temperature, are related via the ideal gas law p=\rho R^{\prime}T (5) where R^{\prime}=R/M with R the universal ideal gas constant. We note that the mathematical model ( 1 )-( 5 ) holds strong similarities with those describing contaminant removal in adsorption columns Myers2020a ; Myers2020b ; Sips . They consist of radially averaged 1D models of a gas (or liquid) phase flowing through a porous media, with mass transfer between the gas and the porous media modelled via a linear driving force or more elaborate forms. Hydrogen enters the tank at