Safety Analysis for Distributed Coupled-Cavity Laser based Wireless Power Transfer

Mingqing Liu, Member, IEEE, Hao Deng, Member, IEEE, Iman Tavakkolnia, Member, IEEE, · 2025

Read Safety Analysis for Distributed Coupled-Cavity Laser based Wireless Power Transfer by Mingqing Liu, Member, IEEE, Hao Deng, Member, IEEE, Iman Tavakkolnia, Member, IEEE, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-21891.txt.

Introduction

Mingqing Liu and co-authors present a 2025 paper on the safety of sending power through the air with laser cavities. Such systems could charge devices and feed sensors without wires, and could also carry data and position signals. A split cavity design widens the working angle and should improve safety, but the claim needs proof.

The team built a model of how strong the beam is where skin, eyes, or small objects might intrude. An eye safety check used a model of the human head to find risky angles and distances. Light tracing backed the model's results. Three case studies cover skin, eyes, and object intrusion.

Catalog record

CREATORMingqing Liu, Member, IEEE, Hao Deng, Member, IEEE, Iman Tavakkolnia, Member, IEEE,
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE51 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-21891

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Safety Analysis for Distributed Coupled-Cavity Laser based Wireless Power Transfer Thanks: This work is supported in part by the Engineering and Physical Sciences Research Council (EPSRC) under grant EP/X040569/1 ‘Future Communications Hub in All-Spectrum Connectivity’. Mingqing Liu and Bin He are with the College of Electronics and Information Engineering, Tongji University, Shanghai, China (email: { clare, hebin } @tongji.edu.cn). Mingqing Liu was working with LiFi Research and Development Centre, Electrical Engineering Division, University of Cambridge, Cambridge, UK. Hao Deng and Qingwen Liu are with the School of Computer Science and Technology, Tongji University, Shanghai, People’s Republic of China (e-mail: { denghao1984,qliu } @tongji.edu.cn). Iman Tavakkolnia and Harald Haas are working with LiFi Research and Development Centre, Electrical Engineering Division, University of Cambridge, Cambridge, UK (email: { it360, huh21 } @cam.ac.uk). Mingqing Liu, Member, IEEE, Hao Deng, Member, IEEE, Iman Tavakkolnia, Member, IEEE, Abstract Intracavity laser-based systems are emerging as key enablers for next-generation wireless communications, positioning, and wireless power transfer (WPT). Distributed coupled-cavity laser (DCCL) systems, as a representative configuration, have been proposed to expand the field of view (FoV) and enhance safety. This paper investigates the safety assessment of DCCL-WPT systems through three case studies: skin safety, eye safety, and small-object intrusion sensitivity. First, we establish a safety analysis model to quantify irradiation levels on intruding objects in the beam path, which simulates intracavity beam propagation using diffraction modeling and gain-loss dynamics under case-specific boundary conditions. Next, we formulate an eye safety evaluation tailored for DCCL-WPT systems using a human head model to identify potential exposure angles and distances. Ray tracing confirms that intracavity beams are not focused onto the retina, making cornea exposure the primary consideration (irradiance is below 0.1 0.1 W/cm 2 ). Numerical results demonstrate that DCCL-WPT achieves: i) over 600 600 mW charging power under skin-safe conditions at 5 5 m distance ( 100 100 mW over 16 ∘ 16^{\circ} FoV), and nearly 50 50 % lower irradiance on intruding objects compared to single-cavity systems; ii) 150 150 mW charging power under eye-safe conditions with 650 650 mW 1064 1064 nm output beam power, far beyond the typical ∼ 10 \sim 10 mW eye-safe threshold; iii) high sensitivity to small-object intrusion, enabling hazard mitigation. These findings underscore the practicality of DCCL-WPT systems for mobile, long-distance, and safe energy transfer, and lay the groundwork for future safety-aware optimizations in real-world deployments. I Introduction Laser technologies offer compelling advantages for wireless power transfer (WPT), including high directivity, broad modulation bandwidth, and immunity to electromagnetic interference, making them especially suitable for long-distance and electromagnetically constrained environments [ 1 , 2 , 3 ] . Although laser-based communication, typically operating in the near-infrared band, has achieved impressive data rates and high directionality [ 4 , 5 ] , extending its application to WPT remains constrained by stringent eye safety requirements and mobility limitations that restrict deliverable power [ 6 ] . To address this, intracavity laser architectures have emerged with self-alignment and inherent safety properties, and the recently proposed distributed coupled-cavity laser (DCCL) design further expands alignment tolerance and improves safety [ 7 ] . However, the eye safety of the DCCL has not yet been systematically investigated. This paper fills that gap by proposing a comprehensive safety analysis framework for DCCL-based WPT (DCCL-WPT) systems, covering skin exposure, eye safety, and sensitivity to small-object intrusions. According to laser safety standards such as IEC 60825-1-2014, laser radiation hazards are primarily categorized into photochemical effects (dominant below 780 nm) and thermal effects (dominant above 780 nm) [ 8 ] . For infrared lasers, such as the 1064 nm or 980 nm wavelength range that have been experimentally demonstrated in intracavity systems due to their high electro-optical conversion efficiency [ 9 , 10 , 11 ] , the main safety concern is thermal damage due to high power density. In this context, the maximum permissible exposure (MPE) serves as a key metric in evaluating human safety, especially for skin and eyes. Skin exposure to laser radiation is typically considered safe up to 1 W/cm 2 [ 12 ] . However, the eye is far more vulnerable due to its lens focusing effect, which can concentrate laser energy onto the retina [ 13 ] . As a result, the MPE for eye exposure is set much lower, typically at 5 mW/cm 2 . Although wavelengths beyond 1400 nm are not focused onto the retina and are considered relatively safer, near-infrared lasers at 1064 nm, still present significant eye safety risks [ 6 ] , and thus must be carefully assessed when designing user-centric intracavity systems . Prior research on intracavity laser systems has focused on distributed single-cavity lasers (DSCL), in which the transmitter comprises a gain medium and a retroreflector (RR), while the receiver contains a second RR to complete one resonant cavity [ 14 , 15 ] . Owing to their dual-RR cavity design and the dynamic interplay between gain and loss, DSCL can automatically establish resonant links even as there is an angle between transceivers [ 16 , 17 ] . When an object intrudes into the cavity (i.e., free-space transmission path), the increased loss immediately disrupts the transmission, ensuring an inherent safety mechanism. Still, if intruding objects such as human body parts, inadvertently enter the intracavity path, the irradiance they receive during the brief transient before beam termination remains a safety concern. Following this idea, a theoretical model has demonstrated that the irradiance on the surface of an intruding object in DSCL, throughout the entire process until the beam is cut off, is only 1/10 of that in traditional laser systems. The results indicate that DSCL can meet skin-safety requirements with 2.5 W output optical power under static transceiver conditions [ 18 ] . However, the tight coupling between gain medium and free-space path in DSCL leads to high intracavity power densities, posing challenges for compliance with stricter safety standards such as eye safety. Moreover, DSCL architectures face intrinsic trade-offs between system gain and FOV. These limitations motivate growing interest in DCCL designs [ 9 , 7 , 19 ] . Integrating photon-to-electricity converters such as photodetectors (PDs) or photovoltaic (PV) cells can extend the functionality of DCCL toward WPT or communication applications. In DCCL-WPT, the gain medium and two internal RRs are fully integrated at the transmitter, forming a main cavity. Another RR at the transmitter and one at the receiver jointly form a separate free-space resonant cavity, which is optically coupled to the main cavity. Meanwhile, beam power is output from the receiver side and converted by PV. DCCL separates the gain mechanism from both the FoV constraints and the need for high free-space power density, aiming to maintain real-time disruption upon object intrusion while simultaneously reducing the maximum surface irradiance and expanding the FoV. A mobility analysis model has demonstrated that DCCL can expand the FoV from \pm 10^{\circ} in DSCL to \pm 40^{\circ} [ 7 ] . As for safety, an optical semiconductor amplifier-based prototype has shown that the resonating power in free space reaches 17.2 mW under alignment and drops by a factor of four when obstructed, suggesting the potential for eye-safe operation [ 20 ] . Inspired by DCCL, protective beam designs have also

Read the complete text