On the Feasibility of SCL-Band Transmission over G.654.E-Compliant Long-Haul Fibre Links
Jiaqian Yang (1), Eric Sillekens (1), Ronit Sohanpal (1), Mingming Tan (2), Dini Pratiwi (2), Henrique Buglia (3), Romulo Aparecido (1), John D. Downie (4), Sergejs Makovejs (4), Lidia Galdino (4), Wladek Forysiak (2,5), Polina Bayvel (1), Robert I. Killey (1) · 2025
Read On the Feasibility of SCL-Band Transmission over G.654.E-Compliant Long-Haul Fibre Links by Jiaqian Yang (1), Eric Sillekens (1), Ronit Sohanpal (1), Mingming Tan (2), Dini Pratiwi (2), Henrique Buglia (3), Romulo Aparecido (1), John D. Downie (4), Sergejs Makovejs (4), Lidia Galdino (4), Wladek Forysiak (2,5), Polina Bayvel (1), Robert I. Killey (1) (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-21865.txt.
Introduction
Jiaqian Yang and co-authors push fiber capacity in a 2025 optics paper. They sent signals across three light bands at once over long haul fiber built to a low loss standard. That fiber's cutoff wavelength sits at 1520 nanometers, which should block part of the range. Despite that, the team reached a rate of 100.8 terabits per second over 1,552 kilometers.
The fiber's very low loss and weak nonlinearity carried the day. With simple lumped amplifiers, its reach matched links that need costlier distributed boosting on a rival fiber standard. A first of its kind result, the test suggests existing premium fiber can host wider band service. Carriers gain a path to more capacity without new cable.
Catalog record
| CREATOR | Jiaqian Yang (1), Eric Sillekens (1), Ronit Sohanpal (1), Mingming Tan (2), Dini Pratiwi (2), Henrique Buglia (3), Romulo Aparecido (1), John D. Downie (4), Sergejs Makovejs (4), Lidia Galdino (4), Wladek Forysiak (2,5), Polina Bayvel (1), Robert I. Killey (1) |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 12 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-21865
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
On the Feasibility of SCL-Band Transmission over G.654.E-Compliant Long-Haul Fibre Links Jiaqian Yang (1), Eric Sillekens (1), Ronit Sohanpal (1), Mingming Tan (2), Dini Pratiwi (2), Henrique Buglia (3), Romulo Aparecido (1), John D. Downie (4), Sergejs Makovejs (4), Lidia Galdino (4), Wladek Forysiak (2,5), Polina Bayvel (1), Robert I. Killey (1) Abstract 1 Introduction In recent years, major breakthroughs have been achieved in ultra-wideband (UWB) wavelength-division multiplexing (WDM) fibre transmission employing three or more optical bands, as summarised in Fig. 1 . However, the use of UWB technology in long-haul transmission remains challenging, as separate amplifiers are required for each band, and signal power profile shaping and optimisation become increasingly complex, due to inter-channel stimulated Raman scattering (ISRS) and the use of Raman amplification. Distributed Raman amplification, as an approach to complement lumped doped fibre amplifiers (DFAs), has been widely used in long-haul UWB transmission [ 1 , 2 , 3 , 4 ] to compensate for fibre loss and ISRS. Other studies have employed DFA-only approaches [ 5 ] , or utilised wavelength conversion techniques to amplify signals in the shorter or longer wavelength bands [ 6 , 7 , 8 ] . These complex amplification schemes become essential, as most transmission experiments have been carried out over G.652.D-compliant standard single-mode fibre, which has an effective area of approximately 80 µm 2 and attenuation of 0.2 dB/km at 1550 nm. The low water-absorption peak of such fibre allows Raman pump lasers operating in the E-band to be deployed, providing distributed gain to offset power loss due to ISRS. However, new optical fibres have been developed, such as G.654.E-compliant fibres, featuring ultra-low-loss characteristics, with reduced attenuation of 0.148 dB/km at 1550 nm and a larger effective area (125 µm 2 ), though with a maximum cutoff wavelength shifted to \sim 1520 nm. These fibres are well-suited for high-data-rate, long-haul transmission [ 9 ] , and have been demonstrated as suitable for S-band transmission, both theoretically [ 10 ] and experimentally [ 11 ] , even when signal wavelengths fall below the cutoff. Although its lower nonlinearity (and hence lower Raman gain coefficient) and the presence of a higher water absorption peak may reduce the efficiency of Raman amplification in G.654.E fibre, studies have shown that Raman pumping can still provide performance gains [ 12 , 13 ] . Several prior works using G.654.E fibre have been reported [ 6 , 14 , 15 ] , though they feature either limited transmission distances of no more than 150 km or signals at wavelengths above the cutoff wavelength. 70 100 130 160 100 Pb/s \cdot km 150 Pb/s \cdot km 200 Pb/s \cdot km [ 2 ] [ 6 ] [ 6 ] [ 7 ] [ 5 ] [ 4 ] [ 8 ] SCL Throughput (Tb/s) SCL CLU SCLU SCLUX 800 1000 1500 2000 2400 4 5 6 7 This work [ 6 ] [ 6 ] [ 7 ] [ 5 ] [ 4 ] [ 2 ] [ 8 ] Distance (km) SE (b/s/Hz) Figure 1 : Transmission distance, throughput, and spectral efficiency (SE) of recent long-haul transmission demonstrations using three or more optical bands. Solid markers: decoded net rate; open markers: rate from GMI. In this work, we investigate the feasibility of SCL-band long-haul transmission over G.654.E-compliant Corning ® Vascade ® EX2500 fibre and achieve the highest SE in SCL-band long-haul transmission. Negligible penalty due to multipath interference (MPI) was observed for signals below the cutoff wavelength. With the benefit of lower attenuation, the G.654.E fibre was found to enable similar throughput to G.652.D fibre-based transmission, but without the need for distributed Raman amplification. Furthermore, despite the higher water absorption peak of the G.654.E fibre, the use of distributed Raman amplification with pump wavelengths in the E-band, provided improved transmission performance. The results show the potential of this type of fibre for long-haul UWB optical transmission. 2 Experimental setup 116 GHz 112 GBaud CUT 10 dB/div. Figure 2 : Experimental setup for S+C+L-band long-haul transmission over 18 \times 86.2 km G.654.E-compliant fibre. Inset: spectrum of channel under test (CUT). The experiment carried out (shown in Fig. 2 ) consisted of an external-cavity laser (ECL) and a dual-polarisation in-phase quadrature (DP-IQ) thin film lithium niobate (TFLN) modulator with a 3-dB bandwidth of \sim 80 GHz, driven by an arbitrary waveform generator (AWG) to generate a 112 GBd geometrically-shaped (GS) [ 16 ] 16-QAM or 64-QAM test channel. A fourth-order Volterra digital pre-distortion filter was applied to compensate for the nonlinear response of the digital-to-analogue converter (DAC), driver amplifier and modulator, achieving a maximum back-to-back signal-to-noise ratio (SNR) of \sim 19 dB across all three bands. Co-propagating WDM channels were emulated using spectrally-shaped amplified spontaneous emission (ASE) noise, generated by a wideband ASE source and shaped by WaveShapers ® operating as wavelength selective switches (WSSs). The combined WDM signal was transmitted through a recirculating fibre loop for 18 re-circulations, totalling a distance of 1552 km. The loop comprised a pair of acousto-optic modulators (AOMs) for switching between loading and re-circulating states, a polarisation scrambler (PS), three gain blocks (each of which included an S-band thulium-doped fibre amplifier (TDFA), a low-gain C-band EDFA and a low-gain L-band EDFA), a 86.2 km G.654.E-compliant fibre span, three backward Raman pumps, and WSSs and variable optical attenuators (VOAs) for power balancing. The UWB receiver consisted of a bandpass filter, a pre-amplifier, a 90-degree hybrid, and a 256 GSa/s Keysight UXR oscilloscope. Offline digital signal processing (DSP) [ 17 ] and adaptive rate decoding [ 18 , 5 ] was performed. 3 Fibre and Raman pump characterisation G.654.E G.652.D 1365 0.28 0.27 1385 0.76 0.27 1405 0.39 0.25 1425 0.25 0.24 At pump wavelengths 1480 1520 1560 1600 0.14 0.18 0.22 0.26 0.148 dB/km @1550 nm Wavelength (nm) Att. (dB/km) G.654.E G.652.D Figure 3 : Fibre attenuation at signal and Raman pump wavelengths. The Vascade EX2500 fibre had a span length of 86.2 km, and a low-water-peak G.652.D fibre of the same span length was used for comparison. Throughout the remainder of this paper, we refer to the Vascade EX2500 fibre and the low-water-peak fibre as G.654.E and G.652.D, respectively. The measured attenuation of the two fibres is shown in Fig. 3 , with G.654.E exhibiting \sim 0.04 dB/km lower attenuation across the signal wavelengths, but higher loss at the pump wavelengths in the E-band due to the presence of the water absorption peak. The total fibre span losses at 1550 nm, including splicing losses, were 13.0 dB for G.654.E and 16.5 dB for G.652.D. Three lasers were used as Raman pumps in the G.654.E fibre, at wavelengths of 1365 nm, 1385 nm, 1405 nm with maximum output powers of \sim 500 mW each. For the G.652.D fibre, an additional pump at 1425 nm was employed to enhance the Raman gain. The pump powers and signal launch power per band were optimised for both fibre types using a simplified ISRS GN model [ 19 ] to maximise throughput. Wavelength-dependent gains or losses were replaced with average values per band in the model to simplify optimisation and system design. Pump powers were set to maximum for G.654.E fibre due to reduced Raman efficiency [