Anyonic Josephson junctions: Dynamical and ground-state properties
Jessica John Britto · 2025
Read Anyonic Josephson junctions: Dynamical and ground-state properties by Jessica John Britto (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-20044.txt.
Introduction
Jessica John Britto studies a special kind of Josephson junction, a link between two superfluid phases split by a thin barrier. Her 2025 paper builds the link from particles that act like anyons, which swap places in an unusual way. The setup varies either a phase term or the strength of an on-site force to shape the ground state of the system.
Working with exact and large-scale number methods, Britto maps how the ground state changes across setups. She then tracks motion over time to find which setups give a steady Josephson effect. One clear result stands out. Flow can keep going with only a starting phase gap and no outside push. The work shows how odd particle rules can drive a familiar quantum effect.
Catalog record
| CREATOR | Jessica John Britto |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-20044
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Anyonic Josephson junctions: Dynamical and ground-state properties Jessica John Britto Abstract Bosons with density-dependent hopping on a one dimensional lattice have been shown to emulate anyonic particles with fractional exchange statistics. Leveraging this, we construct a Josephson junction setup, where an insulating barrier in the form of a Mott-insulator is sandwiched between two superfluid phases. This is obtained by spatially varying either the statistical phase or the strength of the on-site interaction potential on which the ground state of the system depends. Utilizing numerical methods such as exact diagonalization and density renormalization group theory, the ground state properties of this setup are investigated to understand the Josephson effect in a strongly correlated regime. The dynamical properties of this model for different configurations of this model are analyzed to find the configurations that can produce the Josephson effect. Furthermore, it is observed that continuous particle flow over time is achievable in this proposed model solely by creating an initial phase difference without any external biasing. Keywords : Anyons, Hubbard model, Josephson junction, Josephson effect, non-equilibrium quantum dynamics, anyonic Josephson junction \ioptwocol 1 Introduction Recent experiments have realized anyons in 1D optical lattices using conditional-hopping bosons via assisted Raman tunneling [ 1 , 2 ] , with demonstrations including anyonic random walks [ 3 ] . Motivated by these studies, we study the Josephson effect in a strongly correlated many-body regime. We propose a multi-site anyonic Josephson junction model, designed based on the ground-state properties of the 1D anyonic Hubbard model, to characterize this phenomenon. We analyze ground-state and dynamical properties of the multi-site anyonic Josephson junction using observable quantities. First, we briefly describe basic differences among anyons, bosons and fermions, followed by 1D anyonic Hubbard model in Section 1.2 . In Section 2 , the ground-state properties of this model for a system size of 64 lattice sites, are analyzed. In Section 3 , the dynamics of the model under different configurations are studied starting from the two-site model [ 4 ] , up to six lattice sites (and 64 lattice sites), to identify configurations showing Josephson effect observed in conventional Josephson junctions. Furthermore, the analysis of the dynamical properties shows that by creating phase difference between two parts of the given system, results in continuous current flow without any external biasing. Figure 1 : Anyonic Josephson junction general setup 1.1 Anyons, Bosons and Fermions In three dimensions or higher, quantum particles only follow Fermi-Dirac and Bose-Einstein statistics [ 5 ] . Anyons are quasi-particles that are found only in <=2 dimensions [ 5 ] , although their properties can be modeled in arbitrary dimensions as formulated by Haldane [ 4 , 1 ] . Anyons interpolate between the particle statistics of bosons and fermions. Table 1 summarizes some of the key differences of bosons, fermions and anyons. Property Bosons Fermions Anyons Spin Integer (e.g., 0, 1, 2) Half-integer (e.g., 1/2, 3/2) Fractional Wavefunction under exchange Symmetric Anti-symmetric e^{i\theta} Exchange Phase \theta \theta=0 \theta=\pi 0<\theta<\pi Table 1 : Comparison of bosons, fermions & anyons As given in [ 1 ] , anyonic operators can be mapped to bosonic operators and the mapping is given in 1 where b_{i}^{\dagger}(a_{i}^{\dagger}) , b_{i}(a_{i}) are the bosonic (anyonic) creation and annihilation operators, n_{i}=b_{i}^{\dagger}b_{i}=a_{i}^{\dagger}a_{i} , and \theta is the statistical phase. a_{j}=b_{j}\,\exp\left(i\theta\sum_{i=1}^{j-1}n_{i}\right) (1) This mapping is non-local as it depends on a string of n operators of other lattice sites to construct an anyonic annihilation operator for a lattice site j . \begin{split}a_{j}a^{\dagger}_{k}-e^{-i\theta sgn(j-k)}a_{k}^{\dagger}a_{j}&=\delta_{jk}\\ a_{j}a_{k}&=e^{i\theta sgn(j-k)}a_{k}a_{j}\end{split} (2) From the commutation rules for anyons, anyons with \theta=\pi , we obtain pseudofermions which means two such particles act as fermions off-site and as bosons on-site. This is because for the on-site case, we have (j-k)=0 which results in the bosonic commutation rules irrespective of the value of \theta . 1.2 Anyonic Hubbard model The 1D anyonic Hubbard model has been studied previously in [ 1 , 2 ] . In this section, key findings of the 1D anyonic Hubbard model are summarized, when it is expressed in terms of bosonic operators using the mapping given in 1 . We study this model specifically for unit filling case (i.e, N_{sites}=N_{particles} ) with fixed total number of particles. H_{AHM}=-J\sum_{i}a_{i}^{\dagger}a_{i+1}+\frac{U}{2}\sum_{i}n_{i}\cdot(n_{i}-1) (3) H_{AHM}^{b}=-J\sum_{j}^{N_{sites}}\left(b_{j}^{\dagger}b_{j+1}e^{i\theta n_{j}}+\text{h.c}\right)+\frac{U}{2}\sum_{j}^{N_{sites}}n_{j}(n_{j}-1) (4) For a constant value of \frac{U}{J} , with increase in \theta from zero to \pi , the system tends to show more prominent properties of the Mott-insulating phase. Therefore, for \theta=\pi , the model seems to act as a Mott-insulator as given in [ 1 ] . The first-excitation gap for this model validates this statement as shown in 2 since with increase in \theta from zero to \pi , the critical value of J ( J_{crit} ) also increases. Therefore, J_{crit} for the statistical phase value \pi , it is expected to take an infinite value based on the plot given in 2 . For a constant U=1 , the critical value of the hopping amplitude for the superfluid-Mott-insulating transition J_{crit} increases with increase in \theta . The initial decrease in the plot 2 , before crossing J_{crit} can be understood by doing Taylor’s series expansion on the excitation gap in terms of small J values compared to U . For a unit-filling case in the Mott-insulating phase, the ground-state consists of one particle per site. Therefore, this gap should be equal to U=1 as it is the minimum energy required to move a particle from one site and put it with another to create the minimum excitation. This reasoning holds for all values of \theta for J=0 . Beyond J_{crit} , the ground-state of this system tends to show superfluid properties where the particles should experience no on-site interactions ideally. In this case, we can think of this model in the tight-binding limit except this model will have an additional phase for \theta\neq 0 as given in 4 . Since this is a finite system of size 64, the excitation gap is finite, however, the gap will vanish for large system size \rightarrow\infty . Note that even in the absence of on-site interaction potential, the phase term e^{i\theta n_{j}} associated with the hopping term in eq. 4 induces complex many-body interactions. These interactions driven by the statistical phase e^{i\theta n_{j}} , provide a key motivation for studying the anyonic Josephson junction as a platform for exotic quantum dynamics. Figure 2 : First excitation gap as a function of hopping amplitude J for different values of statistical phase \theta 2 Anyonic Josephson junctions In this section, the ground-state properties of a multi-site anyonic Josephson junction are studied for a unit-filling model where N_{sites}=N_{particles} . This model is studied under different configurations which is achieved by first setting \theta=0 and varying U across the three regions to create superfluid and Mott-insulating phases as shown in 1 . Secondly, the same can be obtained by setting U to a constant while varying \theta\in\{0,\pi\} . The main reason behind this is to create a very strong superfluid or Mott-insulating phase so that this creates a simple scenario to study the Josephson effect in a strongly-correlated regime 1 1 1 Additionally, in these cases, we considered only \theta=\{0,\pi\} as during our numerical simulations, we noticed that MPS based DMRG algorithms