Dynamics of current-induced switching in the quantum anomalous Hall effect
Alina Rupp, Daniel Rosenbach, Torsten Röper, Dominik Hoborka, Alexey A. Taskin, Yoichi Ando, Erwann Bocquillon · 2025
Read Dynamics of current-induced switching in the quantum anomalous Hall effect by Alina Rupp, Daniel Rosenbach, Torsten Röper, Dominik Hoborka, Alexey A. Taskin, Yoichi Ando, Erwann Bocquillon (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-19665.txt.
Introduction
Alina Rupp and co-authors watch, in real time, how an electric pulse flips the magnetization of a topological insulator, in a paper from 2025. In the quantum anomalous Hall state, current runs along edges with no loss. The edge direction follows the internal magnetization, which a strong bias current can reverse.
Time-resolved tests showed the flip is a slow, heat-driven process. Joule heating during the pulse warms the sample and activates the reversal. The pattern of the switching fits a disordered magnetic landscape inside the material. Knowing that heat does the work points to ways to steer edge states locally and on purpose, a step toward devices built on this effect.
Catalog record
| CREATOR | Alina Rupp, Daniel Rosenbach, Torsten Röper, Dominik Hoborka, Alexey A. Taskin, Yoichi Ando, Erwann Bocquillon |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-19665
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Dynamics of current-induced switching in the quantum anomalous Hall effect Preprint: APS/123-QED Alina Rupp, Daniel Rosenbach, Torsten Röper, Dominik Hoborka, Alexey A. Taskin, Yoichi Ando, Erwann Bocquillon Abstract Ferromagnetic topological insulators in the quantum anomalous Hall (QAH) regime host chiral, dissipationless edge states whose propagation direction is determined by the internal magnetization. Under suitable conditions, a strong electrical bias can induce magnetization reversal, and thus flip the propagation direction. In this work, we perform time-resolved measurements to investigate the switching dynamics. Our results reveal characteristics consistent with a disordered magnetic landscape and demonstrate that the reversal process is thermally activated, driven by Joule heating during the current pulse. The understanding of the magnetization dynamics in QAH systems opens pathways for local, controlled manipulation of chiral edge states via thermal effects. I Introduction The quantum anomalous Hall (QAH) effect in ferromagnetic topological insulators arises from a single chiral topological edge state, whose propagation direction is set by the out-of-plane magnetization of the sample. This results in vanishing longitudinal resistance R_{xx}\simeq 0 and a quantized Hall resistance R_{xy}=\pm\frac{h}{e^{2}} without the need for an external magnetic field Chang et al. 2013 ; Chang et al. 2015 ; Yu et al. 2010 . Owing to these properties, QAH materials are interesting playgrounds for quantum transport in edge plasmons Martinez et al. 2024 ; Röper et al. 2024 or for induced topological superconductivity Uday et al. 2024 . They offer a promising platform for quantum metrology Bestwick et al. 2015 ; Götz et al. 2018 ; Fox et al. 2018 ; Fijalkowski et al. 2024 , for the development of non-reciprocal microwave components Viola and DiVincenzo 2014 ; Mahoney et al. 2017 or flying Majorana states Beenakker et al. 2019 . Crucially, understanding, controlling, and reversibly switching the magnetization in these ferromagnetic systems would enable directional control of the edge state, facilitating path reconfiguration Yasuda et al. 2017 and the creation of interfaces at magnetic domain walls Rosen et al. 2017 . In this context, current-induced magnetization switching has been reported in two separate studies, though under remarkably different conditions – one compatible with spin-orbit torque mechanisms Yuan et al. 2024 and the other not Zimmermann et al. 2024 . In this work, we employ time-resolved excitation pulses to reveal the dynamics of current-induced magnetization switching in thin films of V-doped (Bi,Sb) 2 Te 3 (V-BST) in the quantum anomalous Hall regime. Thus, we access the switching time t_{\rm sw} necessary for the magnetization to reverse under excitation, and clarify the underlying switching mechanism. In our devices, the observed behavior is inconsistent with spin-transfer torques. Instead, by modeling heat transport within our films, we demonstrate that magnetization reversal results from thermally-activated switching, originating from Joule heating. Specifically, in the presence of a small perpendicular magnetic field opposing the magnetization of the sample, current pulses sufficiently raise the temperature to exponentially decrease the switching time t_{\rm sw} , and trigger the reversal of multiple independent domains, therefore progressively leading to a full reversal of the magnetization. Figure 1 : Experimental setup: a) Microscope image of Sample A. The mesa is colored in red. Parts of it are covered by a gate, not functional in this device. The ohmic contacts are colored in light yellow. b) Schematic of the measurement setup. A pulse generator ( Rigol DG5102 ) delivers short pulses of duration \tau between 25\text{\,}\mathrm{ns} and 100\text{\,}\mathrm{\SIUnitSymbolMicro s} applied to the sample via a coaxial line. Lock-in amplifiers measure the longitudinal and transverse (Hall) resistance of the sample in between the pulsed excitations. II Experimental setup Figure 2 : Dynamics of the resistances: a) (resp. b)) Evolution of the resistance R_{xy} (resp. R_{xx} ) measured after an increasing number i of pulses, for an amplitude V=$4\text{\,}\mathrm{V}$ for different pulse widths \tau (shown in different shades of green, legend visible in c)), measured on Sample A. c) Dynamics of R_{xy} as a function of the time t=N\tau spent under excitation, showing a very good overlap between the curves obtained for different pulse widths \tau . A fit of the dynamics of R_{xy}(t) with a stretched exponential function is plotted as a red solid line, for t_{\rm sw}=$2.8\text{\,}\mathrm{\SIUnitSymbolMicro s}$ and \beta=0.8 . In this work, several devices were measured, all fabricated using 8\text{\,}\mathrm{nm} thick films of V-BST grown by molecular beam epitaxy, capped with a 4\text{\,}\mathrm{nm} layer of \rm Al_{2}O_{3} . In this article, we focus on this article in two main devices, Sample A and B. A microscope image of Sample A is shown in Fig. 1 a. All transport measurements were performed 20\text{\,}\mathrm{mK} , at the base temperature of the refrigerator. Ohmic contacts are used for measuring longitudinal and transverse Hall resistances (resp. R_{xx} and R_{xy} ) in different configurations as allowed by the sample geometry. We use standard lock-in techniques at low frequency ( 7\text{\,}\mathrm{Hz} ) and low amplitude ( 1\text{\,}\mathrm{nA} ) (see Fig. 1 b). Each device exhibits a Hall resistance within approximately 10\text{\,}\mathrm{\%} of the quantized value R_{xy}=h/e^{2} , and longitudinal resistance values that range between R_{xx}\simeq$300\text{\,}\mathrm{\SIUnitSymbolOhm}$ and 600\text{\,}\mathrm{\SIUnitSymbolOhm} . In addition, one of the ohmic contacts is connected to a high-frequency coaxial line with low attenuation (maximum -18\text{\,}\mathrm{dB} ). Via this coaxial line, we send pulses of large amplitude up to V\simeq$10\text{\,}\mathrm{V}$ (at the generator output) and of temporal widths \tau ranging between 25\text{\,}\mathrm{ns} and 100\text{\,}\mathrm{\SIUnitSymbolMicro s} . The corresponding currents, in excess of 10\text{\,}\mathrm{\SIUnitSymbolMicro A} , are similar to those used in Ref. Zimmermann et al. 2024 . III Experimental observations on current-induced switching Current-induced switching monitored from the magneto-resistance – We start by describing the measurement sequences and their results. In such a sequence, the sample is first initialized at a large external field ( \mu_{0}H_{\rm init}=$2\text{\,}\mathrm{T}$ ) to a fully magnetized quantum anomalous Hall state, in which R_{xy}\simeq R_{K} and R_{xx}<$1\text{\,}\mathrm{k\SIUnitSymbolOhm}$ , before setting the magnetic field to a value H such that -H_{c}<H<0 (where \mu_{0}H_{c}\simeq$1\text{\,}\mathrm{T}$ is the coercive field), opposing the initial magnetization M_{\rm init}>0 . We repeat pulses of amplitude V and duration \tau and measure the evolution of R_{xx},R_{xy} in between each two pulses to observe the progressive reversal of the magnetization. The sequence ends after N pulses. The measurements of R_{xy} and R_{xx} are shown in Figs. 2 a and 2 b for various pulse durations. As the number of applied pulses i\leq N increases, the Hall resistance R_{xy} is observed to progressively decrease, until it saturates at the value R_{xy}\simeq-R_{K} expected for a film fully magnetized in the opposite direction. In parallel, R_{xx} shows a strong increase for small i , before decreasing to R_{xx}\simeq$3\text{\,}\mathrm{k\SIUnitSymbolOhm}$ approaching the value observed in the initial state. This indicates that, during the reversal of the magnetization, the film transits through the magnetically unpolarized state in which quantum anomalous Hall edge states wrap around the magnetic domains and dissipation occurs. As in this example, the longitudinal resistance R_{xx} is often observed to converge towards final values higher than the initial one. We discuss possible origins for this difference in the Supplementary Material sup . Magnetization dynamics – We now discuss the dynamics of the reversal of the Hall resistance, and indirectly of the magnetization. We first rescale each curve by defining the time coordinate t indicating the total cumulated