Machine Learning Based Efficiency Calculator (MaLBEC) for Nuclear Fusion Diagnostics
Kimberley Lennon, Chantal Shand, Gemma Wilson, Robin Smith · 2025
Read Machine Learning Based Efficiency Calculator (MaLBEC) for Nuclear Fusion Diagnostics by Kimberley Lennon, Chantal Shand, Gemma Wilson, Robin Smith (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-19425.txt.
Introduction
Lennon, Shand, Wilson, and Smith present MaLBEC, a machine learning tool that speeds a key step in fusion research. Scientists place foils in a neutron flux and count the rays they later emit to infer fusion power. That count needs an efficiency value, normally found by slow simulation. Their 2025 paper offers a learned shortcut.
The tool takes just four inputs and returns the efficiency value for a sample. On a fusion test sample, its values landed within about five percent of the slow method on average. Computing time fell by almost all of the original cost. When used in the full activity sum, results stayed within three percent of the standard path.
Catalog record
| CREATOR | Kimberley Lennon, Chantal Shand, Gemma Wilson, Robin Smith |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 21 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-19425
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Machine Learning Based Efficiency Calculator (MaLBEC) for Nuclear Fusion Diagnostics Kimberley Lennon, Chantal Shand, Gemma Wilson, Robin Smith Abstract Diagnostics are critical for commercial and research fusion machines, since measuring and understanding plasma features is important to sustaining fusion reactions. The neutron flux (and therefore fusion power) can be indirectly calculated using neutron activation analyses, where potentially large numbers of activation foils are placed in the neutron flux, and delayed gammas from key reactions are measured via gamma spectrometry. In gamma spectrometry, absolute efficiency forms part of the activity calculation, and equals to the ratio of the total number of photons detected to the number emitted by a radioactive sample. Hence, it is imperative that they are calculated efficiently and accurately. This paper presents a novel digital efficiency calculation algorithm, the Machine Learning Based Efficiency Calculator (MaLBEC), that uses state-of-the-art supervised machine learning techniques to calculate efficiency values of a given sample, from only four inputs. In this paper, the performance of the MaLBEC is demonstrated with a fusion sample and compares the values to a traditional efficiency calculation method, Monte Carlo N-Particle (MCNP). The efficiencies from the MaLBEC were within an average 5% of the ones produced by MCNP, but with an exceptional reduction in computation time of 99.96%. When the efficiency values from both methods were used in the activity calculation, the MaLBEC was within 3% of the MCNP results. keywords Machine Learning, Gamma spectrometry, Fusion, Diagnostics, Neural Networks, Nuclear 1 Introduction Gamma spectrometry is a method in experimental nuclear physics used for identifying and quantifying photon radiation, by measuring \gamma rays emitted from activated materials and naturally occurring background radiation. In fusion, gamma spectrometry is used in waste characterisation, materials research for future fusion machines, plasma diagnostics (e.g. indirectly calculating the neutron flux, and therefore fusion power, via neutron activation analysis MAST_U_indiumfoil ; Lees_paper ), and other areas. High purity germanium (HPGe) detectors are often selected to measure low intensity or complex \gamma ray signatures due to their excellent \sim keV spectral resolution MLCSA_KL and will be the focus of this paper. Once a spectrum has been collected with an HPGe detector, the activity, which is the number of counts per second observed by the detector, is derived from the energy spectrum, and is calculated for each photopeak as a=\frac{A_{n}}{\varepsilon\times t\times b_{r}}, (1) where a is activity (Bq), A_{n} is net peak area, \varepsilon is the absolute efficiency, t is the live counting time, and b_{r} is the branching ratio. The absolute efficiency ( \varepsilon ) is the ratio of the total number of photons detected to the number emitted by a radioactive sample, and is dependent on the sample geometry and density, detector geometry, photon energy, photon interactions, and the sample-to-detector position practical_g_spec . The efficiency values form a key part of the activity calculation, hence it is imperative that they are calculated effectively and accurately. Figure 1 shows an experimental set-up of a fusion-relevant steel sample and the spectrum collected. This sample and spectrum are used in section 3 to provide validation of this work. Figure 1 : a) Experimental measurement set-up, including the Trans-SPEC-DX-100T HPGe detector and a steel sample (2 cm radius, 13.5 cm height, and a density of 6.89 \mathrm{g/cm^{3}} positioned 30 cm from the detector). Radiation emitted from the sample was measured for 800 seconds. To demonstrate the importance of the efficiency calculation, the pink (light) wavy line demonstrates a photon that reaches the detector and the black (dark) wavy line is one that is not incident on the detector and so will not be seen. b) Spectrum from the set-up shown in a), with the key photopeaks, manganese-54 and cobalt-60, labelled and filled in pink and the rest of the spectrum outlined in black Traditional methods for calculating efficiency values are effective, but often require expensive software, difficult to obtain licences, extensive training and expertise, significant time to create or run models, reference sources in the same geometry as each new sample, and/or restrictive software that is difficult to use in tandem with laboratory automation tools. This paper presents a new method for absolute efficiency calculations, the machine learning based efficiency calculator (MaLBEC), which calculates the absolute efficiencies for 11 pre-determined photon energies for any cylindrical sample based on just four inputs. 2 Methods 2.1 Data collection and preprocessing The data used in selecting the machine learning model and training the MaLBEC were simulated via Monte Carlo N-Particle (MCNP). All calculations were performed using internal UK Atomic Energy Authority (UKAEA) Intel Xeon E5-2640 high-performance computing cluster with 16 CPU cores, two sockets per physical node, and 125 GB of RAM. The detector, modelled in MCNP, was the Trans-SPEC-DX-100T HPGe detector (as shown in figure 1 ), which is housed in the radiological assay and detection lab (RADLab) at UKAEA. A total of 1258 MCNP models were generated by randomly varying four parameters of cylindrical items within set limits, which were determined to mimic likely sample geometries and measurements in the RADLab. The four parameters were sample density, sample height, sample radius, and distance to the detector. Each geometry required 11 MCNP files, one per output energy, in order to generate an efficiency curve. The 11 gamma ray energies were chosen to include the nuclides most relevant in fusion measurements and to cover the full spectrum energy range of interest to enable interpolation between energies. These were: 59 keV, 88 keV, 122 keV, 150 keV, 200 keV, 300 keV, 400 keV, 500 keV, 661 keV, 1173 keV, and 1332 keV. The full data set (1258 MCNP models), was split into 80% training data (1006 geometries) and 20% test data (252 geometries). Figure 2 shows the efficiency curves of 1% of the full data set (1% so that the curves can be seen clearly without overlap) and figure 2 shows some example MCNP models. Figure 2 : a) Efficiency curves of 1% of the full 1258 simulated cylindrical geometries. b) Top down view from MCNP of 3 of the 1258 geometries simulated, showing example variations in the simulations, such as varying radius and detector-to-sample distance. The detector is on the left and the cylindrical samples are on the right 2.2 Machine learning model selection and training The MaLBEC is a supervised regression machine learning model, specifically using a multilayer perceptron (MLP). These MLPs are a class of feedforward artificial neural networks (ANN) and they comprise an input layer, one or more hidden layers, and one output layer MLP_scikitlearn . The MLPs are trained using an algorithm called the backpropagation training algorithm, where the data are randomly shuffled and split into mini-batches (mini-batch size is fixed at 200 samples), which are passed through the MLP multiple times - each full pass of all mini-batches is called an epoch ML_handson_book . During training, the weights (the internal parameters that control the model’s predictions) are updated once per mini-batch — these updates are called iterations. On the forward pass, predictions are made and stored for each neuron (a computational unit that receives inputs, performs calculations, and produces an output goodfellow ), and then the output error is calculated using a loss function to compare the true output to the predicted output of the network ML_handson_book