A “Faux-Shock” Method for Hybrid Simulations of Astrophysical Shocks
Emily Simon, Damiano Caprioli, Colby C. Haggerty, Brian Reville · 2025
Read A “Faux-Shock” Method for Hybrid Simulations of Astrophysical Shocks by Emily Simon, Damiano Caprioli, Colby C. Haggerty, Brian Reville (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-14282.txt.
Introduction
Emily Simon and three co-authors present a study from twenty twenty-five on a cheap trick for shock simulations in space physics. Hybrid codes track ions as particles and electrons as a fluid. Full shock runs are costly, and the zone ahead of the shock is the part of chief interest. Their faux shock setup puts a fake shock edge on one side of the box.
Particles that hit the edge pass through or bounce off with a shift that mimics the far side. The setup keeps the zone ahead of the shock alive for long runs at low cost. Tests match fluid values and phase plots from full runs, even cases that once needed three dimensions. More particles fit in the box too.
Catalog record
| CREATOR | Emily Simon, Damiano Caprioli, Colby C. Haggerty, Brian Reville |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-14282
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A “Faux-Shock” Method for Hybrid Simulations of Astrophysical Shocks Emily Simon, Damiano Caprioli, Colby C. Haggerty, Brian Reville Abstract We demonstrate a novel setup for hybrid particle-in-cell simulations designed to isolate the physics of the shock precursor over long time periods for significantly lower computational cost than previous methods. This is achieved using a “faux-shock” or shock-like boundary condition on one edge of our simulation domain such that particles that interact with the boundary either pass through it or are reflected off of it with a change in momentum that mimics scattering in the downstream. We show that our faux-shock setup reproduces the same fluid quantities and phase spaces as traditional shock simulations, including those which could otherwise only be done in 3D, with higher particle resolution and for reduced computational cost. While the method involves an assumed boundary condition, it nonetheless captures the essential physics of interest, establishing it as a reliable and efficient tool for future self-consistent studies of instabilities driven by cosmic rays in a shock upstream medium. show][email protected] I Introduction Diffusive shock acceleration (DSA) occurring at astrophysical shocks ( Krymskii 1977 ; Axford et al. 1977 ; Bell 1978 ; Blandford & Ostriker 1978 ) is thought to be responsible for the acceleration of galactic cosmic rays (CRs) up to 10^{15} eV and possibly beyond ( Bell et al. 2013 ; Cristofari et al. 2022 ; Vieu et al. 2022 , e.g.,) . DSA occurs across a wide range of astrophysical environments, from heliospheric shocks ( Guo & Giacalone 2013 ; Johlander et al. 2016 ; Turner et al. 2018 , e.g.,) and supernova remnants (SNRs) ( Lagage & Cesarsky 1983a ; Hillas 2005 ; Morlino & Caprioli 2012 , e.g.,) to galaxy clusters ( Brunetti & Jones 2014 ; Vazza et al. 2017 ; Böss et al. 2024 , e.g.,) , making it a universal process wherever shocks are present. Although DSA is widely invoked in models of CR acceleration, our understanding of the precise mechanisms by which CRs are accelerated at their respective sources and to what maximum energies is still incomplete. These uncertainties are largely due to the ways in which CRs modify shock hydrodynamics and drive the growth of plasma instabilities ( Drury 1983 ; Bell 2004 ; Haggerty et al. 2023 , e.g.) . In particular, it was pointed out that the non-resonant CR streaming instability ( Bell 2004 ) , also referred to as the Bell instability, could lead to nonlinear magnetic field amplification and subsequently higher CR maximum energies ( Bell et al. 2013 , e.g.,) . Simulations are the most effective tool for studying this process due to its nonlinear nature. In particular, kinetic simulations are required to capture the feedback of the instability on CRs themselves. However, self-consistently simulating this regime is computationally challenging. The instability occurs in the shock upstream and must begin growing sufficiently far away from the shock for the magnetic field to reach the nonlinear regime before advection sweeps the fields into the downstream. In most kinetic simulations, a shock is formed when a fluid hits a reflective wall and causes the reflected flow and the incoming flow to collide ( Winske & Quest 1988 , e.g.,) . This setup means that, for a fixed box, the shock propagates through the simulation domain, gradually shrinking the upstream length in time, thus limiting the available space for instabilities to grow in. Similarly, the transverse box size in 2 or 3 dimensions must be sufficiently large to allow the filamentation and cavities typical of Bell to grow without becoming truncated or only partially resolved ( Reville & Bell 2012 ; Caprioli & Spitkovsky 2013 ) . For typical astrophysical parameters resembling a SNR, the computational burden quickly becomes unfeasible; resolving the ion skin depth ( d_{\rm i}\sim 10^{5} cm) and plasma timescales (seconds) is essential for capturing the relevant microphysics, yet SNRs span many parsecs and evolve over tens of thousand years. Even in 1D, bridging this wide range of scales is computationally intractable. To address these computational challenges, we have devised a novel setup for hybrid PIC simulations designed to isolate the physics of the shock precursor while significantly reducing computational cost. This enables longer simulations in larger domains than previously feasible, providing a controlled platform for studying CR-driven magnetic field amplification and particle acceleration with near self-consistency. This is achieved by the implementation of a custom boundary condition on one wall of the simulation domain which we call a “ faux-shock ”. The faux-shock (hereafter: FS) mimics the physics of a shock, allowing some particles to pass and reflecting others with an energy kick as if they’ve been scattered in the downstream. Because the FS sits permanently on one wall of the box, the simulation is fixed in the shock frame, meaning the upstream has a constant length for the entirety of the simulation. The trade-off of this method is giving up the ability to self-consistently account for all the effects that occur at the shock, such as particle injection, as well as downstream particle scattering on the post-shock magnetic turbulence, which controls the CR anisotropies and drift motions ( Bell et al. 2011 ; Haggerty & Caprioli 2020 ; Caprioli et al. 2020 , e.g.,) which can affect the CR spectrum. Nevertheless, our formalism is flexible enough to allow us to implement all of these modifications by prescribing the rate of return of CRs from the downstream, their anisotropy, and their energy gain, calibrated via global hybrid and PIC simulations. The advantage of the presented formalism is twofold: on the one hand, we introduce CRs as a separate population from the thermal ions, which allows us to increase the statistics of energetic particles at modest computational cost and, on the other hand, this allows us to run shock-frame simulations in unprecedentedly-large boxes and for times long enough to observe the long-term evolution of the magnetic field amplification. The paper is organized as follows: in § II we discuss the specifics of the FS simulation setup and how it differs from traditional reflecting wall shock simulations. In § III we show results from the FS setup and compare them to benchmark reflecting wall shock simulations, and we conclude in § IV . Practical applications of the presented formalism will be presented in forthcoming works. II Faux-Shock Simulation Setup Run Setup M_{\rm A} c/v_{\rm A} L_{x}/d_{\rm i} L_{\perp}/d_{\rm i} \Delta x/d_{\rm i} \Delta t\Omega_{ci} \theta_{Bn} n_{\rm cr}/n_{\rm g} p_{\rm iso}/{mv_{\rm A}} \mathcal{A} faux-shock 20 1000 10000 300 1.5 0.005 0 0.01 100 \mathcal{B} faux-shock 100 10000 10000 50 1.5 0.00005 80 0.01 200 \mathcal{C} Reflecting Wall 20 1000 20000 300 1.5 0.005 0 N/A N/A 3\mathcal{D} Reflecting Wall 20 N/A 10000 50 2.5 0.00075 80 N/A N/A Table 1: List of the simulations considered in this work. Runs A, B, and C are performed in 2D with dHybridR . Run 3\mathcal{D} is performed in 3D with dHybrid , a strictly non-relativistic version of the same code. The speed of light in Run B is set sufficiently high to ensure CRs remain non-relativistic for accurate comparison to Run 3\mathcal{D} . Runs \mathcal{A} and \mathcal{B} use the FS setup, and \mathcal{C} and 3\mathcal{D} are traditional RW