Design of a Modular Mobile Inspection and Maintenance Robot for an Orbital Servicing Hub

Tianyuan Wang, Mark A Post, Mathieu Deremetz · 2025

Read Design of a Modular Mobile Inspection and Maintenance Robot for an Orbital Servicing Hub by Tianyuan Wang, Mark A Post, Mathieu Deremetz (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-14059.txt.

Introduction

Tianyuan Wang and co-authors design a mobile robot that inspects and services hardware inside a planned orbital warehouse, in this 2025 paper. The STARFAB hub would store and reuse space parts in orbit. Something must check both the stored goods and the station itself.

Their module rides on walking manipulators through standard connectors, so several units can be parked and fetched as needed. It carries sharp cameras, a 3D surface scanner, and a heat camera, with room for more sensors. A gripper and torque wrench ride inside for repair jobs by an attached arm. The paper lays out operations plus the mechanical and electronic design.

Catalog record

CREATORTianyuan Wang, Mark A Post, Mathieu Deremetz
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE14 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-14059

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Design of a Modular Mobile Inspection and Maintenance Robot for an Orbital Servicing Hub Tianyuan Wang, Mark A Post, Mathieu Deremetz Abstract The use of autonomous robots in space is an essential part of the “New Space” commercial ecosystem of assembly and re-use of space hardware components in Earth orbit and beyond. The STARFAB project aims to create a ground demonstration of an orbital automated warehouse as a hub for sustainable commercial operations and servicing. A critical part of this fully-autonomous robotic facility will be the capability to monitor, inspect, and assess the condition of both the components stored in the warehouse, and the STARFAB facility itself. This paper introduces ongoing work on the STARFAB Mobile Inspection Module (MIM). The MIM uses Standard Interconnects (SI) so that it can be carried by Walking Manipulators (WM) as an independently-mobile robot, and multiple MIMs can be stored and retrieved as needed for operations on STARFAB. The MIM carries high-resolution cameras, a 3D profilometer, and a thermal imaging sensor, with the capability to add other modular sensors. A grasping tool and torque wrench are stored within the modular body for use by an attached WM for maintenance operations. Implementation and testing is still ongoing at the time of writing. This paper details the concept of operations for the MIM as an on-orbit autonomous inspection and maintenance system, the mechanical and electronic design of the MIM, and the sensors package used for non-destructive testing. 1 Introduction Outer space has become easier to access than ever before with the advent of low-cost commercial launch technologies and improvements in space technology, communications and robotics. However, the current practice of simply launching single-use bespoke missions from Earth is not economical and sustainable, and the development of In-space Service, Assembly and Maintenance (ISAM) technologies has taken priority to facilitate this new ecosystem. The “New Space” or “Big Space” model that is now evolving envisions the use of modular space technologies with universal interoperability that can be assembled, deployed, retrieved, and maintained fully or partly autonomously through the use of robotics in Earth orbit and beyond. With this model comes the need for in-space robotic storage and handling of required items and resources, which we propose can be fulfilled in the form of an “Orbital Hub” that serves as a unified warehousing, assembly, and maintenance facility to which servicer spacecraft could dock and launch carrying with them satellites composed of modular components that can be serviced and reconfigured. To this end, the project “A Space Warehouse Concept and Ecosystem to Energize European ISAM (STARFAB)” [ 5 ] introduces a novel concept, the Orbital Automated Warehouse Unit (also known as the Orbital Depot), which serves as a backbone and enabler for sustainable ISAM commercial activities [ 2 ] . The introduction of capability to warehouse, reconfigure, and redeploy modular spacecraft components on-orbit brings with it the necessity to regularly inspect and maintain components remotely and at least semi-autonomously. The Inspection and Maintenance (I&M) capabilities within STARFAB focus on the detection, diagnosis, and reporting of malfunction or damage to facilities, systems, and contents. Non-destructive testing (NDT) methods provide the lifecycle analysis with failure prediction and diagnosis capability needed to plan the deployment and operation of modular spacecraft. STARFAB also needs the capability to carry out light maintenance interventions robotically and on demand, to implement planned or unplanned maintenance of the facilities. Complex interventions are not considered at present due to the high fundamental complexity of robotic maintenance activities on-orbit. The Inspection and Maintenance robot for STARFAB is designed as a self-contained spacecraft module called the Mobile Inspection Module (MIM). The MIM uses HOTDOCK (HD) Standard Interconnects (SI) so that it can be carried by Walking Manipulators (WM) and other mobile subsystems [ 4 ] . It also operates like any other self-contained modular element in the system with independent power and processing resources, and multiple MIMs can be stored and retrieved as needed for operations on STARFAB. 2 System Design Requirements Table 1 summarizes the Inspection and Maintenance requirements for STARFAB. The main inspection and maintenance challenges for STARFAB are due to requiring autonomous operation in a minimally-controlled vacuum and irradiated environment with extremes of temperature. This limits feasible NDT techniques at present to remotely-deployable optical sensing methods applicable to inspecting a wide range of materials and parts. Based on this set of requirements, the MIM is designed to carry a high-resolution machine vision camera with encircling illumination unit, optical 3D scanner, and thermal imaging camera. Maintenance activities are accomplished by using an additional WM to attach and manipulate a grasping tool and torque wrench. Table 1 : Inspection and Maintenance Requirements Element Requirement Payloads Automated NDT is possible for all payloads on all external surfaces. Spacecraft Hosted spacecraft shall be inspected externally without disassembly. Profilometry Scratch/deformation damage detected from debris larger than 0.3mm . Resolution Debris impact damage detectable down to 0.6mm diametric size. Reliability Damage features detected with 90\% probability to confidence of 95\% . Range Inspection within a range of 0.2m to 2m from the sensor array. Thermal Inspection distinguishes localized temperatures of -40^{\circ}C to 150^{\circ}C . Illumination Ring-topology visible spectrum illumination source is carried for vision. Handling Replacement parts handled and placed using dedicated robotic tools. Grasping Gripper tool can grasp objects with dimensions from 0.5cm to 10cm . Torque Torque tool compatible to NASA PGT tool one; 2.7Nm to 30Nm . Concept of Operations The primary use case for the MIM is the inspection of modular spacecraft components known as Orbital Replacement Units (ORUs) and components while they are on route to or from the primary structure. The MIM must be capable of being positioned at any stage of the ORU’s movement, while aiming to keep the primary structure unobstructed. The secondary use case for the MIM is inspection of the structural integrity of STARFAB itself, from both interior and exterior positions, and that of docked servicer spacecraft. The MIM can be be positioned by “walking” over designated fixture points on the structure with WMs, transported by attaching via a WM to a shuttle system, or attached in place to a fixture point via a WM as an “eye in hand” sensor. Figure 1 : Operations of the MIM performing I&M inside and outside STARFAB. 3 Mechanical Design Form Factor (a) (b) Figure 2 : Mechanical design of the MIM. ( a ) An overview of the MIM with HDs attached. ( d ) An exploded view of the main constituent parts of the MIM. The form factor of the MIM is based on the Multi-Arms Robot (MAR) developed for on-orbit large telescope assembly [ 1 ] . Design underwent three major iterations with careful consideration given to the I&M requirements, as well as ensuring compatibility with the STARFAB’s existing system, which eventually led to a final iteration that aligned with the MAR form factor, shown in Figure 2 , to achieve several objectives. First, adopting the MAR torso’s form factor allows the MIM to utilize the same kinematic configuration, ensuring seamless integration with the existing system. Second, the evenly distributed three HDs, when paired with the WM, provide enhanced flexibility, where the third HD can be positioned as needed to interface with tools. The MAR

Read the complete text