Real time observation of glass-like carbon formation from SU-8 using X-ray and ultraviolet photoelectron spectroscopy Journal: Carbon
Simon Astley, Jaspa Stritt, Soumen Mandal, Jerome A. Cuenca, D. Andrew Evans, Oliver A. Williams · 2025
Read Real time observation of glass-like carbon formation from SU-8 using X-ray and ultraviolet photoelectron spectroscopy Journal: Carbon by Simon Astley, Jaspa Stritt, Soumen Mandal, Jerome A. Cuenca, D. Andrew Evans, Oliver A. Williams (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-14053.txt.
Introduction
Simon Astley and co-authors wrote a 2025 paper that watches a photoresist turn into glass-like carbon in real time. The resist, SU-8, is a workhorse for tiny devices. Baking it without air, a step called pyrolysis, turns it into a hard carbon that conducts power.
The team heated thin films step by step to a very high heat in a vacuum. Two light based tools read the surface as it changed. A lopsided shape in one carbon peak marked the flip from insulator to conductor. Oxygen share and peak spots tracked the same flip. Past a mid heat point, the film grew into a carbon rich conducting web. A second tool's edge and band reads matched the story.
Catalog record
| CREATOR | Simon Astley, Jaspa Stritt, Soumen Mandal, Jerome A. Cuenca, D. Andrew Evans, Oliver A. Williams |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 32 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-14053
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Real time observation of glass-like carbon formation from SU-8 using X-ray and ultraviolet photoelectron spectroscopy Journal: Carbon Simon Astley, Jaspa Stritt, Soumen Mandal, Jerome A. Cuenca, D. Andrew Evans, Oliver A. Williams Abstract The structural development and change in elemental composition of SU-8 3005 photoresist into glass-like carbon due to pyrolysis up to 1000 ° \degree C is investigated utilising in-situ x-ray and ultraviolet photoelectron spectroscopy (XPS/UPS) under ultra-high vacuum (UHV). XPS spectra were analysed in order to investigate changes to elemental composition and physical structure. Peak asymmetry in the measured C 1s spectra is found to be a clear indicator of a transition in both physical structure and increased electrical conductivity. The in-situ XPS measurement of pyrolysis is effective in isolating changes in oxygen composition solely due to the pyrolysis process. Oxygen concentration, C 1s peak asymmetry and C 1s peak positions are strong indicators of semiconducting SU-8 transitioning to conducting glass-like carbon. For SU-8 pyrolysed above temperatures of 500 ° \degree C, a clear development is observed in the material structure and composition towards a carbon rich conducting network indicative of glass-like carbon. UPS spectra were analysed to investigate the changes in secondary electron cut-off (SECO) and valence band maximum (VBM) as the SU-8 layer is heated in UHV. The changes in SECO and VBM correlates well with the XPS data and a zero binding energy state is observed at 1000 ° \degree C. † † highlights: In-situ observation of glass-like carbon formation. X-ray photoelectron spectroscopy showing transformation of non - conductive SU-8 to a conductive thin film. Observation of structural oxygen reduction between 300 and 600 o C leading to the formation of a carbon rich network. Appearance of various features in UPS data in-line with compositional changes observed in XPS data. Appearance of zero binding energy state at 1000 \degree C. 1 Introduction Glass-like carbon (GC) is a non-graphitising form of carbon having glass-like surface and exceptional properties including high-thermal stability, chemical resistance and electrical conductivity [ 1 , 2 ] . It finds applications in electrochemistry [ 3 , 4 ] , biosensors [ 5 , 6 ] , micro-electrical-mechanical systems (MEMS) [ 7 , 8 , 9 ] etc due to its corrosion resistance [ 1 , 2 ] and biocompatibility [ 1 , 2 ] . Polymeric materials like SU-8 form the starting material for formation of GC through high temperature pyrolysis in an inert atmosphere. The structure of glass-like carbon is typically characterised by either a ribbon-like arrangement [ 10 , 11 ] or a fullerene-related framework [ 12 ] . Both models describe its formation through the pyrolysis of an organic polymer, a process that preserves the morphology of the precursor while bypassing a plastic phase. The major steps of pyrolysis include i) Pre-carbonisation (elimination of solvent and unreacted monomer at temperatures below 300 \degree C), ii) Carbonisation (the elimination of oxygen and hydrogen as well as the development of an interconnected polymer-like sp 2 carbon structure at temperatures of 300 \degree C < T < 1200 \degree C) and iii) Annealing (eliminating defects/impurities and further increases the inter-connectivity of the carbon network) [ 8 ] . Figure 1 shows the structure of SU-8 molecule [ 13 ] and a schematic of non-graphitising carbon based on Harris’ model [ 14 ] . The SU-8 is a negative tone photoresist consisting of eight equivalent epoxy and eight equivalent ether sites as shown in Figure 1 A. Once pyrolysed it forms glass-like carbon which can be schematically represented as a amalgamation of graphene and fullerene like structures as described by the Harris’ model [ 14 ] (Figure 1 B) and also reported by Sharma et al. [ 15 ] using in-situ transmission electron microscopy. Figure 1: A) The chemical structure SU-8 molecule is shown here. (Adapted with permission from Genolet et al. [ 13 ] ) B) Schematic of glass-like carbon based on Harris’ model [ 14 ] where the the non-graphitising carbons are shown as an amalgamation of graphene and fullerene like structures. (Reprinted with permission from Harris [ 14 ] ). In this work X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) was used to study the real time carbonisation and annealing step in the formation of glass-like carbon from SU-8 photoresist in ultra high vacuum (UHV). 2 Experimental Methods SU-8 was originally developed by IBM [ 16 , 17 ] as a photoresist material, sensitive to near-UV radiation (365nm). The photoresist cross links to produce a polymer structure through a process called cationic polymerisation, whereby the introduction of a positive ion results in the opening of an epoxy ring in order to allow for chemical bonding to epoxy groups of other SU-8 molecules [ 18 ] . SU-8 is typically dissolved in an organic solvent along with a photoacid generator (Triarylsulfonium/hexafluoroantimonate salt) that produces a strong acid (H+ ions) when exposed to UV-radiation [ 18 ] . Exposure to near-UV radiation produces H+ ions across the entire sample [ 19 ] . A post-exposure baking step is then used to promote a series of cross-linking reactions between epoxide groups in the exposed areas. The resultant material is a series of SU-8 molecules, each cross-linked to a maximum of 8 other molecules, resulting in a highly connected polymer network [ 18 , 20 , 21 ] . 2.1 Sample Preparation In this study, SU-8 3005 photoresist was spun onto 10 x 10 mm silicon substrates at a speed of 2000 rpm for 45 seconds followed by a soft bake at 110 \degree C. The samples were then flood exposed to broadband UV light from a mercury-xenon gas lamp in order to form cross links between the epoxy groups to form a large polymer network followed by a post-exposure bake also at 110 \degree C. The samples were then heat treated to 300 \degree C in order to remove any solvent and photosensitiser. The samples were placed into an Inconel Alloy 600 tube furnace. The tube then underwent 3 purge cycles of being evacuated to 2 mbar and flooded with argon up to 500 mbar. After purging, the furnace was once again evacuated to 2 mbar before introducing a constant flow of 200 SCCM of argon and maintaining a pressure of 50 mbar. The samples were heated from room temperature to 300 \degree C at a rate of 2 \degree C/min and held at this temperature for 1 hour. The samples were then allowed to cool back to room temperature before being removed from the tube furnace. 2.2 X-ray photoelectron spectroscopy C 1s and O 1s core level spectra were measured using XPS in real-time [ 22 ] to determine changes in chemical composition of SU-8 through pyrolysis via the desorption of oxygen, restructuring of cross-linked SU-8 into a conducting sp 2 state, and conductivity of the sample through the asymmetry of the C 1s peak. Photoelectrons were collected and energy analysed using a SPECS phoibos 100 analyser with a PreVac twin anode X-Ray flood source providing Mg K \alpha un-monochromated x-Rays at a 54 \degree angle, at a base pressure of 6 \times 10 -10 mbar. The data were collected using a 3 \times 7 mm slit and a 5