Deep Micro Solvers for Rough-Wall Stokes Flow in a Heterogeneous Multiscale Method
Emanuel Ström, Anna-Karin Tornberg, Ozan Öktem · 2025
Read Deep Micro Solvers for Rough-Wall Stokes Flow in a Heterogeneous Multiscale Method by Emanuel Ström, Anna-Karin Tornberg, Ozan Öktem (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-13902.txt.
Introduction
Learned micro solvers for flow near rough walls are set out by Emanuel Ström, Anna-Karin Tornberg, and Ozan Öktem in a 2025 arXiv paper. Flow past a rough wall is solved at two scales in the classic method, but the small scale runs cost much time. Their net learns those small runs ahead of time. It maps wall shape to the weights for local flow means.
Since the net leans on wall shape alone, it trains apart from edge settings. Proofs tie a bounded training loss to a bounded error in the big flow. Tests match the classic method on skill while the small runs cost far less. Rough scale shifts stay stable.
Catalog record
| CREATOR | Emanuel Ström, Anna-Karin Tornberg, Ozan Öktem |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 135 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-13902
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Deep Micro Solvers for Rough-Wall Stokes Flow in a Heterogeneous Multiscale Method Emanuel Ström, Anna-Karin Tornberg, Ozan Öktem Abstract We propose a learned precomputation for the heterogeneous multiscale method (HMM) for rough-wall Stokes flow. A Fourier neural operator is used to approximate local averages over microscopic subsets of the flow, which allows to compute an effective slip length of the fluid away from the roughness. The network is designed to map from the local wall geometry to the Riesz representors for the corresponding local flow averages. With such a parameterisation, the network only depends on the local wall geometry and as such can be trained independent of boundary conditions. We perform a detailed theoretical analysis of the statistical error propagation, and prove that under suitable regularity and scaling assumptions, a bounded training loss leads to a bounded error in the resulting macroscopic flow. We then demonstrate on a family of test problems that the learned precomputation performs stably with respect to the scale of the roughness. The accuracy in the HMM solution for the macroscopic flow is comparable to when the local (micro) problems are solved using a classical approach, while the computational cost of solving the micro problems is significantly reduced. 1 Introduction When devising simulation studies of macroscopic properties of fluid flows over a rough terrain, the large scale separation between terrain structure and the size of the simulation region causes problems for classical solvers. Grids that fully resolve the roughness are typically too costly to use, whereas coarse grids fail to capture the effects of the terrain (see fig. 2 ). A classical approach to remedy the problem of mixed scales is to model them separately; one first approximates the effects of the rough topology on a localized region close to the wall, and translates the effects to a simplified computational region with slightly altered boundary data, called a wall law [ 13 ] . Asymptotic homogenization methods have been used to derive wall-laws for viscous flows over a surface with periodic roughness [ 19 , 18 , 3 ] , as well as random, ergodic roughness [ 5 , 12 ] . For these flows one commonly uses a Navier-slip condition, a Robin-type boundary condition that relates the wall shear stress to the fluid velocity at the wall by a proportionality constant (the slip amount ). The slip amount is determined from the solution to a problem on a reference domain that includes the boundary, also called a unit cell problem . Carney and Engquist applied the heterogeneous multiscale method (HMM) to laminar viscous flow over a non-periodic, non-ergodic rough wall in [ 10 ] . HMM is a general framework for multiscale modelling which assumes that the governing equations are known at both the macroscopic and microscopic scales, up to a set of simulation parameters. The key building blocks of HMM are a compression operator that maps micro scale data to key parameters that govern the macro scale behavior (e.g. slip amount), and a reconstruction operator that extracts relevant macroscopic data which modulate the micro scale (e.g. flow rates at the boundary) [ 13 ] . In the paper by Carney and Enquist, the compression operator extracts pointwise slip amount via not only one (as in asymptotic homogenization), but several microscopic simulations of the linearized flow along the rough wall. Contrary to homogenization, the boundary conditions of the microscopic flow are set by the macroscopic flow. This results in a coupled system that involves both the macroscopic and microscopic variables. In cases when the microscopic solution, compression and reconstruction operators are all linear , one can efficiently precompute the composition of these three operators (or a subset of them) using the representation theorem . One important note is that solving multiple microscopic problems can often be more expensive than solving the macroscopic system. Furthermore, wall-laws incur a modelling error which cannot be overcome by HMM , even with exact micro solvers. Hence, there is a high tolerance for error in the micro solvers for HMM compared to fully resolving methods, and a simultaneous need for reduced computational cost. One promising idea, which we explore further in this paper, is to learn a microscopic solution procedure in HMM by training against simulation data [ 14 ] . The key underlying observation motivating this approach is that deep learning based approximations are, once trained, often faster to evaluate than traditional numerical approximations, and that a decrease accuracy compared to classical numerical schemes can be acceptable in the case of HMM . As the geometry of the micro domains vary, it is essential that the learned approximation generalizes over the types of geometries that one expect to encounter. Most work on deep learning for multiscale problems focuses on sequential methods where information propagates between the scales in only one direction. An example is the work on deep potentials by E et al that leverages deep neural networks to find potentials for atomistic particle interactions , trained on quantum dynamics [ 36 ] . Other examples are prediction of stress fields [ 7 ] and crystalline structure [ 31 ] , and homogenized quantities [ 27 ] in microstructures in materials science. See the review by Baek et al for a comprehensive overview of ML methods for multiscale problems [ 30 ] . In contrast to sequential methods, concurrent methods employ a feedback loop in which information flows both from small to large scales and from large to small scales. There is less work on ML for concurrent methods. An example is [ 27 ] , which uses the PCA-Net architecture from [ 8 ] to learn solutions to a local unit-cell problem in the micro scale variables. The averages feed into a dynamical macro scale deformation model, which in turn updates the boundary condition of the unit-cell. 1.1 Outline and Contributions We consider the setting of rough-wall laminar flow, and propose a learned precomputation for the composition of micro solution and compression operators in the HMM approach from [ 10 ] . Our approach uses a Fourier neural operator (FNO) [ 25 ] , whose input is a parameterization of the wall geometry, and whose output is the Riesz representor for the composition of the microscopic solution operator with the compression operator. Leveraging Riesz representation theorem in this way is beneficial for any HMM approach, but especially so when the Riesz representor is learned from data. We effectively cut the input dimension in half and subsequently improve sample complexity, since there is no need to incorporate boundary values as a part of the training data. The network architecture makes use of a formulation based on a boundary integral equation (BIE) , which enables a significant reduction in dimensionality, and generalizes over a range of geometries. The paper is structured as follows. Section 2 presents a mathematical formulation of the rough-wall flow problem along with a review of the HMM method from [ 10 ] . There we also formulate a precomputation method based on adjoint calculus. We describe the network architecture and related learning problem in section 4 . Then, in section 5 we show that under suitable regularity assumptions, a bounded training loss leads to a bounded