Reconstructing Air-Shower Observables using a Universality-Based Model at the Pierre Auger Observatory
Maximilian Stadelmaier · 2025
Read Reconstructing Air-Shower Observables using a Universality-Based Model at the Pierre Auger Observatory by Maximilian Stadelmaier (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-13209.txt.
Introduction
Maximilian Stadelmaier rebuilds cosmic ray air showers with a universality model in a 2025 dissertation-style study from the Pierre Auger Observatory. When an ultra-high-energy cosmic ray hits the upper air, it spawns a vast shower of particles. Universality says showers sharing energy, angle, depth of maximum, and muon count should share the same particle spread along and across the shower.
A model built on cascade equation solutions, extended with hadronic parts, turns detector readings into estimates of those key parameters. Cheaper, principled work helps the observatory squeeze physics from every rare event.
Catalog record
| CREATOR | Maximilian Stadelmaier |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-13209
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Reconstructing Air-Shower Observables using a Universality-Based Model at the Pierre Auger Observatory Maximilian Stadelmaier Abstract Based on solutions of the cascade equations, the air-shower universality is a framework that for all air showers with the same energy, zenith angle, depth of shower maximum, and muon number predicts the same longitudinal, lateral, and energy distributions of electromagnetic shower particles. We employ a universality-based model of shower development that incorporates hadronic particle components to reconstruct observables from extensive air showers produced by ultra-high-energy cosmic rays. The model can estimate key parameters, such as the depth of the shower maximum and the number of muons at the event level. We discuss the performance of the reconstruction algorithm using both air-shower simulations, and preliminary results obtained from the Phase-I data of the Pierre Auger Observatory. 1 Introduction The origin and nature of ultrahigh-energy cosmic rays (UHECRs) is an open problem of modern Astroparticle Physics. In the last decades, the Telescope Array [ 1 ] and the Pierre Auger Observatory [ 2 ] were established to detect cosmic rays at the highest energies, up to 100 EeV and beyond, and to resolve conflicting results of previous experiments. According to the recent results of the Pierre Auger Observatory, the flux of cosmic rays at the highest energies is composed of an extra-galactic component [ 3 ] , which is of a mixed-mass composition [ 4 , 5 ] , and which shows spectral features [ 6 ] such as a strong suppression of the flux beyond about 50 EeV, for which several different possible explanations have been hypothesized. Ground-based cosmic ray experiments rely on the detection of the air-shower phenomenon. Air showers occur when very energetic particles enter the Earth’s atmosphere, which acts as a calorimeter in which the energy of the primary cosmic ray is converted into cascades of secondary particles that reach up to several kilometers in diameter and comprise approximately 10^{9} particles per EeV of the primary energy. They can be detected directly in clear moonless nights by observing the fluorescence light produced by the excitation of nitrogen in the atmosphere, or indirectly by recording the particles that reach the ground. Air-shower profiles, observed as fluorescence light, yield valuable information about the primary cosmic rays. The total fluorescence light emitted is a reliable proxy for the number of particles produced in the air shower, and thus for the energy of the primary; and the development of the air-shower profile through the atmosphere, especially the depth X_{\text{max}} at which it appears the brightest (the shower maximum ), yields information about the type of the primary particle. Being restricted to nights with optimal atmospheric and light conditions, however, the direct detection of shower profiles is only feasible {\sim}15\% of the time. Surface detectors, which are operational up to 100% of the time, do not directly record the air-shower development through the atmosphere, but measure the secondary shower particles that reach the ground in terms of the total particle density as well as the arrival time of the particles. It has been demonstrated that the depth of the shower maximum X_{\text{max}} can be inferred empirically from the temporal information of the particles reaching the ground [ 7 ] . In this way, information about the shower development is accessible at the highest energies, where the flux of UHECRs is too low to collect a sufficient number of events during the operational time of fluorescence detectors. In this work, we present X_{\text{max}} of UHECRs recorded by the surface detector of the Pierre Auger Observatory at primary energies above 4\,\text{EeV} , estimated using a novel method that is based on the established idea of an air-shower universality [ 8 , 9 , 10 ] . The method makes use of a physically motivated model of the particle densities in air showers and can be extended to extract also other air-shower observables. 2 The Pierre Auger Observatory The Pierre Auger Observatory is the largest cosmic ray detector in the world. Up to this date it has collected an unprecedented amount of data and exposure during its {\sim}20 years of operation. The observatory is located on the plateau of the Argentinean Pampa Amarilla at an average altitude of 1400 m above sea level. It is equipped with a set of fluorescence detector (FD) telescopes as well as with a 3000 km 2 surface detector (SD) array [ 11 , 12 ] . Its hybrid detector setup allows for an absolute calibration of the SD using the FD telescopes. The main SD array is comprised of {\sim}1600 water-Cherenkov detectors (WCDs). The WCDs are each filled with 12 tons of purified water and collect the Cherenkov light emitted by through-going air-shower particles using three photo-multipliers. The signals are digitized and sampled in 25 ns time bins. The detectors are calibrated in terms of VEM, which is the most probable signal of a vertical through-going atmospheric muon [ 13 ] . For an overview of the detector operation see [ 2 ] . The surface detector is fully efficient to detect cosmic rays above a primary energy of E_{0}=10^{18.5}\,\text{eV}=3 EeV. Approximately 50 UHECRs are detected each day above full efficiency and within a zenith angle 1 1 1 The Pierre Auger SD is capable of also detecting cosmic rays with arrival directions within 60^{\circ}<\theta<80^{\circ} , however, due to larger asymmetries arising from the geomagnetic field a special reconstruction technique is applied for such inclined events [ 14 ] . of \theta\lesssim 60^{\circ} [ 15 ] , and approximately 25 UHECRs are recorded each day with energies above 4 EeV. 3 Measurement of the Mass Composition of Cosmic Rays The mass composition of UHECRs cannot be measured directly, but only through proxy observables from air-shower measurements. The atmospheric depth X_{\text{max}} , at which the shower reaches its maximum, is directly linked to the nuclear mass A of the primary cosmic ray [ 16 ] . On average, lighter primary particles of a given energy produce deeper showers, while heavier have shallower development. At the same time, the number of muons in air showers initiated by heavy nuclei is enhanced relatively to the lighter primaries. Both the number of muons and X_{\text{max}} can be accurately measured using the hybrid detector of the Pierre Auger Observatory [ 17 , 4 , 18 ] . Using surface-detector data only, however, this is a challenging task. The surface detector alone has no direct access to information about the air-shower profile, and thus the calorimetric energy deposit as well as the shower development cannot be measured. The energy E_{0} of the primary particle and X_{\text{max}} , however, can be estimated from the shower footprint on the ground and from the temporal distribution of the particles in the detectors, respectively [ 15 , 7 , 19 ] . The number of muons, as well, can be estimated from the footprint of the shower at the ground, but, depending on how the total energy estimate is obtained, can be significantly biased with respect to the expectations for different primary particles. An unbiased estimate of the muon number can easily be attained from the shower footprint if an independent energy estimate such as from the FD is available. 4 The Universality Shower