Probing nontrivial fusion of Majorana zero modes via near-adiabatic coupling

Jing Bai, Luting Xu, Wei Feng, Xin-Qi Li · 2025

Read Probing nontrivial fusion of Majorana zero modes via near-adiabatic coupling by Jing Bai, Luting Xu, Wei Feng, Xin-Qi Li (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-12772.txt.

Introduction

Jing Bai and co-authors propose a simpler way to probe how Majorana zero modes fuse, published in 2025. These modes are exotic states sought for future quantum devices. Testing whether their fusion is truly nontrivial has been hard, in part due to oscillating charge in the probing dot used to read them out.

Their scheme couples the modes in a near-adiabatic way, which avoids that charge problem. It also shows how to read signs of non-ideal steps and of parity loss during the fusion, from states prepared with a set parity. All simulations rest on a lattice model of a Rashba wire next to a standard superconductor. Small gate voltages control the setup in the model.

Catalog record

CREATORJing Bai, Luting Xu, Wei Feng, Xin-Qi Li
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-12772

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Probing nontrivial fusion of Majorana zero modes via near-adiabatic coupling Jing Bai, Luting Xu, Wei Feng, Xin-Qi Li Abstract We propose and simulate a near-adiabatically coupling probing scheme for nontrivial fusion of a pair of Majorara zero modes (MZMs). The scheme can avoid the complexity of oscillating charge occupation in the probing quantum dot, making thus practical measurements more feasible. We also show how to extract the information of nonadiabatic transition and fermion parity violation caused during moving the MZMs together to fuse, from the initial states prepared with definite fermion parity. All the simulations, including the effective coupling between the fusing MZMs, and their coupling to the probing quantum dot, are based on the lattice model of a Rashba quantum wire in proximity contact with an s s -wave superconductor, under the modulation of mini-gate voltage control. Introduction .— In the past decade, considerable progress has been achieved for realizing the MZMs in various experimental platforms DS23 ; Liu23 ; Gao22 . Yet, the main experimental evidences are largely restricted in the zero-bias conductance peaks, which cannot ultimately confirm the realization of MZMs. An essential next and milestone step is to identify the MZMs by probing the underlying non-Abelian statistics, via either braiding or fusion experiments. Typically, the non-Abelian statistics of MZMs is reflected by quantum state evolution in the manifold of highly degenerate ground states, when braiding MZMs in real space Fish11 ; Opp12 ; Roy19 ; Han20 . The fact that adiabatically braiding a pair of MZMs would lead to a unitary evolution matrix, rather than to a scalar phase factor, indicates the quantum dimension d>1 . This can be equivalently reflected by fusing two MZMs from different pairs to stochastically yield outcomes of either a vacuum, or an unpaired fermion (resulting in an extra charge) Ali16 ; BNK20 ; Leij22 ; NC22 ; Li24a ; Li24b . The nontrivial fusion with two outcomes can serve also as a demonstration of non-Abelian statistics, since it indicates the quantum dimension d>1 . Figure 1: Schematic diagram of mini-gate-controlled transporting and fusing a pair of MZMs, \gamma_{2} and \gamma_{3} , from different Majorana pairs prepared initially with definite fermion parity. A single-level quantum dot (QD) is employed to probe the fusion outcomes, while the charge change in the QD is measured by a nearby quantum-point-contact (QPC) detector. In this work, we propose to adiabatically switch on the coupling of \gamma_{2} and \gamma_{3} to the QD, when they are moved close to each other. In this work, following refs. NC22 ; Li24a ; Li24b , we perform simulations for the transport and fusion of MZMs, as schematically shown in fig. 1, starting with the initial state prepared with definite fermion parity. The simulation is to base on the lattice model of topological-superconductor (TSC) quantum wires, under the modulation of mini-gate voltage control. In principle, in order to keep up the topological protection, the transport of MZMs should be adiabatically slow. However, in practice, this may contradict other requirements, such as avoiding the quasi-particle poisoning decoherence. Thus, we will simulate the transport of a MZM with finite speed, and pay particular attention to the effect of nonadiabatic transition Ali18 ; Kel19 ; Byr21 ; Sar11 ; Opp13 ; Shn13 ; Karz14 ; Fran17 ; Sau19 ; Tru23 and possible violation of the initial fermion parity in a single wire (a closed system). Importantly, we will simulate the detection of fusion outcomes and the degree of nonadiabatic transition and fermion-parity violation. In this context, we will establish an elegant connection of the nonadiabatic transition and fermion-parity violation with two modification factors, while these two factors can be determined from measuring the various occupation probabilities of the probing quantum dot (QD), as shown in fig. 1. With the help of this connection, one can extract the information of nonadiabatic transition and fermion parity violation caused when moving the MZMs together to fuse. Based on the lattice model, we will first obtain the effective coupling amplitudes of the fusing MZMs to the probing QD and the coupling energy between themselves, then consider near-adiabatically slow coupling during the fusion and detection stage. The idea of slow coupling was briefly discussed in ref. Li24a , in the absence of nonadiabatic transition, where the low-energy effective Majorana mode model was employed in a direct manner. The advantage of adiabatically switching on the coupling is that the state evolution follows an eigenenergy state, thus not suffering the complexity of strong quantum oscillations of the QD occupation Li24b . This will drastically simplify the measurement of the QD occupation probability and important information extraction, in comparison with the sudden-coupling scheme analyzed in ref. Li24b . We will numerically demonstrate how the scheme can work well by using the coarse-grained time average of the stationary QD occupation after fusion, in the case of slow but finite-speed fusing and probing coupling. Theoretical Formulation .— As schematically shown in fig. 1, we will consider to fuse the pair of Majorana modes \gamma_{2} and \gamma_{3} , and demonstrate the nontrivial fusion rule \gamma_{2}\times\gamma_{3}=I+\psi , which means that the fusion will stochastically annihilate \gamma_{2} and \gamma_{3} into a vacuum ( I ) or create a regular fermion ( \psi ). For this purpose, \gamma_{2} and \gamma_{3} should come from different Majorana pairs with definite fermion parities. Therefore, in practice, we need to initially prepare the Majorana pairs (\gamma_{1},\gamma_{2}) and (\gamma_{3},\gamma_{4}) in definite fermion parity state, e.g., in state |0_{12}0_{34}\rangle . In this work, hereafter, we will use n_{ij}=0 and 1 to denote the empty and occupied states of the regular fermion f_{ij} , which is defined from the Majorana modes \gamma_{i} and \gamma_{j} . According to the proposal in ref. NC22 , this can be realized as follows. By means of mini-gate-voltage control, first, move \gamma_{2} and \gamma_{3} to the ends of the two wires, close to \gamma_{1} and \gamma_{4} ; then, empty the occupations of the regular fermions f_{12} and f_{34} . Starting with |0_{12}0_{34}\rangle , move \gamma_{2} and \gamma_{3} back to the central part to fuse. In this work, we assume that the TSC quantum wire shown in fig. 1 is realized by a semiconductor nanowire proximity-coupled to an s -wave superconductor. Following ref. Ali18 , the lattice model Hamiltonian reads as \displaystyle H_{\rm QW}=-\frac{W}{2}\sum_{j\sigma}(c_{j,\sigma}^{\dagger}c_{j+1,\sigma}+c_{j+1,\sigma}^{\dagger}c_{j,\sigma}) \displaystyle+\sum_{j\sigma}(W-\mu_{j})c_{j,\sigma}^{\dagger}c_{j,\sigma}+V_{z}\sum_{j\sigma\sigma^{\prime}}c_{j,\sigma}^{\dagger}(\sigma^{z})_{\sigma\sigma^{\prime}}c_{j,\sigma^{\prime}} \displaystyle+\frac{\alpha_{\rm so}}{2}\sum_{j\sigma\sigma^{\prime}}\left[c_{j,\sigma}^{\dagger}(i\sigma^{y})_{\sigma\sigma^{\prime}}c_{j+1,\sigma^{\prime}}+c_{j+1,\sigma^{\prime}}^{\dagger}(i\sigma^{y})_{\sigma\sigma^{\prime}}c_{j,\sigma}\right] \displaystyle+\Delta\sum_{j}(c_{j,\uparrow}c_{j,\downarrow}+c_{j,\downarrow}^{\dagger}c_{j,\uparrow}^{\dagger})\,. (1) In this Hamiltonian, c_{j\sigma} is the electron annihilation operator at the j th lattice site and with spin \sigma , W is the hopping energy between two nearest sites, \mu_{j} is the local chemical potential which can be modulated by electrical mini-gates, V_{z} represents the Zeeman energy, \alpha_{\rm so} is the Rashba spin-orbit coupling energy, and \Delta is the proximity-effect-induced superconducting energy gap. Moreover, the Pauli matrices \sigma^{z} and \sigma^{y} are introduced. For the purpose of numerically simulating the motion of the MZMs, we need to apply the Bogoliubov de-Gennes (BdG) formalism. The BdG Hamiltonian matrix H_{\rm BdG} can be constructed through the identity H_{\rm QW}=\frac{1}{2}\hat{\Psi}^{\dagger}H_{\rm BdG}\hat{\Psi} , with \hat{\Psi}=(c_{1\uparrow}\cdots c_{N\uparrow},c_{1\downarrow}\cdots c_{N\downarrow},c_{1\uparrow}^{\dagger}\cdots c_{N\uparrow}^{\dagger},c_{1\downarrow}^{\dagger}\cdots c_{N\downarrow}^{\dagger})^{T} , the so-called Nambu spinor. Moving the MZMs can be realized via the control of mini-gate voltages as proposed in ref. NC22 , to sequentially make transitions from non-topological to topological regime. After moving \gamma_{2} and \gamma_{3} to

Read the complete text