Band Meandering due to Charged Impurity Effects and Carrier Transport in Ternary Topological Insulators

Kanav Sharma, Niranjay K R, Radha Krishna Gopal, Chiranjib Mitra · 2025

Read Band Meandering due to Charged Impurity Effects and Carrier Transport in Ternary Topological Insulators by Kanav Sharma, Niranjay K R, Radha Krishna Gopal, Chiranjib Mitra (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-08579.txt.

Introduction

Kanav Sharma and co-authors study disorder in topological insulator films in a twenty twenty-five paper. These materials carry current on their surface in a protected way, but charged impurities in the bulk disturb that flow. Doping is often used to tune the material, yet its effect on the disorder itself was unclear.

The team grew films of a three-element compound and a version doped with indium. Gate tests showed the doping raised the impurity count tenfold and shrank the puddles of stray charge. Mobility on the surface fell as a direct result. Their lesson: to build good devices, cut defects at the source, not just balance them with doping.

Catalog record

CREATORKanav Sharma, Niranjay K R, Radha Krishna Gopal, Chiranjib Mitra
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-08579

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Band Meandering due to Charged Impurity Effects and Carrier Transport in Ternary Topological Insulators Kanav Sharma, Niranjay K R, Radha Krishna Gopal, Chiranjib Mitra Abstract In this study, we investigated the impact of charged impurities on the electrical properties of the topological insulator ( Bi 0.3 ​ Sb 0.7 ) 2 ​ Te 3 \left(\mathrm{Bi}_{0.3}\mathrm{Sb}_{0.7}\right)_{2}\mathrm{Te}_{3} (BST) and its indium-doped counterpart, In 0.14 ​ ( Bi 0.3 ​ Sb 0.7 ) 1.86 ​ Te 3 \mathrm{In}_{0.14}\left(\mathrm{Bi}_{0.3}\mathrm{Sb}_{0.7}\right)_{1.86}\mathrm{Te}_{3} (IBST), using field-effect gating. For thin BST (30 nm), charged impurities, potentially from silicon dioxide substrate traps, contribute to band tail-type localization, with the impurity density ( n imp = 10 11 ​ cm − 2 n_{\text{imp}}=10^{11}\text{ cm}^{-2} ) suggesting an external influence, though quantitative confirmation is needed. In contrast, thick BST (60 nm) exhibits potential fluctuations driven by inherent impurities ( n imp = 2.23 × 10 14 ​ cm − 2 n_{\text{imp}}=2.23\times 10^{14}\text{ cm}^{-2} ), forming electron-rich (n-type) and hole-rich (p-type) regions that cause band meandering near the chemical potential. Indium doping in thin IBST significantly increases the impurity density to 1.53 × 10 15 ​ cm − 2 1.53\times 10^{15}\text{ cm}^{-2} , exacerbating these fluctuations and reducing mobility due to enhanced scattering. Gate-dependence analysis further revealed a temperature-driven transition from n-type to p-type characteristics at elevated temperatures ( 170 K), attributed to thermal activation of holes in p-type regions. These findings highlight the critical role of impurity management in optimizing topological insulators for applications in spintronics and quantum computing. Topological insulators Hasan and Kane 2010 ; Kane and Mele 2005 ; Qi and Zhang 2011 ; Tokura, Yasuda, and Tsukazaki 2019 ; Moore 2010 ; Moore 2010 ; Shankar 2018 ; Bernevig, Hughes, and Zhang 2006 ; Fu, Kane, and Mele 2007 are unique quantum materials characterized by conducting surface states and bulk insulating states. This duality arises from the intricate interplay of their spin-momentum locking and time-reversal symmetry protection. The spin-momentum locking property ensures that the direction of an electron’s spin is intrinsically tied to its momentum, leading to robust surface conduction channels that are resilient to scattering from non-magnetic impurities or defects. These features make topological insulators highly promising for transformative applications across diverse fields. In spintronics, Fan and Wang 2016 , Pal et al. 2024 their spin-momentum lock surface states enable efficient spin transport, minimizing energy loss and enhancing device performance. In quantum computing, Fu and Kane 2008 the topologically protected surface states hold potential for creating fault-tolerant qubits, paving the way for more stable quantum systems. Beyond these, topological insulators find applications in novel optoelectronic devices, high-speed transistors, and even in exploring a variety of physical phenomena, making them pivotal in both applied science and fundamental research. Their unique properties continue to drive innovation, positioning them at the forefront of cutting-edge technological advancements. Dirac materials have captivated researchers due to their exceptional properties. The linear energy dispersion of Dirac electrons allows them to behave uniquely within these materials, leading to fascinating phenomena. Efforts are concentrated on maintaining the chemical potential near the Dirac point (DP) through methods like doping or electrical gating. In pristine conditions-free from internal or external impurities—Dirac electrons exhibit remarkable mobility. However, challenges arise due to any inherent charged impurities present in the system or when oxide dielectrics introduce charged impurities emanating from substrate contributions. Keeping the chemical potential near the DP under such scenarios results in complications. Since the density of states near DP is minimal, local impurities can lead to significant potential fluctuations, causing band meandering. Skinner, Chen, and Shklovskii 2012 This, in turn, generates charge puddles within the material. Studies reveal that charge puddles causes backscattering, which severely diminishes the performance of Dirac electrons. Graphene, the most extensively studied Dirac material, demonstrates fluctuations in charge density caused by charge-donating impurities beneath the graphene sheet. Scanning tunneling microscopy and spectroscopy have been employed by researchers to analyze these effects and explore the origin of spatial charge inhomogeneity in graphene. Zhang et al. 2009 Similarly, Yao et al. identified that using MoS_{2} as a substrate results in charge density inhomogeneities in germanene, forming charge puddles near the DP. Yao et al. 2019 Charge puddle formation is also common in topological insulators (TIs), and is a prominent topic in condensed matter physics research. These puddles arise from potential fluctuations induced by material compensation or local impurities. Band edges are modulated as a result, forming regions with positive and negative charges. Skinner et al. demonstrated that low resistivity in TIs is caused by band bending, arising out of inadequately screened fluctuations in the random Coulomb potential. Skinner, Chen, and Shklovskii 2012 Using numerical simulations, they observed that the bulk resistivity’s activation energy is only 0.15 times the band gap. This insight highlights charge puddles’ impact on TIs’ electrical properties. Understanding charge puddles is essential for optimizing Dirac materials for applications in quantum devices and spintronics. Further research on charge puddles is required to uncover intricate mechanisms underlying these materials extraordinary properties and expand their technological potential. Pulsed laser deposition (PLD) Pandey et al. 2019 , Singh et al. 2017a , Mitra et al. 2002 is a versatile and cost-effective technique widely utilized for the growth of polycrystalline crystals, offering an efficient approach to study the quantum properties of various materials. This method involves the use of high-energy laser pulses directed at a target material, which causes the ablation of its surface and the ejection of atoms and ions. These particles are subsequently deposited onto a substrate, forming a thin film. The key advantage of PLD lies in its ability to precisely control the stoichiometry and thickness of the deposited films, enabling the fabrication of high-quality crystals tailored for specific quantum property investigations. Furthermore, PLD is adaptable to a wide range of materials, including complex oxides, topological insulators, and superconductors, making it an invaluable tool in experimental condensed matter physics. Its flexibility allows researchers to vary deposition parameters, such as laser energy, substrate temperature, and background gas pressure, to achieve desired film characteristics. By leveraging the cost-effectiveness and precision of PLD, scientists can delve deeper into the quantum behaviors of materials, exploring phenomena like quantum Hall effects, superconductivity, and spintronics applications. We employed the same approach as before for growing our materials, utilizing the established method to ensure consistency and precision in our process. Sharma et al. 2024 Figure 1 : Shows resistance vs temperature at different gate voltages denoted by Vgs in volts. The figure on the right shows density of states of the valence band versus energy with chemical potential E_{F} at the band tail. The chemical potential can be modified either by applying gate voltage or by doping. Bhattacharyya et al. 2015 , Xu, Miotkowski, and Chen 2016 , Taskin et al. 2017 , Zhong et al. 2017 , Du et al. 2015 , Brahlek et al. 2012 Adjusting the chemical potential provides valuable insights into material properties, particularly in small band gap materials. We have grown three materials: BST and IBST with a thickness of 30 nm, which would be referred to as thin films, and BST with a thickness of 60 nm, which would be referred to as thick films. In the 30 nm thin BST sample, the chemical potential was observed

Read the complete text