PGD-based optimization of 3D bobsleigh track centerlines from 2D centerlines for simulation applications
Zhe Chen \affilnum 1, Huichao Zhao \affilnum 2, Yongfeng Jiang \affilnum 2, Minghui Bai \affilnum 2, Lun Li \affilnum 2, Jicheng Chen \affilnum 3 · 2025
Read PGD-based optimization of 3D bobsleigh track centerlines from 2D centerlines for simulation applications by Zhe Chen \affilnum 1, Huichao Zhao \affilnum 2, Yongfeng Jiang \affilnum 2, Minghui Bai \affilnum 2, Lun Li \affilnum 2, Jicheng Chen \affilnum 3 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-08393.txt.
Introduction
Zhe Chen and co-authors present a method to build three dimensional bobsleigh track centerlines in a 2025 paper. The centerline defines a track shape and is essential for simulation. Virtual training could cut costs, but public centerline data are usually only two dimensional, which is too imprecise alone.
Their method turns two dimensional data into a three dimensional line through optimization. Rules from international track design set limits on length, height drop, slope, and smoothness. A projected gradient method solves the problem. Against real track data, errors in length, height, and slope stayed within a few percent.
Catalog record
| CREATOR | Zhe Chen \affilnum 1, Huichao Zhao \affilnum 2, Yongfeng Jiang \affilnum 2, Minghui Bai \affilnum 2, Lun Li \affilnum 2, Jicheng Chen \affilnum 3 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 57 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-08393
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
PGD-based optimization of 3D bobsleigh track centerlines from 2D centerlines for simulation applications Zhe Chen \affilnum 1, Huichao Zhao \affilnum 2, Yongfeng Jiang \affilnum 2, Minghui Bai \affilnum 2, Lun Li \affilnum 2, Jicheng Chen \affilnum 3 Abstract The centerline of a bobsleigh track defines its geometry and is essential for simulation modeling. To reduce bBobsleigh training costs, leveraging the centerline of the bobsleigh track to construct a virtual environment that closely replicates real competitive settings presents a promising solution. However, publicly available centerline data are typically limited and it is imprecise to construct a training system solely based on 2-dimensional (2D) centerline. To address this practical issue, this paper proposes a method for generating a 3-dimensional (3D) track centerline based on 2D centerline data. Incorporating international track design regulations, the method formulates an optimization problem that considers total track length, height difference, slope constraints, and geometric continuity. A Projected Gradient Descent (PGD) algorithm is used to solve the optimization problem. The generated 3D centerlines are compared with real track data, and the results show that the method can reproduce realistic centerline trends from original or scaled 2D data. For the selected track segment, the relative errors in total length, height difference, and average slope are within 1.7%, 3.2% and 4.1%, respectively, for real 2D data and within 1.1%, 3.5% and 4.3% respectively for scaled data. All slope values remain within the allowable limits. Moreover, by adjusting the segmentation or modifying the weight of height difference in the cost function, various centerline styles applicable to different competitions can be generated. Under different segmentation and weight factors, the maximum errors reach up to 4.4%, 4.8%, and 9.8%, and 4.4%, 4.8%, and 10.0%, respectively. The proposed method provides a flexible and efficient tool for supporting bobsleigh track centerline design. keywords Bobsleigh, track centerline generation, international Olympic bobsleigh competition rules, projected gradient descent † † runninghead: Smith and Wittkopf † † affiliation: \affilnum 1School of Tansportation Science and Engineering, Beihang University, Beijing, China \affilnum 2FAW R&D General Institute, Changchun, China \affilnum 3School of Reliability and Systems Engineering, Beihang University, Beijing, China † † corresponding: Jicheng Chen, School of Reliability and Systems Engineering, Beihang University, 37 Xueyuan Road, Beijing 100191, China 1 Introduction Since bobsleigh was formally recognized as a Winter Olympics event in 1924, it has attracted widespread attention from participating countries [ 1 ] . Bobsleighs are unpowered vehicles that rely entirely on the initial push from athletes and the conversion of gravitational potential energy into kinetic energy as they descend the track [ 2 , 3 , 4 ] . The competition is timed to an accuracy of milliseconds, and the final times often differ by only a few tenths of a second [ 5 ] . To minimize energy loss, athletes typically avoid using the brake unless necessary before crossing the finish line. The dynamics of the bobsleigh and the driver’s control skill are key factors influencing performance [ 6 , 7 ] . However, due to restrictions from official governing bodies and the high cost of maintaining bobsleigh tracks [ 8 ] , even countries with access to tracks often do not allow athletes to train on them regularly. Typically, limited test runs are permitted only shortly before official competitions [ 9 , 10 , 11 , 12 ] . Consequently, simulation-based training and performance analysis have become vital tools for optimizing bobsleigh design and improving athlete technique. Researchers have developed virtual tracks, bobsleigh-blade/ice interaction models, multibody dynamics models of bobsleighs, and driver models. These simulation frameworks are increasingly being used to support bobsleigh structural design and help athletes devise optimal racing strategies. And there are limited studies on optimizing the centerline of bobsleigh tracks. Early bobsleigh simulation research was significantly constrained by the limited computational capabilities of CPUs at the time, often relying on simplified point-mass models moving on smooth hyperbolic surfaces [ 13 , 14 ] . The study [ 14 ] developed a partial surface model of a bobsleigh track, treating the bobsleigh as a point mass to analyze its dynamic response under external forces. However, the authors also acknowledged that due to the lack of available data, virtual training environments differ significantly from the real settings, limiting the variety of technical strategies athletes can efficiently practice. Based on this point-mass framework and real data from the Lillehammer track in Norway, The study [ 15 ] further designed an optimal controller to simulate bobsleigh driving behavior, aiding in athlete training. To better capture the complex nonlinear dynamics of bobsleigh motion on narrow, twisted, banked, and icy tracks, a geometric model is proposed [ 16 ] , which represents the tracks as a sequence of discrete points arranged along a 3D spatial curve. Moreover, a comprehensive simulation framework incorporating a blade–ice contact friction model is designed and validated on the Cesana and Whistler tracks, offering valuable guidance for track design and athlete training. The study [ 17 ] further validates its agreement between the simulated and experimental results on the Cesana track. However, the study did not involve real-time simulation, and the applicability of the proposed model to other official tracks worldwide was not examined. Subsequently, the geometric model is further extended into a multibody dynamics model in [ 9 ] , where more detailed dynamic characteristics are considered, resulting in better driving fidelity. Recent advances in bobsleigh simulation have focused on improving blade–ice friction modeling and virtual training environments [ 18 , 19 ] . The study [ 20 ] developed longitudinal and lateral friction models through experiments, FEM and nonlinear regression, validating their effectiveness in simulators to evaluate driving styles. Some studies further integrate steering and visual feedback or design immersive systems for training and tourism [ 13 , 9 , 20 , 21 ] . The study [ 21 ] introduced a VR hammock system to mimic sliding sensations, while the studies [ 22 , 23 ] proposed automated methods for generating 3D track surfaces. However, most of the aforementioned studies focus on the simulation of only one or two tracks, and the conclusions drawn lack generalizability. Many researchers have acknowledged the necessity of validating their proposed models against simulation results from other tracks in order to derive more universally applicable insights for athlete training. Currently, track data are primarily obtained through a combination of field measurements and industrial software modeling, which involves significant labor and material costs. Moreover, most countries do not publicly disclose the official data of their bobsleigh tracks. Therefore, acquiring a greater variety of available official track data worldwide has become an urgent need for enhancing both the diversity of research findings in simulation analysis and the general applicability of virtual training outcomes for bobsleigh athletes. The centerline of a bobsleigh track serves as a crucial dataset that defines the trajectory of the track. In contrast, the cross-sectional shapes are relatively standardized and can be generated using industrial software based on common templates [ 22 ] . This study focuses on typical bobsleigh track centerlines that determine the trajectory characteristics of the track and proposes a method for generating 3D centerlines from 2D centerlines. In accordance with international track design regulations, an optimization problem is formulated that considers factors such