On-axis afocal telescopes as framework for Cubesat based astronomical imagers and slit-less spectrographs

Anwesh Kumar Mishra 1,*, Gourav Banerjee 1,2, Rekhesh Mohan 1 and Maheswar Gopinathan 1 · 2025

Read On-axis afocal telescopes as framework for Cubesat based astronomical imagers and slit-less spectrographs by Anwesh Kumar Mishra 1,*, Gourav Banerjee 1,2, Rekhesh Mohan 1 and Maheswar Gopinathan 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-08323.txt.

Introduction

Anwesh Kumar Mishra and co-authors propose a telescope design tailored to CubeSats, the small boxy satellites now used for astronomy. CubeSats can watch the sky for long stretches and reach wavelengths blocked from the ground, but their tight volume and wobbly pointing strain standard telescope layouts. The team argues for afocal designs, which pass light through a collimated beam section.

That layout cuts the number of optical parts, raising light throughput and sensitivity. It also leaves room in the parallel beam for a small tilting mirror that steadies the pointing without smearing the image. One base design can serve as either a camera or a low-resolution spectrograph. The paper covers optical performance, signal estimates, guiding, and promising science targets for such missions.

Catalog record

CREATORAnwesh Kumar Mishra 1,*, Gourav Banerjee 1,2, Rekhesh Mohan 1 and Maheswar Gopinathan 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE80 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-08323

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

On-axis afocal telescopes as framework for Cubesat based astronomical imagers and slit-less spectrographs Anwesh Kumar Mishra 1,*, Gourav Banerjee 1,2, Rekhesh Mohan 1 and Maheswar Gopinathan 1 Abstract Cubesats present unique opportunities for observational astronomy in the modern era. They are useful in observing difficult-to-access wavelength regions and long-term monitoring of interesting astronomical sources. However, conventional telescope designs are not necessarily the best fit for restricted envelope of a Cubesat. Additionally, fine-pointing stability on these platforms is difficult due to the low mass of the spacecraft and special allocations within the optical design are needed to achieve stable pointing. We propose afocal telescope designs as the framework to realise imagers and low-resolution spectrographs on Cubesat platforms. These designs help reduce the number of components in the optical chain and aim to improve throughput and sensitivity compared to conventional designs. Additionally, they also provide a fine steering mechanism within a collimated beam section. Fine beam steering within the collimated beam section avoids issues of image degradation due to out-of-plane rotation of the image plane or offset in the rotation axis of the mirror. This permits the use of simple and mostly off-the-shelf tip-tilt mirrors for beam steering. The designs discussed here also allow for a standard telescope design to be used in many instrument types; thus reducing the complexity as well as the development time and cost. The optical design, performance and SNR estimations of these designs along with some interesting science cases are discussed. A number of practical aspects in implementation such as guiding, tolerancing, choice of detectors, vibration analysis and laboratory test setups are also presented. \affilOne 1 Indian Institute of Astrophysics, Koramangala, Bangalore,560034, India \affilTwo 2 Vainu Bappu Observatory, Kavalur, 635701, Tamilnadu,India. keywords Optical design—Cubesat—Fine steering mirror— Astronomical Instrumentation. \corres [email protected] \msinfo 1 January 20151 January 2015 \doinum 12.3456/s78910-011-012-3 \artcitid #### \volnum 000 0000 \pgrange 1– \lp 1 1 Introduction: astronomy with Cubesats In recent years, there has been remarkable progress in the technology and application of small satellites for both commercial and scientific use ( Poghosyan & Golkar 2017 ). Particularly, the Cubesat format and standardisation have been quite popular in terms of the number of satellites launched and planned ( Liddle ⁢ e t a l . 2020 ). Cubesat based observations from a Low Earth Orbit can complement ground based observations ( Shkolnik 2018 ) in terms of uninterrupted wavelength coverage (e.g. 150 nm-2500 nm) and good temporal coverage. This would be particularly interesting for monitoring of variable stars, such as pulsating or flaring types. Similarly, science cases such as asteroseismology ( Nowak ⁢ e t a l . 2016 ) and exoplanet studies ( Pong 2018 ) which require very long and uninterrupted observing runs can greatly benefit from Cubesat missions operating in sun-synchronous orbits. At the same time, Cubesats can achieve these goals with significantly smaller mission costs and shorter development time compared to larger space-based missions ( Serjeant ⁢ e t a l . 2020 ). This is promising for making space-based astronomical observations accessible to universities and research institutions alike. Additionally, Cubesats may also be used as a platform for technology demonstration and space qualification of critical components and systems and hence serve as a testing platform for bigger astronomical missions ( Morgan ⁢ e t a l . 2019 ). However, implementations based on Cubesats have to navigate around the following practical issues: • Pointing stability limitations: Astronomical telescopes typically require arcsecond level pointing accuracy in the line-of-sight direction and must maintain this pointing with minimal deviation for the complete duration of observation. Space borne astronomical telescopes must achieve this while in presence of various sources of micro-vibrations such as disturbances resulting from magnetic torques, solar radiation pressure, gravity gradient torques and several other factors ( Paluszek 2023 ). Conventional Attitude Determination and Control Systems (ADCS) are typically designed for larger platforms with higher mass (and hence inertia) ratios between the reaction wheel and the platform and are not sufficient for arcsecond-level attitude stabilisation on Cubesat type platforms ( Douglas ⁢ e t a l . 2021 ). Typically, a separate finer control loop is required to correct for the disturbance from within the the optical chain of the telescope itself ( Peri ⁢ e t a l . 2023 ). • Limited aperture and focal lengths: The Cubesat specification defines the exact envelopes within which the complete spacecraft (including the telescope, instruments and avionics) must fit into 1 1 1 https://www.cubesat.org/ . Typically, the largest of Cubesats allow for 12U volume in 2UX2UX3U format where 1U is typically considered a cube with sides of 10 cm. The largest symmetrical telescope aperture that can fit within this volume is about 200 mm in diameter (practically about 185-190 mm might be more realistic). On smaller Cubesats, e.g. 6U (1UX2UX3U), 100 mm aperture is more typical. There have been some attempts to maximize the available collecting area: such as by using a rectangular aperture (e.g. CUTE, Fleming ⁢ e t a l . 2017 or an off-axis primary mirror (e.g. CUBESPEC, Raskin ⁢ e t a l . 2022 ). This restriction in aperture highlights the necessity of being efficient with the gathered photons and to be creative with the science programs. Cubesat based platforms have the potential to be diffraction limited. However, the smaller aperture and limited space envelope also limit the focal length of Cubesat based telescopes. Invariably, this leads to a fairly high plate-scale(of the order of hundreds of arcseconds/per mm) at the image plane; and fairly small pixel size (about 2-4 microns) is required to adequately sample this PSF. Detectors arrays with such small pixels are typically not aimed for scientific observation and therefore (depending on the nature of the science being attempted) might need dedicated facilities for their characterisation before launch. At the same time, use of larger pixel size will cause the PSF to be undersampled. • Size, complexity and reliability: Although smaller in size, Cubesats must operate in a self-sufficient manner in terms of power, communication, onboard computing, battery backup, coarse pointing and other miscellaneous subsystems. Fortunately, there has been significant efforts from commercial companies 2 2 2 https://www.bluecanyontech.com/ 3 3 3 https://hex20.in/ towards availability of standardised Cubesat buses. Similarly, progress is being made towards miniaturizing mission critical components such as reaction wheels, magneto-torquers and star sensors ( Johnston-Lemke ⁢ e t a l . 2011 , Candini ⁢ e t a l . 2012 ). Still, the complexity of Cubesats (that are capable of useful astronomy) remains a challenge and will probably benefit from further standardisation of components and systems as well as collaborative work between the astronomical community and the industry. Keeping these aspects in mind, we introduce a framework of astronomical telescopes based on on-axis afocal optics. The general design considerations are aimed towards suitability of use in a compact Cubesat platform. We discuss advantages and flexibility of such a framework along with a number of example designs and some illustrative science cases. 2 General Principle of Afocal telescopes: (a) Conventional telescope with collimator camera type optics (b) Schematic of an afocal telescope (c) Ray trace of an afocal telescope Figure 1 : Layout of an afocal telescope with a camera: an

Read the complete text