Optimization of Probabilistic Constellation Shaping for Optical OFDM Systems with Clipping Distortion

Thanh V. Pham, Susumu Ishihara · 2025

Read Optimization of Probabilistic Constellation Shaping for Optical OFDM Systems with Clipping Distortion by Thanh V. Pham, Susumu Ishihara (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-07507.txt.

Introduction

In a 2025 paper, Thanh V. Pham and Susumu Ishihara study how to shape signals for light-based wireless links. Optical OFDM sends data on many light subcarriers at once. Probabilistic constellation shaping, which uses some signal points more often than others, boosts efficiency but can raise the signal's peakiness, and peaks get clipped.

The authors study that clipping cost in a direct-current-biased optical system. They pose an optimization: choose the shaping that maximizes channel capacity while accounting for clipping distortion. The problem is non-convex and hard, so they solve it approximately with projected gradient descent. Simulations show the shaped design beats plain uniform signaling, above all when clipping is severe.

Catalog record

CREATORThanh V. Pham, Susumu Ishihara
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-07507

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Optimization of Probabilistic Constellation Shaping for Optical OFDM Systems with Clipping Distortion Thanh V. Pham, Susumu Ishihara Abstract Optical orthogonal frequency-division multiplexing (OFDM) and probabilistic constellation shaping (PCS) have emerged as powerful techniques to enhance the performance of optical wireless communications (OWC) systems. While PCS improves spectral efficiency and adaptability, we show that its integration with optical OFDM can inadvertently increase the peak-to-average power ratio (PAPR) of the signal, exacerbating clipping distortion due to signal clipping. This letter investigates the impact of PCS on the PAPR of direct current-biased optical OFDM (DCO-OFDM) waveforms and proposes an optimization of PCS that maximizes channel capacity, considering clipping distortion. The optimization problem is shown to be complex and non-convex. We thus present a suboptimal yet efficient solving approach based on projected gradient descent to solve the problem. Simulation results demonstrate the superiority of the proposed approach over the conventional uniform signaling, particularly under severe clipping distortion conditions. I Introduction The demand for ultra-high data-rate requirements of 6G wireless communications, coupled with the increasing scarcity of the radio-frequency (RF) spectrum, has motivated research and development of optical wireless communications (OWC) technology. Operating at vast and unlicensed spectrum, OWC systems are capable of offering multi-Gbps transmission rates while not interfering with RF signals [ 1 ] . OWC systems often suffer from inter-symbol interference (ISI) caused by multipath transmissions (especially due to reflections off the walls in indoor scenarios). Traditionally, in RF systems, ISI can be effectively mitigated by employing orthogonal frequency division multiplexing (OFDM). However, conventional OFDM can not be directly applied to OWC systems, as it generates complex-valued and bipolar signals, while OWC systems employing intensity modulation and direct detection (IM/DD) require real-valued, non-negative signals. To bridge this gap, several OFDM variants tailored for optical systems have been proposed, including direct current biased optical OFDM (DCO-OFDM) and asymmetrically clipped optical OFDM (ACO-OFDM) [ 2 ] . These optical OFDM schemes apply Hermitian symmetry to ensure real-valued outputs before the inverse fast Fourier transform (IFFT), followed by techniques such as DC biasing and clipping to produce non-negative time-domain signals. Aside from OFDM, constellation shaping, which optimizes the location and/or the occurrence probability of the constellation points with respect to the channel condition, is a promising technique to improve the performance of communications systems. Optimizations of the location and occurrence probability of the constellation points are respectively known as geometric constellation shaping (GCS) and probabilistic constellation shaping (PCS). While it has been proven that GCS is not practical for commercial systems, PCS is receiving considerable interest recently, particularly in optical fiber communications (OFC), due to the development of the probabilistic amplitude shaping (PAS) architecture [ 3 ] , which significantly simplifies the integration of shaping and coding. Inspired by the success in OFC systems, over the past few years, several studies have investigated the use of PCS for OWC, including free-space optical (FSO) and visible light communications (VLC) systems. For FSO, Elzanaty et al. introduced a PCS-enhanced adaptive coded modulation scheme tailored for FSO backhauling using intensity modulation/direct detection (IM/DD) [ 4 ] . Subsequent works then explored the performance of PCS in VLC systems, for single-user [ 5 , 6 , 7 ] and multi-user [ 8 , 9 ] scenarios. Most previous works considered single-carrier modulations such as on-off keying (OOK) and pulse amplitude modulation (PAM), whereas only [ 5 ] investigated PCS in conjunction with OFDM signaling. Similar to the case of single-carrier modulations, PCS proves advantageous in improving the performance of multi-carrier systems. However, it is important to note that the impact of PCS on the peak-to-average power ratio (PAPR) of OFDM waveforms has not been taken into consideration in [ 5 ] . To the best of our knowledge, there has been no investigation regarding this issue so far. In this study, we argue that, without a proper optimization, PCS can negatively influence the PAPR statistics of OFDM signaling, at least in the case of DCO-OFDM . Specifically, extensive simulations in the later part of the paper show that compared with uniform signaling, PCS statistically incurs higher PAPR. In OWC systems, due to the limited dynamic linear range of the optical front-end devices and the requirement of nonnegative signals induced by intensity modulation, OFDM signals should be properly clipped, which results in clipping distortion. Since the severity of clipping distortion is proportional to the PAPR, employing PCS may lead to an increased clipping distortion. The purpose of this work is to design an optimization of PCS for DCO-OFDM systems considering clipping distortion. Our main contributions are summarized as follows. • Through simulations, we show that compared with uniform signaling, PCS statically incurs a higher PAPR of DCO-OFDM waveforms, thus potentially leading to a worse clipping distortion. • We formulate a PCS optimization problem whose objective is to maximize the signal-to-noise-plus-distortion ratio of a clipped DCO-OFDM signal. The problem is shown to be complex and nonconvex, making it generally difficult to solve optimally. Thus, we present a computationally efficient suboptimal solution based on the projected gradient descent (PGD) and nested bisection methods to solve the problem. II System model II-A DCO-OFDM In this paper, we consider DCO-OFDM systems employing M -ary QAM signaling with N subcarriers ( N>0 and is even) 1 1 1 The same analysis can be readily applied to other optical OFDM variants, such as ACO-OFDM. . As illustrated in Fig. 1 , at the transmitting side, the input bits are mapped onto a probabilistic QA constellation. OWC systems often use intensity modulation/direct detection (IM/DD), which requires that the time-domain signal be real and non-negative. To fulfill the requirement of real-valued time-domain signals, Hermitian symmetry is imposed on the OFDM symbols before performing the Inverse Fast Fourier Transform (IFFT). Let \mathbf{X}=\big[X[0],X[1],\ldots,X[N-1]\big] denote the frequency-domain vector of an OFDM symbol. The Hermitian symmetry on \mathbf{X} implies X[0]=X[N/2]=0 and X[k]=X^{*}[N-k],\quad\text{for }1\leq k\leq\frac{N}{2}-1, (1) where X^{*}[N-k] denotes the conjugate transpose of X[N-k] . The time-domain signal after IFFT is given by x[n]=\frac{1}{\sqrt{N}}\sum_{k=0}^{N-1}X[k]e^{j2\pi kn/N},\quad n=0,1,\ldots,N-1. (2) A cyclic prefix (CP) is then added to the signal for combating inter-symbol interference (ISI) and preserving orthogonality between subcarriers in the presence of multipath fading. Fig. 1 : A block diagram of DCO-OFDM systems. In OWC systems, the optical transmitter (e.g., an LED or a laser) often exhibits a limited linear dynamic range over which the output optical power is linearly proportional to the input current. To ensure an efficient operation of the optical device, the time domain signal x[n] needs to be clipped. Moreover, the clipping process should be performed in the digital domain to efficiently utilize the dynamic range of the digital-to-analog (D/A) converter [ 10 ] . After the conversion, the clipped analog signal is biased by a DC bias to generate a non-negative signal. At the receiving side, the transmitted optical signal is converted back to an electrical signal via a photodiode (PD), which is then transformed to the digital domain using an analog-to-digital (A/D) converter. After the CP removal, the Fast Fourier Transform (FFT) is performed to convert the time-domain signal back into the frequency domain, which is used for demodulation. II-B Impact of PCS on PAPR In multi-carrier modulation schemes such as OFDM, the summation of many subcarriers occasionally

Read the complete text