Production, Quality Assurance and Quality Control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber Journal: Eur. Phys. J. C

The DarkSide-20k Collaboration a,1 {}^{\text{a,1}} · 2025

Read Production, Quality Assurance and Quality Control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber Journal: Eur. Phys. J. C by The DarkSide-20k Collaboration a,1 {}^{\text{a,1}} (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-07226.txt.

Introduction

The DarkSide-20k Collaboration reports in 2025 how it builds and checks the light sensors for a large dark matter detector. The detector will watch a tank of liquid argon for rare flashes from passing particles. Its walls are tiled with silicon sensors that must be uniform and reliable, since the tank will run sealed for years.

The report walks through how the tiles are made, then tested for quality at each stage. Strict checks catch weak tiles before they are built into the chamber, where swaps would be near impossible. The same care in mass sensor checks may serve other large physics builds that need many matched parts.

Catalog record

CREATORThe DarkSide-20k Collaboration a,1 {}^{\text{a,1}}
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE109 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-07226

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Production, Quality Assurance and Quality Control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber Journal: Eur. Phys. J. C The DarkSide-20k Collaboration a,1 {}^{\text{a,1}} Abstract The DarkSide-20k dark matter direct detection experiment will employ a 21 m 21\text{\,}\mathrm{m} silicon photomultiplier (SiPM) array, instrumenting a dual-phase 50 tonnes 50\text{\,}\mathrm{t}\mathrm{o}\mathrm{n}\mathrm{n}\mathrm{e}\mathrm{s} liquid argon Time Projection Chamber (TPC). SiPMs are arranged into modular photosensors called Tiles , each integrating 24 SiPMs onto a printed circuit board (PCB) that provides signal amplification, power distribution, and a single-ended output for simplified readout. 16 16 Tiles are further grouped into Photo-Detector Units (PDUs). This paper details the production of the Tiles and the quality assurance and quality control (QA-QC) protocol established to ensure their performance and uniformity. The production and QA-QC of the Tiles are carried out at Nuova Officina Assergi (NOA), an ISO-6 clean room facility at LNGS. This process includes wafer-level cryogenic characterisation, precision flip-chip bonding, wire bonding, and extensive electrical and optical validation of each Tile. The overall production yield exceeds 83.5%, matching the requirements of the DarkSide-20k production plan. These results validate the robustness of the Tile design and its suitability for operation in a cryogenic environment. ∎ 1 1 1 e-mail: [email protected] 1 Introduction Figure 1 : Picture of a Tile showing the 24 SiPMs, mounted on the top side (Top), and the electronic components, mounted on the bottom side (Bottom). Each SiPM is equipped with three aluminium anode pads, of which one is used for the cryogenic SiPM assessment and the remaining two are used for the wire bonding. The golden PCB cathode pad is also visible. DarkSide-20k (DS-20k) is a Time Projection Chamber (TPC) for dark matter particle searches featuring an active mass of 50\text{\,}\mathrm{t}\mathrm{o}\mathrm{n}\mathrm{n}\mathrm{e}\mathrm{s} of liquid argon from underground sources (UAr) currently under construction at Laboratori Nazionali del Gran Sasso (LNGS) in Italy. The collaboration opted to develop with Fondazione Bruno Kessler (FBK) a new generation of silicon photomultiplier (SiPM) especially optimised for operation at cryogenic temperature ( 80\text{\,}\mathrm{K} ) with reduced noise, and to develop an in-house integration process to produce photo-detectors. These instrument the two large optical planes at the bottom and top of the TPC for a total surface of 21\text{\,}\mathrm{m} . Among the benefits of utilising SiPMs over Photo Multiplier Tubes (PMTs) are their low voltage operation, insensitivity to magnetic fields, and compactness that facilitates covering large areas, while minimising empty spots. Additionally, SiPMs exhibit minimal residual natural radioactivity, which makes them ideal for low-background experiments like DS-20k Aalseth 2018 . At the heart of the DS-20k detector is a dual-phase TPC designed with a vertical electron drift configuration. The TPC is designed as an octagonal prism standing 348\text{\,}\mathrm{cm} tall with an inner diameter of 350\text{\,}\mathrm{cm} . The TPC is filled with low-radioactivity UAr, which serves as the target for Weakly Interacting Massive Particles (WIMPs) Agnes 2018 ; Agnes 2021 ; Acerbi 2025 . Above the liquid argon phase, a gas layer approximately 7\text{\,}\mathrm{mm} thick is maintained. The TPC is enclosed in a stainless steel vessel filled with an extra 36\text{\,}\mathrm{t} of UAr, which serves as the neutron Inner Veto. The stainless steel vessel, the TPC and the Inner Veto are immersed in atmospheric liquid argon housed in a DUNE-like membrane cryostat functioning as the cosmogenic Outer Veto Montanari 2015 . In the liquid argon TPC, light is produced by two processes: the primary liquid argon scintillation (S1) and gas proportional electroluminescence (S2) from ionisation electrons extracted into the gas layer. In DS-20k, both S1 and S2 signals will be detected by arrays of SiPMs mounted on two Optical Planes (OP) positioned on the top and bottom of the TPC’s octagonal barrel. Each OP sits behind an optical window coated with Tetraphenyl butadiene (TPB) and covers an area of approximately 10.5\text{\,}\mathrm{m} . These OPs are equipped with 11.8\text{\,}\mathrm{mm} \times 7.9\text{\,}\mathrm{mm} near-UV sensitive, high-density Cryo NUV-HD SiPMs developed by FBK, further optimised jointly with the DarkSide Collaboration and manufactured by LFoundry S.r.l. Aalseth 2018 ; Acerbi et al. 2017 ; Piemonte et al. 2016 ; Gola et al. 2019 . The SiPMs are arranged into Tiles . Every Tile functions as a module containing 24 SiPMs bonded to the front side of a printed circuit board (PCB). The PCB provides common power distribution to all the 24 SiPMs and includes cryogenic low-noise readout electronics, which deliver the total current from the SiPMs as a single-ended output signal. Therefore, the Tile is a compact, functional photodetector module. A picture of a Tile is shown in Figure 1 . The Inner Veto and the Outer Veto of DS-20k are also instrumented with SiPM-based photosensors integrated into Tiles. In DS-20k, Tiles are assembled into Photo-Detector Units (PDUs) to further simplify the process of assembling and reading out the OP. A PDU consists of 16 Tiles mounted on a custom motherboard, where they are aggregated in groups of four to give four readout channels per PDU. All Tiles within a single PDU receive a common bias voltage. Each PDU generates four signal outputs, with each output representing the summed signals of each quadrant. The PDU will be the subject of a future paper. Tiles are manufactured within the Nuova Officina Assergi (NOA) facility, located at INFN-LNGS, an ISO-6 clean room packaging space spanning 353\text{\,}{\mathrm{m}}^{2} Consiglio et al. 2024 . This facility is equipped with state-of-the-art production machinery for evaluating wafer quality and assembling SiPMs into Tiles. A batch of 260,000 SiPMs derived from 1400 LFoundry S.r.l. wafers underwent tests at NOA between 2023 and 2025 Acerbi, F. & DarkSide-20k Collaboration 2025 . The SiPMs that successfully meet quality control standards are assembled into Tiles. 8448 Tiles among the ones that exhibit good quality are intended for use within the 528 PDUs of the DS-20k TPC. This paper describes the production of the DS-20k TPC Tiles in NOA and the Quality Assurance and Quality Control (QA-QC) procedures accompanying the production. The paper is organised as follows: section 2 details the Tile’s design; section 3 describes the Tile production process flow in NOA; section 4 explains the QA-QC protocols; section 5 highlights the most relevant results. 2 The Tile: a compact SiPM-based photodetector Figure 2 : PCB 3D rendering showing the electronic components on the bottom side of the Tile. Figure 3 : Schematic of the Tile electronics: it consists of 24 1\text{\,}{\mathrm{cm}}^{2} -SiPMs arranged in a 4s6p configuration, with 6 parallel branches of 4 SiPMs in series. This arrangement reduces capacitance for improved bandwidth while simplifying the readout with a single output signal (SiPM signal in the red shade). A precision voltage divider provides 1/4 of the input bias ( \mathrm{V}_{\mathrm{bias}} ) to all the SiPMs. The divider is composed of a network of 10\text{\,}\mathrm{M\SIUnitSymbolOhm} resistors ( \mathrm{R}_{\mathrm{d1}} to \mathrm{R}_{\mathrm{d4}} , and \mathrm{R}_{1} to \mathrm{R}_{19} , Passive \mathrm{V}_{\mathrm{bias}} Divider in the orange shade), coupled with 100\text{\,}\mathrm{nF} parallel capacitors ( \mathrm{C}_{1} to \mathrm{C}_{9} , \mathrm{V}_{\mathrm{bias}} Filter in the green shade) acting as a low-pass filter and charge storage. A 10\text{\,}\mathrm{k\SIUnitSymbolOhm} filter resistor is added in series to the divider, resulting in an overall 40.01\text{\,}\mathrm{M\SIUnitSymbolOhm} impedance. An additional 143\text{\,}\mathrm{\SIUnitSymbolOhm} series resistance on each parallel branch ( \mathrm{R}_{\mathrm{Br1}} to \mathrm{R}_{\mathrm{Br6}} ) provides the necessary frequency compensation for the readout amplifier. Figure 4

Read the complete text