3D Steering and Localization in Pipes and Burrows Using an Externally Steered Soft Growing Robot
Yimeng Qin, Jared Grinberg, William Heap, and Allison M. Okamura · 2025
Read 3D Steering and Localization in Pipes and Burrows Using an Externally Steered Soft Growing Robot by Yimeng Qin, Jared Grinberg, William Heap, and Allison M. Okamura (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-07225.txt.
Introduction
Yimeng Qin, Jared Grinberg, William Heap, and Allison Okamura present a soft growing robot that can steer through pipes and burrows, in a 2025 paper. Vine robots grow by turning their own skin inside out at the tip, which lets them slip through tight, twisting spaces with little rubbing. Steering them around sharp 3D bends, though, has been a weak point.
Their design keeps the body a simple tube and puts the steering gear outside, on a tip mount. The mount bends the growth direction in three degrees of freedom and tracks where the tip has gone. Tests in pipe-like and burrow-like paths show the robot taking branches and sharp turns. Such robots could inspect drains, tunnels, and rubble where rigid machines cannot go.
Catalog record
| CREATOR | Yimeng Qin, Jared Grinberg, William Heap, and Allison M. Okamura |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 47 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-07225
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
3D Steering and Localization in Pipes and Burrows Using an Externally Steered Soft Growing Robot Yimeng Qin, Jared Grinberg, William Heap, and Allison M. Okamura Abstract Navigation and inspection in confined environments, such as tunnels and pipes, pose significant challenges for existing robots due to limitations in maneuverability and adaptability to varying geometries. Vine robots, which are soft growing continuum robots that extend their length through soft material eversion at their tip, offer unique advantages due to their ability to navigate tight spaces, adapt to complex paths, and minimize friction. However, existing vine robot designs struggle with navigation in manmade and natural passageways, with branches and sharp 3D turns. In this letter, we introduce a steerable vine robot specifically designed for pipe and burrow environments. The robot features a simple tubular body and an external tip mount that steers the vine robot in three degrees of freedom by changing the growth direction and, when necessary, bracing against the wall of the pipe or burrow. Our external tip steering approach enables: (1) active branch selection in 3D space with a maximum steerable angle of 51.7°, (2) navigation of pipe networks with radii as small as 2.5 cm, (3) a compliant tip enabling navigation of sharp turns, and (4) real-time 3D localization in GPS-denied environments using tip-mounted sensors and continuum body odometry. We describe the forward kinematics, characterize steerability, and demonstrate the system in a 3D pipe system as well as a natural animal burrow. I Introduction Navigation and inspection in confined, tortuous, and tubular spaces, such as tunnels and pipes, are important to maintain civil infrastructure and ensure the safety of users and customers. Pipe systems are innumerous and critical for the transportation of essential resources such as freshwater, wastewater, oil, and gas. Worldwide, billions of dollars are spent annually to inspect, repair, and replace pipe systems, and hundreds of injuries and deaths occur each year due to pipe damage [ 1 ] [ 2 ] [ 3 ] . Gathering data from the interior of pipe systems is needed to detect pipe damage and determine when a pipe needs to be repaired or replaced. However, the interior of pipe systems is often inaccessible to humans and impermeable to electromagnetic signals, thus requiring mechanical systems to access and inspect them. Although external scanning methods such as ultrasonic or radiographic inspection are sometimes used to look for pipe damage, their effectiveness is limited when pipes are buried or surrounded by dense infrastructure or equipment. Moreover, these external methods cannot access or detect internal features such as internal corrosion, blockages, or cracks initiated from the inside. Fig. 1: Conceptual illustration of a complex pipe system showcasing various existing types of in-pipe inspection robots, including floating robot [ 4 ] , smart PIGs [ 5 ] , crawler/screw robots [ 6 ] , robotic scopes [ 7 ] [ 8 ] [ 9 ] , wheeled/tracked robots [ 10 ] , worm/snake robots [ 11 ] , and vine robots. The robot types ①-⑥ cannot navigate beyond the location shown in the drawing. (The conceptual representations of the all robots were generated using AI tools.) TABLE I: Comparison of Existing In-Pipe Inspection Robots # Robot Type Propul- sion Agility Adapt- ability Anti- Gravity ① Floating Robot [ 4 ] Low Low High Low ② Smart PIG High Moderate Low High ③ Crawler/Screw Robot [ 12 ] [ 13 ] Medium Low Medium High ④ Robotic Scope [ 7 ] [ 9 ] Low High High Low ⑤ Wheeled/Tracked Robot [ 10 ] Medium Low Low Low ⑥ Worm/Snake Robot [ 14 ] [ 15 ] Medium High Medium High ⑦ Vine Robot High High High High Fig. 2: A comparison of different vine robot steering methods. While length-independent approaches address the limitations of length-dependent methods such as tendon-based steering and actuator-based active control, internal steering devices still face the challenge of overcoming the vine robot’s resistance to bending. In contrast, the external tip steering method we propose enables large, controlled curvature without deforming the entire body, offering a scalable and efficient solution for operation in confined environments. As illustrated in Fig. 1 , while numerous mechanical and robotic systems have been developed and deployed for pipe inspection, they are still limited in their use cases. Commercially available in-pipe devices, such as pipeline inspection gauges or gadgets (PIGs), borescopes, rovers, and drones, are all limited by some combination of insufficient propulsion force, lack of ability to navigate pipes that branch, inability to travel within varying pipe diameters, and difficulty with traveling while opposing gravity [ 16 ] . To address these limitations, various novel robots have been developed to perform in-pipe inspections [ 17 ] . Those robot designs can be categorized based on the propulsion mechanism as robotic scopes [ 7 ] [ 9 ] , wheeled/tracked robots [ 10 ] , crawler/screw robots [ 12 ] [ 13 ] , worm-like/snake robots [ 14 ] [ 15 ] , and passive floating robots [ 4 ] . As summarized in Table I , the comparison of existing in-pipe inspection robots is based on four key performance metrics. Propulsion refers to a robot’s ability to actively generate motion within the pipe environment. Agility explains how effectively a robot can maneuver through complex geometries such as bends, branches, and narrow sections. Adaptability describes the robot’s capability to conform to or traverse pipes with varying diameters, materials, or surface conditions. Lastly, anti-gravity performance indicates a robot’s ability to move against gravity, such as climbing vertically or navigating inclined sections of pipe. Table I highlights the advantages of different robot designs. For example, worm-like/snake robots and robotic scopes can perform delicate branch selection using a high-degree-of-freedom whole-body design or highly maneuverable robot tip. Crawler/screw robots and worm-like/snake robots use a wall-pressing friction-based motion, in which robots firmly press against the pipe walls to navigate in anti-gravity directions. These robots also commonly use expanding structures to accommodate a range of different pipe diameters. However, these prior robot designs face trade-offs between maneuverability, adaptability, and mechanical complexity. High degree-of-freedom designs typically require bulky actuation systems and complex control, which can limit their scalability or deployment in long or narrow pipe systems. Friction-based motion strategies can generate wear, require high energy input, and struggle in slippery or irregular-walled environments. Furthermore, rigid-body designs lack the compliance needed to navigate sharp turns or diameter-changing pathways, increasing the risk of mechanical jamming or structural damage. Soft robots, due to their lightweight material, flexibility, and adaptability, can perform minimally invasive inspection tasks in confined environments [ 18 ] . Vine robots, a type of pneumatic soft growing continuum robot, transport material from a fixed base and evert it at the tip driven by internal fluid pressure [ 19 ] . This mechanism offers many advantages over other robot types for navigating tight spaces. The vine robot can extend itself into torturous paths reaching significant lengths; travel with large propulsion force but negligible friction with respect to the environment; squeeze into apertures fractionally smaller than the body diameter; and create a self-supported continuum body to transport tail material and sensors [ 20 ] [ 21 ] . To navigate complex pipe networks, the vine robot’s