Thickness-Dependent Spin Pumping in YIG/ W 90 T i 10 W_{90}Ti_{10} Bilayers
M. Hachem, Z. Harajli, S. Isber, M. Haidar · 2025
Read Thickness-Dependent Spin Pumping in YIG/ W 90 T i 10 W_{90}Ti_{10} Bilayers by M. Hachem, Z. Harajli, S. Isber, M. Haidar (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-06831.txt.
Introduction
Hachem and three co-authors present a 2025 study of spin pumping in layered films of a magnetic insulator and a tungsten-titanium alloy. Spin pumping injects a pure spin current from the magnet into the metal, a basic move in spintronics. The team varied both layer thicknesses and measured resonance damping. A thin alloy layer clearly raised the damping of thin magnet films, showing efficient spin injection.
The transfer strength peaked at a 3-nanometer alloy layer, then fell for thicker ones. The authors blame a structural phase change in the alloy that weakens its spin-orbit grip. Titanium doping also lowered transfer compared with pure tungsten films. The lesson for device builders: in spin transport, crystal phase and alloy recipe matter as much as thickness.
Catalog record
| CREATOR | M. Hachem, Z. Harajli, S. Isber, M. Haidar |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 19 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-06831
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Thickness-Dependent Spin Pumping in YIG/ W 90 T i 10 W_{90}Ti_{10} Bilayers M. Hachem, Z. Harajli, S. Isber, M. Haidar Abstract We investigate the spin pumping efficiency in Y I G / W 90 T i 10 YIG/W_{90}Ti_{10} bilayers by measuring the thickness dependence of both the YIG and WTi layers using broadband ferromagnetic resonance (FMR) spectroscopy. The deposition of a 5-nm WTi layer leads to enhanced Gilbert damping in thinner YIG films, indicating efficient spin current injection. From the spin pumping contribution to the damping of the YIG/WTi bilayer, we determine an effective spin mixing conductance of 3.3 × 10 18 m − 2 3.3\times 10^{18}~\mathrm{m^{-2}} for the 5-nm WTi layer. Further measurements with varying WTi thickness reveal a non-monotonic dependence of spin mixing conductance, peaking at 4.2 × 10 18 m − 2 4.2\times 10^{18}~\mathrm{m^{-2}} for a 3-nm WTi layer. This behavior is attributed to a structural phase transition from the high-spin–orbit β \beta -phase to the less efficient α \alpha -phase in thicker WTi layers. Furthermore, comparative analysis with YIG/W bilayers shows that Ti doping significantly reduces g eff ↑ ↓ g^{\uparrow\downarrow}_{\text{eff}} . These findings highlight the critical role of alloy composition and structural phase in tuning spin transport for spintronic applications. I Introduction The generation and injection of pure spin currents—i.e., spin angular momentum transport without an accompanying charge current— generated via the spin Hall effect Hirsch 1999 ; Dyakonov and Perel 1971 has become increasingly critical for potential applications of spintronic devices Dieny et al. 2020 . Bilayer structures comprising a ferromagnetic (FM) layer and a nonmagnetic (NM) layer with strong spin–orbit coupling represent promising platforms for the conception of tunable spin currents via the spin pumping mechanism Tserkovnyak et al. 2005 ; Y. Kajiwara et al. 2010 ; Ando et al. 2011 ; Balinsky et al. 2015 . In spin pumping, spin currents are dynamically injected from the FM layer into the NM layer through the excitation of magnetization precession, achieved via ferromagnetic resonance (FMR) Mosendz et al. 2010 ; Shaw et al. 2012 . Recently, extensive research works have investigated the spin pumping behavior in FM/NM heterostructures employing both metallic Nan et al. 2015 ; Ranjbar et al. 2014 ; Liu et al. 2012a ; Haidar et al. 2021 and insulating ferromagnets Wang et al. 2013 ; Sun et al. 2013 ; Heinrich et al. 2011 ; Haidar et al. 2016 ; Haidar et al. 2015 . In these devices, it is essential to determine key parameters include the spin Hall angle ( \theta_{SH} ) Wang et al. 2014a ; Rojas-Sánchez et al. 2014 ; Rezende et al. 2013 , which quantifies the efficiency of spin-to-charge current conversion, and the inverse spin Hall voltage Yoshino et al. 2011 ; Liu et al. 2012b ; Balinsky et al. 2016 ; Tiwari et al. 2017 ; Sagasta et al. 2018 , which reflects the magnitude of charge current generated from the injected spin current via spin–orbit mechanisms. The transport of the spin current is also known to be strongly influenced by the structural and interfacial properties of the FM/NM interface Nakayama et al. 2012 ; Jungfleisch et al. 2013 ; Harajli et al. 2024 . The spin mixing conductance ( g^{\uparrow\downarrow}_{\text{eff}} ), which characterizes the efficiency of spin angular momentum transfer across the FM/NM interface, is another important parameter in the current conversion Tserkovnyak et al. 2002 ; Zhang et al. 2011 . Several studies conducted to enhance the spin mixing conductance g^{\uparrow\downarrow}_{\text{eff}} to increase the spin current density transmitted into nonmagnetic (NM) materials Papaioannou et al. 2013 ; Wang et al. 2019 . Notable improvements have been achieved by modifying the growth conditions such as temperature Bansal et al. 2018 , oxygen pressure Demasius et al. 2016 , introducing an ultrathin interlayer(e.g. Copper or hafnium Pai et al. 2014 ; Mazraati et al. 2018 or anti-ferromagnet Wang et al. 2014b ; Hahn et al. 2014 ), engineering the interface morphology Liu et al. 2012a ; Jungfleisch et al. 2013 . Beyond traditional heavy metals, research has also investigated materials with varying spin–orbit coupling strengths, such as alloying heavy metals NixCu_{1-x} Keller et al. 2019 , PtAu Obstbaum et al. 2016 ; Zhu et al. 2018 to strengthen the generation of spin current. Tungsten is one of the most widely used heavy metals in spintronic devices due to its superior properties compared to other heavy metals. It has been shown that the spin Hall angle is significantly enhanced when tungsten is in the \beta -phase Mazraati et al. 2016 ; Zahedinejad et al. 2018 ; Bansal et al. 2018 ; Jhajhria et al. 2019 , and when it is oxidized Demasius et al. 2016 . The quest to enhance spin pumping in tungsten remains ongoing, and one approach has involved alloying W with other metals such as Tantalum (Ta), Copper, or Molybdenum Sui et al. 2017 ; Kim et al. 2020 . Here, we explore spin pumping in titanium-doped tungsten ( W_{90}Ti_{10} ) as a heavy metal layer. Using broadband ferromagnetic resonance (FMR), we systematically investigate YIG/WTi bilayers by varying both the YIG and WTi layer thicknesses. Our measurements reveal that spin pumping is enhanced in thinner YIG films. Furthermore, the spin-mixing conductance exhibits a non-monotonic dependence on WTi thickness, reaching a maximum value of g^{\uparrow\downarrow}_{\text{eff}}=4.2\times 10^{+18}m^{-2} at a WTi thickness of 3 nm which is attributed to a phase transition from the high-spin–orbit \beta -phase to the less efficient \alpha -phase of WTi for thicker layers. Figure 1: (Color online) (a) (a) Schematic illustration of the broadband ferromagnetic resonance (FMR) measurement setup, showing the thin-film sample orientation, the applied in-plane magnetic field ( \mu_{0}H ), and the YIG/WTi bilayers. (b) Representative FMR spectra of a YIG film recorded at frequencies ranging from 5 to 16\text{\,}\mathrm{G}\mathrm{H}\mathrm{z} in 1\text{\,}\mathrm{G}\mathrm{H}\mathrm{z} increments. (c) Zoomed-in FMR spectrum at 14\text{\,}\mathrm{G}\mathrm{H}\mathrm{z} with a fitted curve (solid line) using Eq. (1). (d) Frequency-field dispersion relation for all samples.(e) Variation of linewidth versus frequency for all pure YIG samples. II Experiments We selected yttrium iron garnet (YIG , Y_{3}Fe_{5}O_{12} ) as the ferromagnetic (FM) layer due to its ultra-low magnetic damping. YIG thin films were grown on single-crystal (111)-oriented gadolinium gallium garnet (GGG, Gd_{3}Ga_{5}O_{12} ) substrates using pulsed laser deposition (PLD). A YIG target was ablated with a 248 nm KrF excimer laser operating at 400 mJ pulse energy and 10 Hz repetition rate. Depositions were performed at a substrate temperature of 750 ∘ C in 20 mTorr oxygen pressure, with a base chamber pressure of 10^{-7} mbar. More details about the deposition protocol can be found Haidar et al. 2023 . Two series of YIG films were prepared. In Series I, the YIG film thicknesses were varied by adjusting the deposition time to achieve different thicknesses ranging from 20 to 220 nm. The thickness of the YIG films was determined using a profilometer. In Series II, all films were grown with identical thicknesses by fixing the deposition time at 50 minutes. For the spin pumping study, a thin ( W_{90}Ti_{10} ) alloy layer of variable thickness was sputtered onto each YIG film. We examine the effect of Ti doping in the W matrix