Probing microsecond dynamics of disperse nanoparticles at oil-water interfaces using nanometer localization precision total-internal-reflection dark-field microscopy
A. Y. Schumacher · 2025
Read Probing microsecond dynamics of disperse nanoparticles at oil-water interfaces using nanometer localization precision total-internal-reflection dark-field microscopy by A. Y. Schumacher (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-06238.txt.
Introduction
Anne Schumacher, writing alone in 2025, built a fast microscope to watch tiny particles at the border between oil and water. Such borders matter in industry and science, yet what drives particles to stick, and how mixes of particles and soaps behave there, stayed open.
Her scope can place a particle within a nanometer and catch motion in microseconds. She compared gold particles of three sizes and then added a soap-like agent. Without it, particles stuck for good. With it, sticking could reverse, and larger particles moved faster than smaller ones, the reverse of the plain case. Some particles also switched between stable depths over time. She proposes size-based barriers at soapy borders.
Catalog record
| CREATOR | A. Y. Schumacher |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-06238
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Probing microsecond dynamics of disperse nanoparticles at oil-water interfaces using nanometer localization precision total-internal-reflection dark-field microscopy A. Y. Schumacher Abstract Particles at fluid-fluid interfaces have a wide range of important applications in industry, technology and science. Questions remain about what governs adsorption dynamics and inter-particle interactions, and how mixtures – both of different-sized particles, and particles and surfactants – behave. I probe the dynamics of nanoparticles at oil-water interfaces using high-speed total-internal-reflection dark-field ( tir-df ) microscopy, comparing gold particles of diameters 20, 40 and 80 nm, and investigating the effect of an added surfactant. I built a tir-df microscope with a spatiotemporal resolution of up to 1 nm at 20 μ \mu s, and characterized the particle motion by direct imaging for the diffusive motion within the interfacial plane, and attenuation of light scattering and in-plane motion for out-of-plane motion. The addition of surfactant was found to qualitatively alter the interaction between the particles and the interface: Adsorptions became reversible and the size trend in diffusivity was reversed (larger particles diffused faster than smaller ones). The combination of this and the rarity of adsorption events of larger particles leads me to propose size-dependent barriers to adsorption at surfactant interfaces. In addition, at surfactant interfaces, many particles’ diffusive behavior changed over the course of a trajectory, indicating several different immersion states that are stable on the experimental timescale ( ≈ \approx 1 s). This study shows that there remain qualitatively new dynamics of nanoparticles at oil-water interfaces to be explored. These dynamics can only be resolved at a high spatial resolution, and many of them only at high imaging speed, underlining the importance of novel imaging approaches probing the barriers of achievable spatiotemporal resolution. 1 Introduction Micro- and nano-sized particles are known to self-assemble into structured layers at liquid-liquid interfaces. This behavior has been used to synthesize thin films as photonic materials or microelectronic device components that would otherwise be very difficult or impossible to make. [ 1 , 2 ] The thermodynamic driving force of particle adsorption to the interface is a reduction in interfacial tension. [ 3 , 4 ] In addition to films, this effect can be used to stabilize emulsions (so-called Pickering emulsions), another class of materials that is highly relevant in industry. [ 5 , 6 , 7 ] Once at the interface, inter-particle forces are determined by a complex interplay of electrostatics and geometric considerations, as well as particle shape, concentration and the concentration of other additives such as salt. [ 8 , 9 ] The adsorption energy calculated from changes in interfacial energies increases quadratically with particle size, [ 3 ] and is often hundreds or even millions of times the thermal energy even for micron-sized particles. However, relaxation towards the equilibrium contact angle once they breach the interface can be slow, suggesting metastable states and hinting at the possibility of kinetic control. [ 10 ] For nanoparticles, the equilibrium adsorption energy is closer to the thermal energy, and for some combinations of particle size, temperature and interfacial energies between the three phases (two fluids and the particle), adsorbed particles can move perpendicular to the interface and even desorb [ 11 ] (see Fig. 1 ). This effect enables size-selective particle assembly in 3D, with smaller particles being replaced by larger ones at the interface in a dynamic system. [ 4 ] (a) (b) (c) Figure 1 : Out-of-plane dynamics of particles at liquid-liquid interfaces and selected effects of surfactants on them. a) Schematic trajectory of a particle at an oil-water interface, 2d projection in inset. Immersion angle and equilibrium immersion angle \theta and \theta_{0} , and the force F_{\textrm{ads}} resulting from a particle not being at the equilibrium immersion angle. b) Adsorption of a particle to a surfactant-laden interface (before and after). The adsorption energy is determined by a change in interfacial energy, with terms from changing interface areas are calculated via E_{\textrm{i}}=\gamma_{\textrm{i}}A . \gamma_{\textrm{i}} is the interfacial tension and A is the interfacial area. c) Addition of surfactant makes it thermodynamically and kinetically more favorable for the particle in case (a) to move away from its equilibrium adsorption angle, where the equilibrium angle is furthermore altered by this addition. Besides allowing for desorption and the increased control that comes with that, nanoparticles are of special interest because of their size. A significant fraction of their atoms are located at the surface, which qualitatively changes their material properties compared to larger-scale matter. [ 12 ] Observed effects include increased chemical reactivity (see for example refs. [ 13 ] and [ 14 ] ), tunable and intensified electromagnetic response (e.g. ref. [ 15 ] ) and improved (bio-)mechanical properties (e.g. refs. [ 16 , 17 ] ). The use of liquid-liquid interfaces is a potentially very simple technique for manufacturing these important materials, and this has become an important topic in materials science. [ 18 ] However, the same size-related effects that give nanoparticles interesting properties can complicate the description of their behavior: Classical theories assume non-polarizability and spherical shape of particles and negligible size of solvent molecules compared to the particle, and while these assumptions often hold for microparticles, they break down for nanoparticles. [ 19 ] The dynamics of nanoparticles are also more difficult to access experimentally because of nanoparticles’ faster motion and lower scattering and fluorescence intensity, and hence are not as well characterized. Understanding the dynamics of nanoparticles at the interface would aid in controlling synthesis processes, giving access to new materials and the understanding of quantum and size-related effects that become visible at these scales. In this work, I characterize the out-of-plane motion of disperse nanoparticles at oil-water interfaces in the absence and presence of an added surfactant, n -dodecyl- \beta - D -maltoside ( ddm ). In avoiding inter-particle interactions, I aim to gain insights into the interaction between particles and the interface. The surfactant is expected to enhance the stability of existing metastable immersion states and shift the desorption potential towards larger particle sizes [ 20 ] , which are easier to image. Surfactants have also, however, been shown to alter particle wetting properties [ 21 ] and lead to stronger particle adsorption via cooperative binding effects. [ 22 ] The most reliable way to study the dynamics of nanoparticles at interfaces is to observe them directly (single-particle tracking). A relatively non-invasive way to achieve this is to probe with electromagnetic radiation in the visible spectrum, i.e. with an optical microscope. Atomic force microscopy (AFM) and electron microscopy have a higher spatial resolution, but are not suitable because the liquid-liquid interface is inaccessible. Furthermore, the time resolution of AFM is too low. Typical methods for single-particle tracking include tirf microscopy [ 23 , 24 ] , which yields high signal-to-noise ratios by suppressing background signals resulting from scattering, allowing small particles to be tracked accurately. However, fluorescence methods [ 25 ] are limited in localization precision and time resolution by bleaching and photoblinking. In addition, single quantum emitters have a limited photon emission rate due to the finite lifetime of the excited state. The length scale that is relevant for particle self-assembly is on the order of the particle diameter or smaller, which imposes a requirement