Electromagnetic Boundary Conditions for Space–time Interfaces
J. Gratus, S. A. R. Horsley, M. W. McCall · 2025
Read Electromagnetic Boundary Conditions for Space–time Interfaces by J. Gratus, S. A. R. Horsley, M. W. McCall (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-05889.txt.
Introduction
When light meets a boundary, rules are needed to say how the field on one side joins the field on the other. Gratus, Horsley, and McCall write those rules for the hardest case: a boundary that moves through space and time at once. The media on either side may themselves respond with delay in both space and time. Their treatment works in four-dimensional spacetime and covers moving surfaces and ultra-thin metasurface layers.
The familiar rules for a boundary fixed in space, or flashing in time, fall out as special cases. The authors argue that their conditions are the most general ones that still respect causality, the rule that effects cannot precede causes, and linearity. The result gives designers of time-varying optical devices a single frame for checking what a spacetime interface may and may not do to a passing wave.
Catalog record
| CREATOR | J. Gratus, S. A. R. Horsley, M. W. McCall |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 66 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-05889
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Electromagnetic Boundary Conditions for Space–time Interfaces J. Gratus, S. A. R. Horsley, M. W. McCall Abstract We give a general family of electromagnetic boundary conditions applicable to arbitrary space–time interfaces between electromagnetic media, which include the known space–only and time–only boundary conditions as special cases. These boundary conditions describe a broad class of electromagnetic interfaces, including surfaces in arbitrary motion, ultra-thin (metasurface) media, and cases where the media on one or both sides of the boundary can be both spatially and temporally dispersive. Our approach utilizes 4-dimensional spacetime and addresses the question of how, and in what ways, an electromagnetic field may be connected across a 3-dimensional hypersurface. We show that our proposed boundary conditions are the most general conditions consistent with causality and linearity. I Introduction Electromagnetic (EM) wave propagation in bulk materials is nearly always described in terms of a set of constitutive relations. These determine the displacement field, \bm{D} and magnetic flux density, \bm{B} , in terms of the electric \bm{E} and magnetic \bm{H} fields, fixing both the polarization state and wave speed within the medium Mackay and Lakhtakia 2019 . However, at the boundary of any such material, we must apply boundary conditions to connect the internal field with the outside world. When, for example, such a bulk three–dimensional material is reduced to an ultra–thin two dimensional sheet, it becomes awkward to use the constitutive relations at all. In this case it is simpler to characterize the material in terms of a boundary condition (BC), connecting the field vectors on either side of the sheet. Although there has been significant work deriving these BCs for thin, static sheets of material (often practically realised as metasurfaces Achouri et al. 2015 ), recent work on time–varying metamaterials and metasurfaces Galiffi et al. 2022 has opened up the possibility of more general, space–time interfaces Taravati and Eleftheriades 2021 . This leads to the natural question of what BC we should use to characterize a space–time metasurface. In four–dimensional language: in what ways can we connect the EM field across an arbitrary 3–dimensional hypersurface? Here we answer this question, providing the general set of BCs, special cases of which can connect the field across any space–time interface. time Space {\bm{p}} U_{\bm{p}} (a) time Space {\bm{p}} U_{{\bm{p}}} (b) Figure 1 : Causality and space–time boundaries: (a) An initially uniform homogeneous medium simultaneously changes its constitutive parameters within a bounded region (indicated as a grey rectangle), before the constitutive parameters revert back to their original form. The boundary of the grey region (blue/green), \Sigma , consists of the two spacelike hypersurfaces arising from the temporal change, plus the spatial boundary of the finite region. Note that, for a point {\bm{p}} on the second spacelike boundary there is only a part of the boundary, U_{\bm{p}} (green) which is both in \Sigma and in the past lightcone of {\bm{p}} . (b) Example showing that the EM BCs need not be applied between two bulk media. For example, here a surface is uniformly “switched on” at a particular time, moves outwards symmetrically in both directions, before moving inwards and finally “switching off”. In both cases U_{p} is not causally connected to {\bm{p}} via paths inside \Sigma . This means that information cannot propagate solely within the boundary from U_{\bm{p}} to {\bm{p}} , implying purely local boundary conditions. Of course information can always propagate through the bulk of the medium, such that the fields at {\bm{p}} depend on all points in the past light cone, including U_{\bm{p}} . time Space {\bm{p}} J^{\Sigma}(p) Figure 2 : Even though much of the boundary depicted lies in the past light cone of p , only the red part is in J^{\Sigma}(p) . i.e. surface polaritons which influence p can only be generated in J^{\Sigma}(p) Despite originating in earlier work on EM frequency selective surfaces Munk 2005 , the metasurface concept is now ‘wave agnostic’ in the sense that such an effective BC can be applied to modify the propagation of any linear disturbance: acoustic Assouar et al. 2018 , elastic Chen et al. 2022 , electromagnetic Chen et al. 2016 , or even thermal Wang et al. 2021 . Here we discuss only EM metasurfaces, where a four–dimensional language is most natural. There are several effective EM BCs that can characterise a metasurface Achouri and Caloz 2021 : sheet transition conditions Tretyakov 2003 ; Wu et al. 2018 ; Lebbe et al. 2023 , polarizability Holloway et al. 2009 ; Zalus̆ki et al. 2016 , or surface impedance Senior and Volakis 1995 ; Tretyakov 2003 ; Maci et al. 2011 , with the latter being similar to Robin’s BC Gustafson and Abe 1998 . For a static surface, Ref. Lindell and Sihvola 2017 considered the most general linear, local BCs that can describe any stationary metasurface. These BCs need not conserve energy, potentially describing PT-symmetric or generally non–Hermitian metasurfaces with designed distributions of loss and gain Fleury et al. 2014 ; Tapar and Kishen 2021 ; Y. et al. 2022 . However, more recently space–time varying surfaces have been discussed and experimentally investigated Zhang et al. 2018 ; Li et al. 2020 ; Wang et al. 2020 , including quantum effects Oue et al. 2023 and the demonstration of synthetic motion Harwood et al. 2024 . Here an elementary concept is the space–time interface Caloz and Deck-Léger 2020 ; Caloz and Deck-Léger 2019 ; Li et al. 2023a (also implicit in Milton’s ‘field patterns’ Milton and Mattei 2017 ), and it is not obvious how to adapt the aforementioned BCs to this situation, existing discussions often performing calculations, case–by–case. For instance, Mostapha et al. Mostafa et al. 2024 have given a comprehensive review of the BCs applied to uniform anisotropic media that are abruptly modulated, and Li et al Li et al. 2022 considered nonreciprocity for temporal boundaries in an anisotropic medium, analysing the temporal analog of a Faraday rotator in abruptly switched parameters in a magnetoplasma. Meanwhile Caloz et al. Caloz et al. 2022 considered generalized space-time engineered isotropic metamaterials. Their classification noted that while conservation of \bf E and \bf H (respectively \bf D and \bf B ) along purely spatial (temporal) interfaces, the BCs for uniformly moving interfaces modify both spatial and temporal frequencies. They also noted that more general (accelerated) interface motions may be better described within the framework of differential geometry. Here we use the setting of four–dimensional space–time to find the general set of BCs appropriate for space–time interfaces. Fig. 1 illustrates a typical case, where a set of BCs (the boundary in each case is indicated in blue) must be applied to connect the EM field between different space–time regions where the constitutive parameters may or may not be different. Note that, unlike a conventional time–independent boundary, we have the interesting possibility that the past light cone of a given point, \bm{p} on the boundary may be causally connected to only a portion of the past boundary that depends on its motion. Points on a time boundary for instance cannot be causally connected to one another at all. This is unlike a space–boundary, where every point on the boundary is causally connected to its previous state. We later consider dispersive boundaries where