Assessing Linear Control Strategies for Zero-Speed Fin Roll Damping

Nikita Savin, Elena Ambrosovskaya, Dmitry Romaev, Anton Proskurnikov · 2025

Read Assessing Linear Control Strategies for Zero-Speed Fin Roll Damping by Nikita Savin, Elena Ambrosovskaya, Dmitry Romaev, Anton Proskurnikov (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-05867.txt.

Introduction

Nikita Savin, Elena Ambrosovskaya, Dmitry Romaev, and Anton Proskurnikov assess linear control for zero speed fin roll damping in two thousand twenty-five. Ships at rest or slow speed lose the lift that damps roll. A Navis system uses two fins that drag and oscillate to push back. That drag based act works even when the hull stands still.

Their control design stays linear in its core structure. Nonlinear drag forces and actuator limits are still counted in the loop. A high fidelity vessel model built for hardware tests hosts the runs. Simulations show the scheme damps roll well in that setting.

Catalog record

CREATORNikita Savin, Elena Ambrosovskaya, Dmitry Romaev, Anton Proskurnikov
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-05867

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Assessing Linear Control Strategies for Zero-Speed Fin Roll Damping Email: {n.savin,e.ambrosovskaya,d.romaev}@navis.spb.ru, [email protected] Nikita Savin, Elena Ambrosovskaya, Dmitry Romaev, Anton Proskurnikov Abstract Roll stabilization is a critical aspect of ship motion control, particularly for vessels operating in low-speed or zero-speed conditions, where traditional hydrodynamic fins lose their effectiveness. In this paper, we consider a roll damping system, developed by Navis JSC, based on two actively controlled zero-speed fins. Unlike conventional fin stabilizers, zero-speed fins employ a drag-based mechanism and active oscillations to generate stabilizing forces even when the vessel is stationary. We propose a simple linear control architecture that, however, accounts for nonlinear drag forces and actuator limitations. Simulation results on a high-fidelity vessel model used for HIL testing demonstrate the effectiveness of the proposed approach. keywords Roll damping, zero-speed fin stabilizers, ship motion control, stability 1 Introduction Roll damping is a long‑studied problem in ship motion control – essential on passenger vessels, where comfort is paramount, and equally critical on commercial and specialized ships, where excessive roll can compromise cargo safety, reduce operational efficiency, and hinder precision operations such as offshore loading, seismic surveying, or ROV deployment. A wide spectrum of anti‑roll methods has been developed, from passive bilge keels and tuned anti‑roll tanks to active stabilizers; see ( Perez and Blanke 2012 ; Perez 2006 ) for a comprehensive review. One approach to roll damping – often called rudder roll damping ( van Amerongen et al. 1990 ) – exploits the ship’s vectoring actuators, such as conventional rudders, azimuthing thrusters, and Voith‑Schneider propellers (VSPs), to generate the anti‑roll moments needed for stabilization. This approach eliminates the need for dedicated roll‑stabilizing hardware. However, because the same actuators also serve heading and position control, it requires a careful trade-off between steering performance and roll-damping effectiveness ( Perez 2006 ; Kapitanyuk et al. 2020 ) . Moreover, the nonminimum-phase characteristics of roll dynamics impose fundamental limits on achievable closed‑loop performance ( Goodwin et al. 2000 ) . Since thrusters and rudders are primarily optimized for steady course‑keeping and station‑keeping, commanding them to produce high‑frequency lateral forces at a vessel’s natural roll frequency significantly accelerates mechanical wear and reduces their service life. Therefore, dedicated roll stabilizers are generally favored over rudder‑based roll damping. These solutions span from passive and semi‑passive devices – bilge keels, anti‑roll tanks, and fixed or variable‑geometry fins – to fully active systems, such as hydraulic or electric fin stabilizers and gyroscopic units, which leverage sensors and advanced control algorithms for optimal roll reduction at the expense of greater energy consumption and mechanical complexity. For yachts and small passenger vessels, the choice is typically between a gyroscopic stabilizer and hull‑mounted stabilizer fins. At cruising speeds and in severe roll conditions, fin stabilizers typically outperform gyroscopic stabilizers, as fins do not face mechanical saturation limits like gyros, which can reach their maximum tilt angle. Moreover, fins require less power per unit of damping torque under these conditions. Additionally, hull-mounted fin actuators preserve valuable internal space, and generally have simpler, less demanding maintenance requirements compared to gyrostabilizers. However, traditional fins lose their effectiveness at low speeds, since the hydrodynamic lifting forces they generate decrease proportionally to the square of the vessel’s speed through the water ( Kula 2014 ) . Zero‑speed fins overcome this limitation by employing a drag‑based mechanism, actively oscillating (flapping) the fin to “pump” water and thus generate substantial stabilizing forces, even when the vessel is stationary or moving slowly. These active oscillations are inspired by the motions of fish fins and bird wings. In recent years, zero‑speed (or flapping) fin stabilizers have become increasingly popular. A growing body of research has focused on accurately modeling the hydrodynamic forces acting on fins during low‑speed operation, optimizing fin geometry, and developing advanced control algorithms to enhance performance ( Liang et al. 2018 ; Zhang et al. 2019 ; Song et al. 2019 ; Song et al. 2020b ; Wei and Yang 2021 ; Xu et al. 2025 ) . In this paper, we present control and identification techniques for a ship roll-stabilization system featuring two zero-speed fins, currently under development by Navis JSC in collaboration with shipbuilding plants. The key features of the proposed algorithms are: first, the explicit consideration of the nonlinear drag force acting on the fins; and second, the enforcement of constraints on both fin angle and angular rate, as dictated by the limitations of the hydraulic actuator. Control designs that explicitly account for these nonlinearities result in complex optimization problems with non-convex constraints. These are typically addressed using advanced techniques, including robust MPC frameworks ( Malekizade et al. 2016 ) or heuristic methods such as genetic algorithms ( Song et al. 2020a ) . Since the roll-damping algorithm must be implemented on a low-cost microcontroller and easily adapted to changing sea conditions, it is highly desirable to keep the design as simple as possible and remain within the class of linear control strategies. In this paper, we examine a class of linear controllers and prove the robust stability of the resulting closed-loop system in the presence of bounded disturbances using the circle criterion for incremental stability (strong contraction) ( D’Alto and Corless 2013 ; Bullo 2024 ) . The need for an absolute stability criterion arises from the nonlinear rate–moment characteristics and the saturation of the fin angular rate. While remaining simple, the proposed controller can still be tuned to accommodate varying sea conditions, maintaining a balance between the requirements of global stability and effective roll damping. The remainder of the paper is organized as follows. Section 2 introduces the mathematical model of the vessel’s roll motion. Section 3 addresses the control design and related stability considerations. Section 4 presents simulation results that demonstrate the effectiveness of the proposed controller on a realistic vessel model used by Navis JSC for Hardware-in-the-Loop testing. 2 Mathematical Modelling The ship’s roll motion is driven by the disturbance moment M_{w}(t) , primarily wave-induced, and is counteracted by the control moment M_{u}(t) , which must be delivered by actuators of sufficient speed and power. Figure 1: The ship coordinate system, fin stabilizer angle \delta_{f} 2.1 Vessel Roll Dynamics In the standard right-handed coordinate system (Fig. 1 ), the ship’s roll dynamics are J_{xx}\ddot{\theta}+f_{d}(\dot{\theta})+mgl(\theta)=M_{w}(t)+M_{u}(t), (1) Here, J_{xx} denotes the roll moment of inertia, including added-mass contributions; and mgl(\theta) is the restoring moment. The nonlinear roll-damping moment f_{d}(\dot{\theta}) is often modeled parametrically ( Song et al. 2019 ) as f_{d}(\dot{\theta})=2N_{1}\dot{\theta}+N_{2}|\dot{\theta}|\dot{\theta}, (2) where the hydrodynamic coefficients N_{1} and N_{2} depend on the vessel speed V and typically increase as V grows. In the control‐design phase, both the righting arm l(\theta) and the damping moment f_{d}(\dot{\theta}) are linearized about the equilibrium point, as described below. For anti-roll controller design, the nonlinear ship-roll and fin-actuation dynamics are typically linearized and expressed as the time-invariant model derived as follows: (a) for sufficiently small roll angles, the righting arm can be approximated by l(\theta)\approx h_{\theta}\,\theta , where h_{\theta} is the transverse metacentric height; (b) by applying the describing‐function method Song et al. 2019 ; Chechurin and Chechurin 2017 to the nonlinear damping moment ( 2 ), it can be approximated by the linear function f_{d}(\dot{\theta})\approx N_{\theta}\,\dot{\theta} , where the equivalent coefficient N_{\theta} depends on the vessel’s speed and

Read the complete text