Dissipative response of driven bead-spring-dashpot chains
R. Kailasham · 2025
Read Dissipative response of driven bead-spring-dashpot chains by R. Kailasham (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-05692.txt.
Introduction
Kailasham studies how much work is lost to friction when a model polymer chain is pulled. The chain is a row of spring-dashpot units, fixed at one end and pulled at the other by a harmonic trap. Internal friction inside the chain turns some pulling work into heat, and the amount depends on the setup in ways a single unit cannot predict.
Working by computer simulation, the author varies the chain length, the trap stiffness, and the friction level, under two pulling protocols. Without internal friction, the lost work grows with chain length, as expected. With friction, the pattern flips with stiffness: a stiffer trap makes longer chains lose less work, while a softer trap makes them lose more. The paper shows that no simple link between the friction coefficient and the lost work survives beyond the single-unit case.
Catalog record
| CREATOR | R. Kailasham |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 71 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-05692
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Dissipative response of driven bead-spring-dashpot chains R. Kailasham Abstract The work dissipated in pulling a polymer chain with internal friction is numerically calculated by considering a sequence of N N bead-spring-dashpots tethered at one end and being pulled at the other using a harmonic trap via linear and symmetric protocols. The variation of the dissipation with the chain length, pulling trap stiffness, and the internal friction parameter are examined in detail for both the protocols. In the limit of high trap stiffness: (i) the dissipation d e c r e a s e s decreases with N N for chains with internal friction, keeping all other parameters constant, and (ii) the relationship between the dissipation and internal friction parameter deviates from linearity as N N is increased. Consequently, a closed-form expression between the dissipated work in driving a chain of spring-dashpots and the damping coefficient of a single dashpot can be written only for the case of N = 1 N=1 [as shown in Phys. Rev. Res. 2 , 013331 (2020)] and not for the general case of N > 1 N>1 . I Introduction The dynamics of conformational transitions in polymer molecules is governed not only by the solvent friction, but also by intramolecular interactions whose effects are collectively referred to as internal friction or internal viscosity Kuhn and Kuhn 1945 ; Booij and van Wiechen 1970 ; Manke and Williams 1987 ; Hua and Schieber 1995 ; Hua, Schieber, and Manke 1996 ; Kailasham, Chakrabarti, and Prakash 2018 ; Mackay, Liang, and Halley 1992 ; Massa, Schrag, and Ferry 1971 ; Ansari et al. 1992 ; Jas, Eaton, and Hofrichter 2001 ; Qiu and Hagen 2004 ; Cellmer et al. 2008 ; Hagen 2010 ; Wensley et al. 2010 ; Soranno et al. 2012 ; de Sancho, Sirur, and Best 2014 ; Echeverria, Makarov, and Papoian 2014 ; Schulz, Miettinen, and Netz 2015a ; Samanta and Chakrabarti 2016 ; Soranno et al. 2017 ; Poirier and Marko 2002 ; Murayama, Wada, and Sano 2007 ; Khatri et al. 2007 ; Alexander-Katz, Wada, and Netz 2009 ; Einert et al. 2011 ; Ojala et al. 2014 ; Mondal, Adhikari, and Sharma 2020 ; Nandagiri et al. 2021 (IV). The rheological consequences of internal friction Kuhn and Kuhn 1945 ; Booij and van Wiechen 1970 ; Manke and Williams 1987 ; Hua and Schieber 1995 ; Hua, Schieber, and Manke 1996 ; Kailasham, Chakrabarti, and Prakash 2018 include the appearance of a stress jump at the inception of shear flow Mackay, Liang, and Halley 1992 , and a non-vanishing dynamic viscosity in the high frequency limit Massa, Schrag, and Ferry 1971 of small amplitude oscillatory shear experiments. In the biophysical context, internal friction slows down of the reconfiguration or folding time of the molecule Ansari et al. 1992 ; Jas, Eaton, and Hofrichter 2001 ; Qiu and Hagen 2004 ; Cellmer et al. 2008 ; Hagen 2010 ; Wensley et al. 2010 ; Soranno et al. 2012 ; de Sancho, Sirur, and Best 2014 ; Echeverria, Makarov, and Papoian 2014 ; Schulz, Miettinen, and Netz 2015a ; Samanta and Chakrabarti 2016 ; Soranno et al. 2017 . While these two aspects of IV have received immense scrutiny, the mechanical or dissipative consequence of internal friction remains less thoroughly explored Poirier and Marko 2002 ; Murayama, Wada, and Sano 2007 ; Khatri et al. 2007 ; Alexander-Katz, Wada, and Netz 2009 ; Einert et al. 2011 ; Ojala et al. 2014 ; Mondal, Adhikari, and Sharma 2020 ; Nandagiri et al. 2021 . The work dissipated in the forced uncoiling of condensed DNA globules Murayama, Wada, and Sano 2007 ; Ojala et al. 2014 , the viscoelastic response of single molecules of polysaccharides Khatri et al. 2007 , ciliary oscillations in microorganisms Mondal, Adhikari, and Sharma 2020 , are all modulated by the presence of a frictional mechanism that is not hydrodynamic in nature. Given the wide range of contexts in which internal friction modulates the mechanical response of molecules, it is therefore essential to quantify the work required in subjecting polymer chains with internal friction to various driving protocols. In this paper, we address this knowledge gap by analytically deriving the appropriate expressions for a coarse-grained polymer model. Figure 1: A polymer chain with N+1 beads, with one end ( y_{0} ) tethered and the other ( y_{N} ) connected to an optical/laser trap whose center Y(t) moves according to a deterministic protocol. The spring-dashpot arrangement that connects adjacent beads is composed of a Hookean spring of stiffness H and a dashpot with damping coefficient K . The stiffness of the steering spring is given by cH , with c>0 . The motion of the N beads numbered y_{1},y_{2},\cdots,y_{N} is governed by eq. ( 4 ). The concept of internal friction is an emergent phenomenon, and need not be invoked in an all-atom model of polymeric chains in which the interaction between various segments is specified completely in terms of bonded and non-bonded potentials Schulz et al. 2012 ; Schulz, Miettinen, and Netz 2015b . The process of coarse-graining such a detailed model into a chemistry-agnostic bead-spring chain model requires the inclusion of an additional frictional term de Gennes 1979 ; Khatri and McLeish 2007 . The mathematical form of the additional term to be included depends on whether one is trying to model wet or dry internal friction Kailasham, Chakrabarti, and Prakash 2020 . This classification is based on if the dissipation vanishes (wet) or persists (dry) in the extrapolated limit of zero solvent viscosity, respectively. The distinction is purely notional Schulz, Miettinen, and Netz 2015b , and it is possible for a single polymer to possess both types of internal friction. Cohesive interactions between the segments of a polymer chain Alexander-Katz, Wada, and Netz 2009 ; Einert et al. 2011 ; Han, Hilburg, and Alexander-Katz 2022 are known to result in wet internal friction, as discussed in Ref. 33 . In a coarse-grained model, these interactions are represented using non-bonded potentials that operate between any two beads in the polymer. The scaling of the work dissipated due to wet internal friction as a function of the number of beads in the chain has been investigated in detail by Netz and coworkers Alexander-Katz, Wada, and Netz 2009 ; Einert et al. 2011 . Resistance to dihedral angle rotation has been attributed as a source of dry internal friction Fixman 1988 ; Jas, Eaton, and Hofrichter 2001 ; Khatri and McLeish 2007 ; Echeverria, Makarov, and Papoian 2014 ; de Sancho, Sirur, and Best 2014 ; Daldrop et al. 2018 ; Świa̧tek, Kuczera, and Szoszkiewicz 2024 , and is represented in coarse-grained models by the inclusion of a dashpot in parallel with each spring of a bead-spring-chain model Kuhn and Kuhn 1945 ; Booij and van Wiechen 1970 ; Manke and Williams 1987 ; Dasbach, Manke, and Williams 1992 ; Hua and Schieber 1995 ; Kailasham, Chakrabarti, and Prakash 2021 . The challenge of developing a numerical algorithm to simulate a bead-spring-dashpot chain with greater than two beads is an arduous one, and has only been surmounted recently Kailasham, Chakrabarti, and Prakash