Figure 5
: · 2025
Read Figure 5 by : (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-05684.txt.
Introduction
Logan Hanssler and a large student team describe the PULSE-A mission in a 2025 paper, under the clean title given in the text. The mission, run at the University of Chicago, aims to send data from a small satellite to Earth by laser light instead of radio. Laser links can carry far more data, weigh less, and cost less, which suits small student-built craft.
The craft pairs a compact laser unit with a ground station built around an amateur telescope. Its goals are to give undergraduates hands-on space work, to share open designs for laser gear, and to test a method that encodes data in the twist of light. More than sixty students built and run the project, and the paper stresses the value of student leadership in such work.
Catalog record
| CREATOR | : |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 45 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-05684
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Figure 5 : Abstract SSC25-RAVII-03 PULSE-A Mission Overview: Optical Communications for Undergraduate Students Logan Hanssler , Seth Knights , Graydon Schulze-Kalt , Juan Ignacio Prieto Asbun , Robert Pitu , Lauren Ayala , Rohan Gupta , Vincent Redwine , Spencer Shelton , Catherine Todd , Maya McDaniel , Sofia Mansilla , John Baird , Mason McCormack , Leah Vashevko , Tian Zhong University of Chicago [email protected] Michael Lembeck StarSense Innovations Champaign, IL, USA ABSTRACT Recent advances in the size, weight, and power (SWaP) requirements for space-based sensing have dramatically increased the demand for high-bandwidth downlink. However, high data rate RF transceivers still pose significant SWaP and cost restrictions, especially for university-class CubeSat missions. Optical communication may provide a solution to this challenge, enabling data transmission with order-of-magnitude rate increases over RF while being both secure and SWaP-efficient. The Polarization-modUlated Laser Satellite Experiment (PULSE-A) is a University of Chicago mission to demonstrate optical downlink at a data rate of up to 10 Mbps using circular polarization shift keying (CPolSK). PULSE-A comprises a < 1.5U Optical Transmission Terminal, 3U CubeSat Bus, Optical Ground Station (OGS) employing an amateur telescope, and RF Ground Station (RFGS), all of which are being designed and integrated by a team of over 60 undergraduate students. The mission objective is threefold: (1) to provide hands-on educational experiences for undergraduate students, (2) to make hardware for optical communication systems more accessible via open-source design, and (3) to explore the viability and potential advantages of using CPolSK for optical downlink. PULSE-A serves an essential educational purpose by providing University of Chicago students with the opportunity to design, build, test, and fly a spacecraft. All engineering and leadership roles on the PULSE-A Team are filled by undergraduate students from the University of Chicago Space Program (UCSP), the University’s only Registered Student Organization dedicated to engaging students in aerospace engineering projects. UCSP fulfills a unique role at the University given the absence of any conventional mechanical, electrical, or aerospace engineering programs. PULSE-A is the primary opportunity for the University of Chicago’s undergraduate students to learn and apply skills in these engineering fields, as the large majority of the mission’s hardware and software is being developed in-house. With over 100 students having worked on the mission since UCSP’s inception, PULSE-A has had a profound impact on the University’s student body. In this work, we present an overview of the mission, and we describe the PULSE-A Team’s learning-oriented approach to program management and engineering. We especially emphasize the importance of student leadership in PULSE-A’s development process and the resulting benefits for the University of Chicago community. We also highlight takeaways from the experience of founding and operating an undergraduate student-led CubeSat program, particularly regarding team organization, knowledge transfer, and collaborative learning in the context of limited prior institutional knowledge on small satellites. INTRODUCTION The Need for Space-Based Optical Communications Over the last two decades, advances in space-based sensing have dramatically increased the amount of information, both commercial and scientific, that must be transmitted from space to ground. The proliferation of CubeSat technologies has enabled novelly small, cheap, and accessible resources for space mission development than ever before. Despite the expansion of this technology and the dramatic increase in the data acquisition capabilities of such satellites, the size, weight, and power (SWaP) constraints of CubeSat missions often pose a bottleneck to downlink communication systems [ 1 ] . Free-space optical communications offers a clear solution to this bottleneck, enabling order-of-magnitude higher data rates due to significantly smaller beam divergence (i.e. more efficient energy usage) and technological advances in ground-based telecommunications and fiber optics technology [ 2 ] . The modern development of optical communication-based satellite networks opens the door not only to optical downlink, but also to high-throughput inter-satellite data relays. Even considering the more adverse effects of the atmosphere on optical links compared to RF links, the vastly increased data rates often still deliver more data to the ground with substantially less contact time. This need for greater data throughput is especially important in scientific and academic missions with smaller budgets. In such cases, the especially high cost of large throughput RF communications systems (in particular at CubeSat SWaP) may create a fundamental barrier in collecting and completing vital research. Additionally, existing commercial off-the-shelf (COTS) optical communication terminals for CubeSats have yet to be both widely available and affordable enough to be used effectively on such missions. Thus, continued technological development is necessary to improve the reach and reliability of optical communications systems for CubeSats, and to help them impact some of the most important scientific work. PULSE-A Mission Goals The PULSE-A mission’s primary technical objective is to demonstrate space-to-ground optical communication at up to 10 Mbps using circular polarization shift keying (CPolSK). Consequently, the mission aims to provide flight qualification for custom hardware and software that facilitates polarization-based optical downlink. The custom designs are made to be open source, thus promoting accessibility for future optical communication missions. Furthermore, while optical downlink using CPolSK has been previously discussed in literature [ 3 ] , it has yet to be realized in an optical downlink mission. PULSE-A will serve as a probe to explore the viability and challenges of CPolSK for optical downlink. PULSE-A also serves an essential role in education. The mission is being developed by a team of over 60 undergraduate students at the University of Chicago. Lacking the context of a traditional engineering program, the mission’s primary objective is to serve a unique educational role for the University’s student body. By working on PULSE-A, students are able to work collaboratively in a self-motivated environment to learn skills in mechanical, electrical, software, optical, and systems engineering, as well as a number of related fields. The PULSE-A Team structure and design philosophy are oriented toward learning as the mission’s top priority. To accomplish PULSE-A’s goals, the following key mission systems are being designed: • Custom < 1.5U Optical Payload (acting as the transmitting terminal) and custom Optical Ground Station (OGS) (acting as the receiving terminal), each consisting of COTS optical components and custom mechanical and electrical hardware. • Custom 3U Bus consisting of a custom Electrical Power System (EPS), Command and Data Handling (CDH), and Thermal Subsystem as well as COTS Attitude Determination and Control System (ADCS), RF Communications Subsystem, and Structure. • Custom Radio Frequency Ground Station (RFGS) consisting of COTS components, to be established permanently at the University of Chicago. • Custom Flight Software (FSW) based on NASA Goddard Space Flight Center’s open-source core Flight System (cFS) framework [ 4 ] . Concept of Operations The PULSE-A CubeSat will be launched through NASA’s CubeSat Launch Initiative (CSLI) no later than 2028 [ 5 ] (Step 1 in Fig. 1 ). Launch is currently scheduled for March 2027 and is planned for a 45º–50º inclination at 450 km–550 km. Figure 1 : Concept of Operations Visualization Before any optical passes are attempted, RF communications will be established to monitor the Satellite via downlinked telemetry. PULSE-A will use its GPS module to determine its coordinates, which will then be downlinked over RF. The Ground Station will use the GPS coordinates to model the Satellite’s orbital trajectory, thus informing the Ground Station’s pointing. The Satellite