Fast nanothermometry based on direct electron detection of electron backscattering diffraction patterns
Ryan Gnabasik, Razan O. Nughays, Ashlynn Overholser, Vijay Kumar, Shantal Adajian, Nicolò Maria della Ventura, Daniel S. Gianola, Bolin Liao · 2025
Read Fast nanothermometry based on direct electron detection of electron backscattering diffraction patterns by Ryan Gnabasik, Razan O. Nughays, Ashlynn Overholser, Vijay Kumar, Shantal Adajian, Nicolò Maria della Ventura, Daniel S. Gianola, Bolin Liao (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-05467.txt.
Introduction
Gnabasik and seven colleagues measure temperature at the nanoscale with electron patterns in twenty twenty-five. Tiny devices need precise heat maps, but optical and probe methods have limits. Their method reads temperature from electron backscatter diffraction patterns in a microscope. Heat blurs the pattern's bands in a measurable way.
Simulations set sensitivity limits for four semiconductor materials. A Fourier analysis captures the subtle blurring across the whole pattern. On silicon, experiments matched the predicted sensitivity closely. They reached thirteen kelvin uncertainty with a ten second capture. Temperature maps under a heat gradient were also produced. The authors offer the method as a practical tool for device diagnostics.
Catalog record
| CREATOR | Ryan Gnabasik, Razan O. Nughays, Ashlynn Overholser, Vijay Kumar, Shantal Adajian, Nicolò Maria della Ventura, Daniel S. Gianola, Bolin Liao |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 34 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-05467
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Fast nanothermometry based on direct electron detection of electron backscattering diffraction patterns Ryan Gnabasik, Razan O. Nughays, Ashlynn Overholser, Vijay Kumar, Shantal Adajian, Nicolò Maria della Ventura, Daniel S. Gianola, Bolin Liao Abstract Accurate temperature measurement at the nanoscale is crucial for thermal management in next-generation microelectronic devices. Existing optical and scanning-probe thermometry techniques face limitations in spatial resolution, accuracy, or invasiveness. In this work, we demonstrate a fast and non-contact nanothermometry method based on temperature-induced changes in electron backscattering diffraction (EBSD) patterns captured by a high-performance direct electron detector within a scanning electron microscope (SEM). Using dynamical electron simulations, we establish the theoretical temperature sensitivity limits for several semiconductors (Si, Ge, GaAs, and GaN), showing that thermal diffuse scattering (TDS) leads to a measurable smearing of Kikuchi bands in the EBSD patterns. We develop a Fourier analysis method that captures these subtle changes across the full diffraction pattern, achieving a simulated temperature sensitivity of approximately 0.15% per K. Experimental results on silicon confirm a sensitivity of 0.14% per K and achieve a 13-K temperature uncertainty with a 10-second acquisition time, and enable spatial temperature mapping under thermal gradients. Our approach offers a pathway toward practical and high-resolution thermal mapping directly in SEMs, expanding the toolbox for device-level thermal diagnostics. I Introduction Thermal management has become a pressing challenge in developing next generation microelectronic devices with rapidly increasing integration density and power consumption Qin et al. 2023 . For example, peak heat fluxes in state-of-the-art power electronic devices can exceed those on the surface of the Sun. In addition, the rise of artificial intelligence is projected to drastically increase the power consumption in data centers that will require efficient thermal management strategies from the device level to the system level Li et al. 2024 . These developments have called for a paradigm shift towards electro-thermal codesign of future electronic devices Choi et al. 2021 . To enable further advancement in this direction, thermal diagnostic tools with high spatial resolution and temperature sensitivity are indispensible. At the device level, several major thermal issues need to be experimentally diagnosed and theoretically understood: local extreme hot spots in the conducting channel Schleeh et al. 2015 , device/substrate interfacial heat conduction Malakoutian et al. 2025 , and nonideal heat conduction near dislocations and other defects Mion et al. 2006 . These issues critically determine the design strategies for the thermal management of microelectronic devices at the materials and system level. To experimentally probe these effects, however, a common obstacle is the associated small length scale on the nanometer (hot spots) and atomic scale (interfaces and defects), where thermal measurement becomes exceedingly difficult. Furthermore, noncontact thermometry methods are desirable to minimize the impact on device operation during measurements. Existing optical thermometry methods, such as thermo-reflectance measurements, are intrinsically diffraction-limited to a spatial resolution above hundreds of nanometers when using visible light Jiang et al. 2018 ; Schmidt et al. 2009 ; Choudhry et al. 2021 . Steady-state optical thermometry techniques, such as Raman spectroscopy Beechem et al. 2008 , can further suffer from the nonequilibrium distributions among different phonon groups Sokalski et al. 2022 and the complication caused by thermal stresses and electric fields Bagnall et al. 2017 in addition to the limitation of their spatial resolution. Although super-resolution optical thermometry based on upconverting nanoparticles has been demonstrated to probe length scales below the diffraction limit Ye et al. 2024 , it requires the deposition of nanoparticles onto the sample as temperature sensors, which can create practical challenges when diagnosing electronic devices. Another category of thermometry techniques with nanometer spatial resolution relies on scanning probes. One example is scanning thermal microscopy (SThM) Zhang et al. 2020 , where temperature sensors and/or heaters are fabricated onto nanoscale scanning tips. Despite the demonstrated nanometer spatial resolution and milli-Kelvin-level temperature sensitivity Reihani et al. 2024 , the accuracy of SThM requires careful calibration and modeling of tip-sample interactions to avoid the interference of contact thermal resistance and topographical defects Menges et al. 2016 . Another example is thermometry based on scanning near-field optical microscopy (SNOM), which can reach a spatial resolution down to tens of nanometers by combining an optical probe with a scanning tip or fiber Goodson and Asheghi 1997 ; Ezugwu et al. 2017 . However, parasitic heat transfer between the sample and the tip or fiber still poses challenges in interpreting these measurements. Electron beams are alternative probes to realize nanometer-scale thermometry. Inside transmission electron microscopes (TEMs), multiple electron detection modes have been explored for nanoscale temperature mapping. For example, Wehmeyer et al. examined the temperature-dependent thermal diffuse scattering (TDS) Wang 2003 of electrons as a local temperature probe Wehmeyer et al. 2018 and reported 5-K temperature uncertainty with an acquitision time of 96 s. TDS arises because of electron-phonon interactions that scatter electrons from their elastic Bragg reflections into the diffuse background. TDS has a higher temperature sensitivity than thermal expansion Niekiel et al. 2017 and is universal in solid materials. Alternatively, electron energy loss spectroscopy (EELS) has been used to probe local temperature with nanometer spatial resolution based on the temperature-dependence of plasmon Mecklenburg et al. 2015 or phonon peaks Idrobo et al. 2018 . In general, TEM-based techniques require specialized fabrication of thin samples and are thus not suitable for thermal diagnosis of operating microelectronic devices. In contrast, scanning electron microscopes (SEMs) are more suitable platforms to probe microelectronic devices due to their minimal sample preparation requirements. Khan et al. have quantified the temperature dependence of secondary electron emission as a potential signal channel to map local temperatures inside an SEM Khan et al. 2018 and reported an 8-K temperature resolution with a requisition time of 60 s. Alternatively, Wu and Hull demonstrated the temperature sensitivity of another detection mode in an SEM, electron backscatter diffraction (EBSD), where TDS disrupts the coherent electron diffraction process and thus reduces the intensity of the coherent Kikuchi bands while increasing the intensity of the diffuse background in EBSD diffraction patterns Wu and Hull 2012 . With a conventional charge-coupled-device (CCD) EBSD detector, they realized a practical temperature resolution of around 10 K (with unspecified acquisition time) by analyzing the intensity of a single Kikuchi band in silicon (Si), which was limited by both inherent material properties and experimental conditions. Subsequently, they showed that the temperature dependence of the Debye-Waller B factor, the backscatter electron yield, and the lattice constant are the main factors that control the inherent temperature sensitivity of a given material Wu and Hull 2013 . In this work, we further advance the EBSD-based nanothermometry in an SEM by (1) establishing the inherent temperature sensitivity in several technologically important semiconductors – Si, germanium (Ge), gallium arsenide (GaAs), and gallium nitride (GaN) – via dynamical electron simulation; (2) developing a new data processing protocol utilizing the smearing effect of Kikuchi bands in full EBSD patterns instead of an individual Kikuchi band; and (3) Obtaining significantly higher temperature resolution with shorter acquisition time using a direct electron detector. We further demonstrate spatial mapping of a temperature gradient in Si using this technique and highlight the remaining challenges. Our work advances the fundamental understanding of the temperature effect on EBSD patterns and paves the way towards