Torsional Behavior of Carbon-Doped Ferrous Nanowires: Atomic-Scale Insights from MD Simulations Journal: Computational Material Scinece

Charith L. Hirimuthugodage, Laalitha S.I. Liyanage, K. G. S. H. Gunawardana · 2025

Read Torsional Behavior of Carbon-Doped Ferrous Nanowires: Atomic-Scale Insights from MD Simulations Journal: Computational Material Scinece by Charith L. Hirimuthugodage, Laalitha S.I. Liyanage, K. G. S. H. Gunawardana (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-04901.txt.

Introduction

Charith Hirimuthugodage, Laalitha Liyanage, and K. Gunawardana twisted iron nanowires in simulation to see what carbon does to them in a 2025 paper. Nanowires of iron and carbon-doped iron, aligned along one crystal direction, were subjected to torsion in molecular dynamics simulations using a potential fitted to iron-carbon interactions in the body-centered cubic structure. The sweep covered carbon content from pure iron up to ten percent, temperatures from near zero to nine hundred kelvin, and three wire thicknesses.

More carbon weakened grain boundaries, lowering the peak shear stress the wire withstands before its critical twist. Heat pushed deformation from elastic toward plastic as atomic vibration grew, and thicker wires showed their own size effects. The atomic-scale picture guides designs where iron nanostructures must survive twisting loads.

Catalog record

CREATORCharith L. Hirimuthugodage, Laalitha S.I. Liyanage, K. G. S. H. Gunawardana
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-04901

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Torsional Behavior of Carbon-Doped Ferrous Nanowires: Atomic-Scale Insights from MD Simulations Journal: Computational Material Scinece Charith L. Hirimuthugodage, Laalitha S.I. Liyanage, K. G. S. H. Gunawardana Abstract This study investigates the torsional mechanical properties of pristine iron (Fe) and carbon-doped iron (FeC) nanowires with [001] orientation through molecular dynamics simulations utilizing the Modified Embedded Atom Method (MEAM) potential developed by Liyanage et al. for accurately modeling Fe-C interactions in body-centered cubic structures. Systematic analysis across carbon concentrations (0 - 10%), temperatures (1 - 900 K), and cross-sectional dimensions 10a, 13a, 15a, ( where a = 2.81 Å represents the lattice constant ) within the LAMMPS environment reveals that increasing carbon content weakens grain boundaries, reducing the maximum shear stress required to reach the critical torsional angle, while higher temperatures promote phase transitions from elastic to plastic deformation due to enhanced atomic vibrations, and larger cross-sections exhibit higher shear stress resistance attributed to strengthening effects from the outer atomic layers. By elucidating these interrelationships between carbon content, temperature, and dimensional factors, this work provides fundamental insights into the mechanical behavior of FeC nanowires under torsional loading conditions, offering valuable guidance for their potential applications in nanoelectromechanical systems, nanorobotic actuators, and advanced structural materials where precise control of mechanical properties is essential. † † graphicalabstract: † † highlights: Atomic-Scale Insights into Carbon Doping Effects: This study reveals that carbon doping weakens the torsional load-bearing capacity of ferrous nanowires, with higher carbon concentrations diminishing the material’s shear strength and disrupting its elastic-plastic behavior. These findings provide crucial atomic-scale understanding of impurity-driven mechanical property degradation. Comprehensive Impact of Temperature and Size Effects: The research demonstrates that increasing temperature reduces torsional strength due to enhanced lattice instability, while larger cross-sectional sizes improve shear stress tolerance through delayed fracture propagation. This dual analysis offers predictive insights for designing temperature-resilient and size-optimized nanostructures. One-dimensional metallic nanostructures have received extensive attention due to their unique electrical, optical, and mechanical properties [ 1 ] , and have been applied to various micro/nano devices. Among these nanowires, carbon-doped iron nanowires have emerged as critical components with diverse applications due to their enhanced performance characteristics [ 2 ] . In these devices, nanostructures prepared as structural components are subjected to miscellaneous loadings inevitably. It is fundamental to study and comprehend the mechanical properties and deformation behaviors of these nanostructures, which provides a good reference for robust device design. Typical loading measurements like torsion on nanowires are hard to carry out in the laboratory, while molecular dynamics (MD) simulations provide a feasible method to implement the examinations and observe the details during loadings. By modeling the response of nanostructures to torsional stress, these computational studies provide valuable insights into their behavior. Extensive molecular dynamics (MD) investigations have been conducted on the mechanical properties of iron-based nanowires under tensile loading conditions. Nadeesha et al. [ 3 ] systematically examined the tensile mechanical properties of pure iron and iron-carbon nanowires, demonstrating that the mechanical behavior exhibits strong dependence on carbon concentration and temperature. In complementary work, Sainath et al. [ 4 ] investigated the tensile deformation and fracture mechanisms of [111] body-centered cubic (BCC) Fe nanowires, revealing that at low temperatures (10–375 K), nanowires undergo yielding through sharp crack formation and exhibit predominantly brittle failure modes. Comparatively torsional deformation studies of Fe-C nanowires remain absent from the literature. The available torsional investigations have focused primarily on other metallic nanowire systems. Yang et al. [ 5 , 6 ] conducted comprehensive studies on the torsional behavior of copper-aluminum core-shell nanowires and pure copper nanowires, identifying that dislocation ring structures at the interface significantly enhance the stability of core-shell nanowires despite lattice mismatch. Their findings further revealed that while torsion rates do not substantially influence elastic properties, a modest strengthening effect is observed at elevated torsion rates. Additionally, Yang et al. [ 7 ] investigated the electro-plastic behavior of copper nanostructures under torsion, establishing that the strength of single-crystal copper nanowires increases with extended length, reduced torsion rate, and decreased operating temperature. Further studies include investigations on copper nanowires by Gao et al. [ 8 ] , aluminum nanowires by Sung et al. [ 9 ] , and six-fold twinned \alpha -ferrite nanowires by Li et al. [ 10 ] . While the aforementioned studies provide valuable insights into various mechanical properties of iron-based and other nanowires, the torsional behavior of carbon-doped iron nanowires remains largely unexplored, highlighting a significant gap in the literature. In this work, we investigate the torsional properties of Fe-C nanowires. This study employs molecular dynamics simulations to examine the effects of carbon doping concentration, temperature, and cross-sectional size on the torsional behavior of these nanostructures. By analyzing the atomic-scale mechanisms governing the torsional strength and failure of these nanostructures under varying conditions, we aim to provide insights that can aid in designing stronger and more efficient nanodevices for nanoelectromechanical systems (NEMS), detectors, actuators, and energy storage applications. Methodology Large scale atomic/molecular massively parallel simulator (LAMMPS) [ 11 ] is employed to perform the MD simulations. The modified embedded atom method (MEAM) potential for Fe-C systems, developed by Liyanage et al. [ 12 ] , is chosen to describe the interaction among atoms, which has been widely used in Fe-C nanowire studies [ 3 ] and accurately describes the body-centered cubic (BCC) iron structure, Fe-C systems such as cementite (Fe3C), L12 and B1 structures, as well as C interstitials in Fe BCC lattice. The whole model, placed in the center of a simulation box, is constructed with circular cross-section nanowires with ferrous atoms arranged in a perfect BCC lattice. The lattice orientations of [100], [010], and [001] are in the direction of the X, Y, Z axes of the Cartesian coordinate. Both ends of the model (colored in yellow) are the load regions, and the middle section (colored in red) is the operating part Figure 2 . For the initial configuration with a radius of 10a and a length of 100a (0% carbon doping), the system consists of approximately 15,900 atoms. The load regions are set as rigid bodies, while the atoms of the operating part are allowed to move freely without any stress constraints to ensure the nanowire deforms naturally during loading. Carbon atoms are randomly distributed in the iron lattice at concentrations with different concentrations. Shrink-wrapped boundary conditions are applied to the three axial directions, and the time step is 1 femtosecond. The simulation process constitutes three sequential stages: energy minimization (I), thermal equilibration (II), and torsion loading (III). Initially, the nanowire undergoes energy minimization using the conjugate gradient method [ 13 ] to eliminate any unfavorable atomic configurations. Then the atoms are assigned initial velocities randomly according to the Maxwell-Boltzmann distribution and equilibrated for 100,000 steps (100 ps) using the NVT canonical ensemble with the Nose-Hoover thermostat [ 14 ] to attain equilibrium at the specified temperature. Subsequently, torsional loading is applied by rotating both end regions in opposite directions (the top layer revolves anticlockwise and the bottom layer clockwise when observed from the top) around the Z-axis at a constant angular velocity of 2 × 10 11 degrees/second. After each 1- degree rotation, the system is allowed to relax for 20 ps to ensure the nanowire attains a

Read the complete text