Heat transfer modulation in Phase Change Materials via fin insertion Journal: International Journal of Heat and Mass Transfer

Paolo Proia, Mauro Sbragaglia, Giacomo Falcucci · 2025

Read Heat transfer modulation in Phase Change Materials via fin insertion Journal: International Journal of Heat and Mass Transfer by Paolo Proia, Mauro Sbragaglia, Giacomo Falcucci (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-04851.txt.

Introduction

Materials that store heat by melting can smooth out swings in warmth, but they melt slowly when heat spreads by still flow alone. Paolo Proia, Mauro Sbragaglia, and Giacomo Falcucci use simulations to test a fix: a fin that juts into the cell from the heated side. Their 2025 study models a square cell where a solid melts under heat and buoyant flow.

The fin stirs stronger flow and speeds heat into the bulk, which cuts the time for a full melt. The team varies the fin's length and height across a large set of runs. They also vary two scores that weigh buoyant flow against spread, and stored heat against melt heat. The result is a map of which fin shapes pay off most, for use in heat storage design.

Catalog record

CREATORPaolo Proia, Mauro Sbragaglia, Giacomo Falcucci
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-04851

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Heat transfer modulation in Phase Change Materials via fin insertion Journal: International Journal of Heat and Mass Transfer Paolo Proia, Mauro Sbragaglia, Giacomo Falcucci Abstract We leverage a large set of numerical simulations to study optimized geometrical configurations for Phase Change Materials (PMCs) cells. We consider a PCM cell as a square enclosure with a solid substance that undergoes melting under the effect of a heat source from one side and under the effects of buoyancy forces. Moreover, an additional source fin with prescribed length l l and height h h protrudes into the cell perpendicularly from the heat source. The fin prompts enhanced heat transfer and convection within the PCM cell, thus shortening (in comparison to a finless cell) the melting time t m t_{m} needed for all the PCM material to melt and transit from the solid to the liquid phase. This improvement is systematically studied as a function of the fin geometrical details ( l l , h h ), as well as the Rayleigh number Ra \operatorname{Ra} – encoding the importance of buoyancy forces with respect to diffusion/dissipation effects – and the Stefan number St \operatorname{St} – encoding the importance of sensible heat with respect to latent heat. Overall, our systematic study in terms of the free parameters l l , h h , Ra \operatorname{Ra} and St \operatorname{St} offers inspiring insights to optimize the structure of a PCM cell during its manufacturing process and suggests optimal operating conditions for such geometrical configurations. 1 Introduction The exploitation of storage and buffer technologies is required to mitigate the inconsistency of renewable energy sources [ 1 ] . Among the different storage solutions, thermal energy storage via phase change materials (PCMs) is gaining increasing attention in recent years [ 2 ] . PCMs are characterized by large latent heat, allowing the storage of considerable amounts of thermal energy at a given temperature value, which can be fixed a priori by choosing the appropriate material and, thus, its thermal properties. Thermal energy storage (TES) systems are widely employed in many sectors, from buildings to solar plants, from battery management to hydrogen-based energy systems, since heat recycling is a key topic in many aspects of the ecological transition [ 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 ] . The main drawback in the exploitation of PCMs for TES lies in their limited thermal conductivity, leading to poor power performance, which has prompted a vast scientific investigation for the different strategies to overcome such a limitation during the manufacturing process [ 12 , 6 , 13 , 14 , 15 , 16 , 9 ] , including (but not limited to) modifying the enclosure shape and/or boundaries [ 17 , 13 ] , the insertion of fins [ 18 , 19 , 20 ] , the addition of nanoparticles [ 21 ] , the incorporation of metal foams [ 22 ] or combining two or more of these techniques [ 23 , 6 ] . Given both the complex theoretical and practical aspects of heat transfer, PCM optimization proves to be an interesting topic of research. Among the many optimization routes, in this paper we specifically focus on the insertion of a single source-like fin inside an enclosure filled by a solid substance that undergoes melting. The use of fins to enhance thermal properties is a well-explored field [ 13 , 14 , 9 , 24 , 23 , 20 , 25 , 26 , 18 ] , as they provide a simple yet effective way of improving heat transfer and melting rates. For example, in [ 14 ] PCM cells with a conductive fin were studied, showing that the melting time is reduced by increasing the fin length and lowering the fin height simultaneously. Gao et al. [ 23 ] investigated the combined effects of a porous medium and a fin, finding that the melting speed increases with the length of the fin and a decrease of the heat capacity of the fin. In [ 20 ] , the study on the position and size of a single fin was conducted, comparing the melting rate and finding only the length of the fin to impact on melting speed. The study conducted in [ 26 ] focused on the simulation of a multi-finned PCM system and the subsequent development of an algorithm to estimate melting rates. The authors found that the insertion of multiple fins speeds up the initial part of the melting phase, but once the inter-fin substance is molten, the melting slows down. The authors relate the transition between the two regimes to the fin length. The role of convection with respect to other heat transfer mechanisms is investigated in [ 25 ] : the authors focus on close contact melting, related to the density difference between molten and solid PCM. As the solid phase falls down for gravity, the molten part moves to its sides, keeping a near-constant film thickness between the heated surface and the solid PCM, boosting the thermal transfer. In a configuration with multiple close fins, close contact melting provides a considerable increase in the overall liquefaction. Expanding on the topic of fin shape optimization the authors in [ 18 ] develop a topology optimization method and study the effect of fin number, position, shape and branching structure, finding non-uniform arrays of multi branched fins to be the most beneficial arrangement. In general, the presence of fins is expected to influence the behavior of the system, as their position and size promote the development of convective fluid motions, which play a fundamental role in heat transfer and melting [ 27 , 28 , 29 , 30 ] . Convection is indeed a quite complex phenomenon and the occurrence of melting/solidification triggers highly non-linear behaviors [ 31 , 32 , 33 ] which are dependent on the fluid turbulence and motion [ 34 , 35 , 36 ] , on the substance properties (e.g., its salinity [ 29 ] ), on the relative angle between the temperature gradient and gravity [ 34 , 37 , 38 ] , and, of course, on the boundary conditions [ 39 , 40 , 41 , 17 , 42 , 43 ] . Our aim is to conduct a parametric investigation on the position and size of a single fin, quantifying the cell total melting time and its relation to the formation and structure of convective plumes. The system dynamics will be studied as a function of the characteristic non-dimensional Rayleigh ( \operatorname{Ra} ) and Stefan ( \operatorname{St} ) numbers [ 28 , 33 ] . The results generally confirm that convection-favoring configurations are the most efficient in terms of heat transfer and melting velocity. Interestingly, we show that the optimal geometrical configuration in terms of fin length and height, characterized by the minimal melting time, non-trivially depends on the choice of \operatorname{Ra} and \operatorname{St} . The paper is organized as follows: in section 2 we present the mathematical statement of the problem and discuss the system set-up; in section 3 results and discussion are presented; conclusions will follow in section 4 . 2 Problem Statement and set-up The structure

Read the complete text