Pulsar radio emission height as a function of phase

H. Tong, H. G. Wang · 2025

Read Pulsar radio emission height as a function of phase by H. Tong, H. G. Wang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-04200.txt.

Introduction

Tong and Wang work out, on paper, how high above a pulsar the radio emission at each pulse phase originates. Their treatment assumes a dipole magnetic field geometry. Under those assumptions the emission height can be written directly as a function of phase and the impact angle.

Four results stand out. Emission height follows a quadratic curve in phase, sitting higher at the profile edges than at the center. It is also quadratic in the impact angle, a prediction testable against the precessing pulsar PSR J1906+0746. Larger inclination angles suggest higher emission, other things equal. Assuming curvature radiation or inverse Compton scattering also yields the emitting particles' Lorentz factor by phase.

Catalog record

CREATORH. Tong, H. G. Wang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-04200

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Pulsar radio emission height as a function of phase H. Tong, H. G. Wang Abstract An analytical treatment of the pulsar radio emission height as a function of phase is presented. Based on previous works, assuming a dipole field geometry, the emission height can be expressed as a function of phase and the impact angle. We found that: (1) The emission height is a quadratic function of the phase, given the magnetospheric geometry. The emission height is higher at the edge of the pulse profile than at the center. (2) The emission height is also quadratic function of the impact angle. This point can be compared directly with the observations of the geodetic precessing pulsar PSR J1906+0745. (3) Larger inclination angle may imply a higher emission height, when other parameters are similar. (4) By assuming curvature radiation, or inverse Compton scattering, the Lorentz factor of the radio emitting particles can be obtained as a function of phase. \volnopage Vol.0 (20xx) No.0, 000–000 keywords magnetic fields – pulsars: general – pulsars: individual (PSR B0329+54)–pulsars: individual (PSR J1906+0745) 1 Introduction The magnetospheric structure and radio emission mechanism is a long standing problem of pulsar studies (Philippov & Kramer 2022). This problem is renewed by the observations of fast radio bursts, which may share similar magnetospheric physics of pulsars (Zhang 2023). From the observational point of view, radio observations have tried to determine the three-dimensional structure of the emission region. The rotating vector model is employed for the polarization position angle of pulsars (Radhakrishan & Cooke 1969; Johnston et al. 2023), from which the magnetospheric geometry may be determined (mainly the inclination angle \alpha and impact angle \beta ). The radius-to-frequency-mapping is proposed for the radio emission height as a function of frequency (Ruderman & Sutherland 1979; Cordes 1978; Wang et al. 2013; Qiu et al. 2023). Various beam forms are envisaged (e.g., core+cone, patchy, fan beam etc, Rankin 1993; Lyne & Manchester 1988; Wang et al. 2014). In order to obtain the three dimensional information of the emission region, the emission height should be determined. It can be determined under different assumptions. The emission height may be obtained by using the pulse width information (Mitra & Rankin 2002). Considering a rotating magnetosphere, the emission height may be determined by measuring the phase shift between polarization position angle curve and intensity curve (Blaskiewicz et al. 1991; Johnston & Kramer 2019). A finite emission height will result in aberration (a rotating magnetosphere) and retardation. The emission height may be determined by the relativistic phase shift of the leading and trailing component of the emission cones (Gangadhara & Gupta 2001; Dyks et al. 2004; Roy et al. 2025). Recent observational progresses have provide us with more information of the emission height. The relativistic phase shift method can determine the emission height for different cones at different phase (Gangadhara & Gupta 2001; Dyks et al. 2004). The geodetic precessing pulsar PSR J1906+0746 exhibits the two-dimensional structure of the emission beam (Desvignes et al. 2019). At the same time, it also demonstates the polarization and emission height for different impact angle \beta . The emission height as a function of \beta is determined in PSR J1906+0746 (Desvignes et al. 2019). With the advancement of FAST, high signal-to-noise ratio observations for more pulsars are available. In order to compare with the FAST observations, the emission height and Lorentz factor as a function of pulse phase are calculated numerically (Wang et al. 2024; Cao et al. 2024). In principle, previous theoretical modeling of pulsar emission height already contain the information of emission height as a function of phase and \beta etc (Gangadhara & Gupta 2001; Dyks et al. 2004; Gangadhara 2004; Wang et al. 2006; Zhang et al. 2007; Lee et al. 2009; Wang et al. 2013; Yuen & Melrose 2014; Roy 2023). But in these previous treatments, either only one emission height is given (e.g., at the edge of the pulse profile, or at the core of pulse profile), or the modeling tries to be as rigorous as possible, which hinders a direct and quick comparison with observations. We note that the emission beam radius, the pulse profile width and the impact angle etc are always small quantities. Therefore, based on previous works, by performing Taylor expansion of these small parameters, an analytical expression for the emission height as a function of phase and \beta is obtained. 2 Pulsar radio emission height as a function of phase 2.1 Analytical treatment Our treatment is based on Zhang et al. (2007). Similar treatment are also employed by the observers to compare it with observations (Lee et al. 2009; Lu et al. 2016; Shang et al. 2021; Wang et al. 2024; Cao et al. 2024). Different from these previous works, we try to provide a simplified and analytical treatment. Assuming a dipole field geometry, the emission height is known once the field line and the magnetic colatitude is known: r=R_{e}\sin^{2}\theta, (1) where R_{e} is the maximum radial extension of the field line, \theta is the magnetic colatitude of the emission point (in the magnetic frame). Observationally, the duty cycle of the pulsar radio emission is relative small (e.g., <0.1 , Johnston & Kramer 2019). This implies that the radio emission point may be near the magnetic axis. Therefore, the magnetic colatitude \theta is a small quantity. For small \theta , the relation between the emission point and line of sight is (Hibschman & Arons 2001; Tong et al. 2021): \theta=\frac{2}{3}\theta_{\rm obs}, (2) where \theta_{\rm obs} is the magnetic colatitude of the line of sight. The pulsar geometry is mainly determined by the inclination angle \alpha (angle between the rotational axis and magnetic axis) and viewing angle \zeta\equiv\alpha+\beta (angle between the rotational axis and line of sight), \beta is also called the impact angle (closest approach between the magnetic axis and line of sight). The magnetic colatitude of the line of sight \theta_{\rm obs} is related to the pulse phase as: \displaystyle\ \cos\theta_{\rm obs}=\cos\alpha\cos\zeta+\sin\alpha\sin\zeta\cos\phi (3) \displaystyle\ =\scriptsize{\cos\alpha\cos(\alpha+\beta)+\sin\alpha\sin(\alpha+\beta)\cos\phi}. (4) The corresponding geometry can be seen in figure 3 in Zhang et al. (2007) or figure 1 in Tong et al. (2021). Here \phi=0 corresponds to the meridian plane defined by the rotational axis and magnetic axis. Again, \beta and \phi may be small quantities. Then the above equation can be simplified using serial expansion: \theta_{\rm obs}^{2}=\sin^{2}\alpha\ \phi^{2}+\beta^{2}. (5) This is just a right triangle with three sides: \beta , \sin\alpha\ \phi and \theta_{\rm obs} . Therefore, the emission height as a function of phase is: \displaystyle r \displaystyle= \displaystyle\frac{4}{9}R_{e}\theta_{\rm obs}^{2} (6) \displaystyle= \displaystyle\frac{4}{9}R_{e}(\sin^{2}\alpha\ \phi^{2}+\beta^{2}). (7) The maximum radial extent of the field line R_{e} may dependent on the inclination angle and phase (Zhang et al. 2007; Lee et al. 2009; Lu et al. 2016). But since the emission height is proportional to \phi^{2} and \beta^{2} . Then, any dependence of R_{e} on \phi will be higher order modifications. Following previous treatment (Wang et al. 2006; Wang et al. 2013), we denote R_{e} as: R_{e}=\frac{1}{\eta^{2}}R_{\rm lc}, (8) where R_{\rm lc} is the light cylinder radius, \eta is a dimensionless quantity. For \eta=1 , R_{e} corresponds to the last open field line. For \eta=0 , R_{e} corresponds to the magnetic axis. For \eta=0.5 , R_{e}

Read the complete text